AE-PLC-M Stasiun Perakitan

6.2.5.2.- APLIKASI WORKSTATION PROSES

SISTEM INOVATIF

The Mounting Workstation, "AE-PLC-M", has been designed by EDIBON to study the automatic mounting workstations of the computer integrated manufacturing systems.

Lihat uraian umum

Katalog

Spesifikasi Kontes

Ekspansi

ICAI

Perangkat Lunak Pengajaran Berbantu Komputer Interaktif

BERITA TERKAIT

GAMBARAN UMUM

The Mounting Workstation, "AE-PLC-M", designed by EDIBON, is a workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.

The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality control system verifies the height of the pieces and mount them inside of another piece. The "AE-PLC-M" includes a piece feeding system, a quality control system, a pneumatic handling system to complete the mounting process.

The "AE-PLC-M" workstation is designed as a modular system to facilitate the understanding of the unit.

The main components are:

The PLC: is composed by the CPU PLC unit and all the extra modules needed to perform a correct working of the workstation.
The Control Panel: with start/stop button, emergency pushbutton, reset button, light indicators to show current state of the process, etc.
The Pneumatic Circuit: contains the required solenoid valves, the vacuum components, the filters and regulators to assure the appropriate working of the workstation.
The Workstation: is composed by real industrial vertical storage systems such as electric linear actuators, presence sensors, pneumatic gripper, etc.

The "AE-PLC-M" is an independent workstation that can work alone and/or in conjunction with other workstation to make up a complete Flexible Manufacturing System (*).

*The Flexible manufacturing systems product list is available at the "6.- MECHATRONICS and AUTOMATION" area.

LATIHAN DAN PRAKTEK PEDOMAN

LATIHAN PRAKTIS YANG DIANDAL TERMASUK DALAM PANDUAN

Introduction to flexible manufacturing system (FMS).
Introduction to pneumatics and electro-pneumatics.
Study of the sensor detection.
Configuration of a pneumatic application.
Manual control of a mounting system.
Automatic control of a mounting system.
Change the parameters of the mounting process.
Optimization of the process time.
Study and analysis of the faults inserted in the process with the fault generation module.

BARANG YANG DIBUTUHKAN

BARANG TAMBAHAN YANG DISARANKAN

AE-AS

PERALATAN SIMILAR TERSEDIA

AE-PLC-FT

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-FT

Stasiun Penyaringan

The Filtering Workstation, "AE-PLC-FT", designed by EDIBON, is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the...

AE-PLC-MS

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-MS

Stasiun Pencampuran

The Mixing Workstation, "AE-PLC-MS", designed by EDIBON, is a workstation commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different...

AE-PLC-PHD

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-PHD

Stasiun Pelubangan

The Punching Workstation, "AE-PLC-PHD", designed by EDIBON, is a workstation commanded by a PLC. This workstation takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the...

AE-PLC-FS

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-FS

Stasiun Pengisian

The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....

AE-PLC-CRS

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-CRS

Stasiun Pemasangan Tutup Botol

The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...

AE-PLC-APB

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-APB

Stasiun Pembukaan Kaleng

The "AE-PLC-APB" is a bottles opening system commanded by a PLC. The unit is equipped with different containers and a retention system based on a cylinder, in order to allow the Robotic Arm Workstation "AE-BR" or the SCARA Arm Workstation "AE-SCA"...

AUTOMATIC PRESSING WORKSTATION - AE-PLC-P

AE-PLC-P

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-P

Stasiun Penekanan Otomatis

The Automatic Pressing Workstation, "AE-PLC-P", designed by EDIBON, is an workstation commanded by a PLC. The "AE-PLC-P" moves the pieces from the input zone to the pressing zone, once the piece is detected in the pressing zone, the "AE-PLC-P"...

AE-PLC-AT

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-AT

Stasiun Pemasangan Sekrup Otomatis

The Automatic Screwdriving Workstation, "AE-PLC-AT", designed by EDIBON, is an automatic screw workstation commanded by a PLC that supply and mount four screws in a piece.The "AE-PLC-AT" keeps the screws in a vertical storage. The workstation take...

AE-PLC-MEMB

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-MEMB

Stasiun Pembotolan

The Bottling Workstation, "AE-PLC-MEMB", designed by EDIBON, is an automatic rotary table with a vessel feeding system, a controlled water filling system, a cap feeder, a vessel closing system, and finally, an extraction system to a complete...

AE-PLC-MET

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-MET

Stasiun Pelabelan

The The Labelling Process Workstation, "AE-PLC-MET", designed by EDIBON, is an workstation commanded by a PLC. The "AE-PLC-MET" also include a transporting system that carries the incoming bottles to the labelling zone, supplying the bottles one...

AE-PLC-ST

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-ST

Stasiun Pengeboran

The Drilling Workstation, "AE-PLC-ST", designed by EDIBON, is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine...

AE-PLC-SMOLD

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-SMOLD

Stasiun Pembentukan

The Molding Workstation, "AE-PLC-SMOLD", designed by EDIBON, is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a...

AE-PLC-SCOR

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-SCOR

Stasiun Pemotongan

The Cutting Workstation "AE-PLC-SCOR", designed by EDIBON, is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine...

CONTROL PROCESSES WORKSTATION - AE-PLC-CP

AE-PLC-CP

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-CP

Stasiun Kontrol Proses

The Process Control Workstation, "AE-PLC-CP", designed by EDIBON, is a process control workstation commanded by a PLC that coordinates.The "AE-PLC-CP" workstation is designed as a modular system to facilitate the understanding of the unit.The main...