Terlaris
Menampilkan 865 -900 dari 921 produk
12 24 36
ROBOTIC ARM WORKSTATION - AE-BR
  • AE-BR
Available
6.2.5.5.- APLIKASI WORKSTATION ROBOTIC
AE-BR
Stasiun Lengan Robot
The "AE-BR" is a robotic arm workstation with the programming console included. The robotic arm can command the pneumatic gripper or the electrical driller installed in it.The "AE-BR" workstation is able to perform a lot of functions including:...
Lihat Unit
PIECES FEEDER WORKSTATION - AE-PLC-APS
  • AE-PLC-APS
Available
6.2.5.1.- APLIKASI WORKSTATION PARTS FEED
AE-PLC-APS
Stasiun Pemberi Makan Bagian
The Pieces Feeder Workstation, "AE-PLC-APS", is a unit that works with pneumatics and electro-pneumatics technologies.The function of the "AE-PLC-APS" is to supply pieces and to verify them, if they are acceptable.The pieces will be supplied one...
Lihat Unit
BOTTLING WORKSTATION - AE-PLC-MEMB
  • AE-PLC-MEMB
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-MEMB
Stasiun Pembotolan
The Bottling Workstation, "AE-PLC-MEMB", designed by EDIBON, is an automatic rotary table with a vessel feeding system, a controlled water filling system, a cap feeder, a vessel closing system, and finally, an extraction system to a complete...
Lihat Unit
PNEUMATIC HANDLING AND CONVEYOR BELT - AE-PLC-MACT
  • AE-PLC-MACT
Available
6.2.5.4.- BAGIAN PENANGANAN APLIKASI WORKSTATION
AE-PLC-MACT
Stasiun Penanganan Pneumatik dan Sabuk Konveyor
The Pneumatic Handling and Conveyor Belt, "AE-PLC-MACT", is an automatic handling station with a conveyor system commanded by a PLC. The "AE-PLC-MACT" is composed of a pneumatic handling system that uses vacuum technology to move pieces from the...
Lihat Unit
DRILLING WORKSTATION - AE-PLC-ST
  • AE-PLC-ST
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-ST
Stasiun Pengeboran
The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...
Lihat Unit
MOUNTING WORKSTATION - AE-PLC-M
  • AE-PLC-M
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-M
Stasiun Perakitan
The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...
Lihat Unit
COMPUTER CONTROLLED STEAM STERILIZER - BIEV
  • BIEV
Available
14.3.- PERALATAN BIOMEDIS
BIEV
Sterilisator Uap, Dikendalikan dari Komputer (PC)
The Computer Controlled Steam Sterilization, "BIEV", is a real unit used in many medical and research centers for the correct sterilization of the typical instruments used, avoiding possible contaminating effects produced by infectious...
Lihat Unit
GEARED STUDY - MESE-T
  • MESE-T
Available
7.1.2.2.- RODA GIGI
MESE-T
Studi Roda Gigi
The Geared Study, "MESE/T", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission. The Gear Study,...
Lihat Unit
STATIC PITOT TUBE - FME32
  • FME32
Available
8.1.2.- PENGUKURAN
FME32
Tabung Statis Pitot
The Static Pitot Tube, "FME32", designed by EDIBON, the change in flow speed within a tube can be determined.The Pitot static tube can be moved across the whole cross-section of the tube, and thus to measure the pressure profile.This tube is...
Lihat Unit
DRAINAGE AND SEEPAGE TANK - PDFD
  • PDFD
Available
11.1.11.- FILTRASI, SEDIMENTASI, DAN PENCAMPURAN
PDFD
Tangki Filtrasi dan Drainase
The Drainage and Seepage Tank, "PDFD", unit has been designed for the practical demonstration, visualization and experimental study of the flow through permeable media and flows in subsoil.The "PDFD" unit basically consist of a tank (soils...
Lihat Unit
COMPUTER CONTROLLED DRAINAGE AND SEEPAGE TANK - PDFDC
  • PDFDC
Available
11.1.11.- FILTRASI, SEDIMENTASI, DAN PENCAMPURAN
PDFDC
Tangki Filtrasi dan Drainase, Dikendalikan dari Komputer (PC)
The Computer Controlled Drainage and Seepage Tank, "PDFDC", has been designed by EDIBON for the practical demonstration, visualization and experimental study of the flow through permeable media and flows in subsoil.The "PDFDC" basically consist of...
Lihat Unit
SOIL/WATER MODEL TANK - PTSA
  • PTSA
Available
13.1.- HIDROLOGI DAN HIDROGEOLOGI
PTSA
Tangki Pemodelan Tanah/Air
The Soil/Water Model Tank "PTSA" is a laboratory scale unit designed to study the most common surface irrigation systems, as well as to investigate the surface and sub-surface effects of applying water.The "PTSA" unit is mounted on a movable bench...
Lihat Unit
SEDIMENTATION TANK - PDS
  • PDS
Available
11.1.11.- FILTRASI, SEDIMENTASI, DAN PENCAMPURAN
PDS
Tangki Sedimentasi
The Sedimentation Tank, "PDS", is a teaching unit, designed by EDIBON, to demonstrate the sedimentation process and to familiarize with the settling principle of discrete particles settling into a tank. It will also allow to study the hydraulic...
Lihat Unit
HYDROSTATIC PRESSURE - FME08
  • FME08
Available
8.1.3.- HIDROSTATIS
FME08
Tekanan Hidrostatik
The Surface Pressure Unit, "FME08", designed by EDIBON, allows to study the center of pressures with a partially or totally submerged quadrant.This unit consists of a quadrant mounted on the arm of a balance that pivots around an axis.When the...
Lihat Unit
AERODYNAMIC TUNNEL FLIGHT DEMONSTRATION UNIT - TADV225/450
  • TADV225/450
Available
8.6.- AERODINAMIKA
TADV225/450
Terowongan Aerodinamis untuk Demonstrasi Penerbangan
The Aerodynamic Tunnel for Flight Demonstration, "TADV225/450", designed by EDIBON, consists of an open wind tunnel in whose working section the model of an aircraft with fixed wings is located. The aircraft is piloted by the user using controls...
Lihat Unit
AERODYNAMIC TUNNEL FOR FLOW VISUALIZATION - TAVF180/100
  • TAVF180/100
Available
8.4.- VISUALISASI ALIRAN
TAVF180/100
Terowongan Aerodinamis untuk Visualisasi Aliran
The Flow Visualization Aerodynamic Tunnel, "TAVF180/100", designed by EDIBON, consists of a vertical conduction in which an upward flow of air and smoke is induced, which passes through different models allowing to study the behavior of the flow...
Lihat Unit
AERODYNAMIC TUNNEL, 300 X 300 MM - TA300/300
  • TA300/300
Available
8.6.- AERODINAMIKA
TA300/300
Terowongan Aerodinamis, 300X300 mm
The Aerodynamic Tunnel, 300 x 300 mm, "TA300/300", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan located at the discharge end of the...
Lihat Unit
AERODYNAMIC TUNNEL, 50 X 250 MM - TA50/250
  • TA50/250
Available
8.6.- AERODINAMIKA
TA50/250
Terowongan Aerodinamis, 50X250 mm
The Aerodynamic Tunnel, 50 x 250 mm, "TA50/250", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan located at the discharge end of the...
Lihat Unit
RESISTANCE TRANSDUCERS - M41
  • M41
Available
2.3.5.- INSTRUMENTASI & KONTROL
M41
Tranduser Resistor
This unit allows different practices related to resistance transducers to be carried out. The unit has five different types of transducers: PTC, NTC, LDR, strain gauge and RTD.The operation of thermistors is based on the principle that the...
Lihat Unit
BORG-WARNER AUTOMATIC TRANSMISSION - MBW
  • MBW
Available
7.2.2.- GEARS, DIFERENSIAL, DAN TRANSMISI
MBW
Transmisi Otomatis BorgWarner
The main distinguishing element of automatic transmissions is its group of epicyclic gearing.The gear assembly of the "MBW" unit consists of:Two sun gears, one to transfer forward gear ratios and one reverse gear.Two sets of planet gears: long and...
Lihat Unit
AXIAL FLOW TURBINE - FME27
  • FME27
Available
8.1.7.- MESIN HIDROLIK: TURBIN
FME27
Turbin Aliran Aksial
With the Axial Turbine, "FME27", designed by EDIBON, it is possible to study and to understand the axial flow turbines which, unlike the radial flow turbines, the working fluid is parallel to the axis of rotation.This unit consists of an axial...
Lihat Unit
COMPUTER CONTROLLED AXIAL FLOW TURBINE - TFAC
  • TFAC
Available
5.3.6.- ENERGI HIDROLIK
TFAC
Turbin Aliran Aksial, Dikendalikan dari Komputer (PC)
The Computer Controlled Axial Flow Turbine, "TFAC", consists of a small-scale turbine with single-stage axial flow input. It has eight nozzles that act as water rings to the rotor, four of which have an incidence angle of 20º and the other four of...
Lihat Unit
RADIAL FLOW TURBINE - FME21
  • FME21
Available
8.1.7.- MESIN HIDROLIK: TURBIN
FME21
Turbin Aliran Radial
The Radial Flow Turbine unit, "FME21", designed by EDIBON, allows the study of a turbomachine, specifically radial turbines capable of handling slower flow levels than other turbine models.This unit consist of a miniature Radial Turbine with two...
Lihat Unit
COMPUTER CONTROLLED RADIAL FLOW TURBINE - TFRC
  • TFRC
Available
5.3.6.- ENERGI HIDROLIK
TFRC
Turbin Aliran Radial, Dikendalikan dari Komputer (PC)
The Computer Controlled Radial Flow Turbine, "TFRC", consists of a small-scale radial flow turbine with two nozzles at 90 degrees to the perpendicular direction of the axis of rotation.In order to raise the fluid, it has a computer controlled pump...
Lihat Unit
COMPUTER CONTROLLED FRANCIS TURBINE - TFC
  • TFC
Available
5.3.6.- ENERGI HIDROLIK
TFC
Turbin Francis, Dikendalikan dari Komputer (PC)
The Computer Controlled Francis Turbine, "TFC", consists of a small-scale Francis Turbine, with a valve that allows flow regulation and has a ring with adjustable guide vanes that allows control of the angle of incidence of the water in the...
Lihat Unit
COMPUTER CONTROLLED TWO -SHAFT GAS TURBINE - TGDEC
  • TGDEC
Available
5.4.- ENERGI KONVENSIONAL
TGDEC
Turbin Gas Dua Poros, Dikendalikan dari Komputer (PC)
The main element of the Computer Controlled Two-Shaft Gas Turbine "TGDEC" is the High Pressure Turbine, which is also called Gas Generative Turbine. It consists of:Radial compressor, which is feeded by atmospheric air to compress it.Tubular...
Lihat Unit
Meminta informasi