Terlaris

Menampilkan 571 -600 dari 950 produk

COMPUTER CONTROLLED ADVANCED OXIDATION UNIT - POAC

POAC

Available

13.3.- PENGOLAHAN AIR LIMBAH

POAC

Peralatan Oksidasi Lanjutan, Dikendalikan dari Komputer (PC)

The Computer Controlled Advanced Oxidation Unit, "POAC", designed by EDIBON, generates hydroxyl radicals (OH-) through ultraviolet light radiation with hydrogen peroxide.Raw water is enriched with hydrogen peroxide in a transparent tank and is...

Available

7.1.4.- GETARAN DAN OSILASI

MOT

Peralatan Osilasi Torsi

The Torsional Oscillations Unit, "MOT", designed by EDIBON, basically consists of a rigid frame that have some fasteners which enable to situate its different elements. It also has a set of helicoidal springs to simulate long flexible shafts, and...

COMPUTER CONTROLLED REVERSE OSMOSIS/ULTRAFILTRATION UNIT - ROUC

ROUC

Available

11.1.11.- FILTRASI, SEDIMENTASI, DAN PENCAMPURAN

ROUC

Peralatan Osmosis Terbalik/Ultrafiltrasi, Dikendalikan dari Komputer (PC)

The Computer Controlled Reverse Osmosis/Ultrafiltration Unit, "ROUC", designed by EDIBON, performs a tangential flow filtration process, which is a system that prevents the formation of impurities sediments that reduces its capacity.Two variable...

COMPUTER CONTROLLED HUMAN BIOSIGNALS AND PARAMETERS TEACHING UNIT - BIHBPC

BIHBPC

Available

14.3.- PERALATAN BIOMEDIS

BIHBPC

Peralatan Parameter dan Biosinyal dalam Biomedis, Dikendalikan dari Komputer (PC)

The Computer Controlled Biomedical Human Biosignals and Parameters Teaching Unit, "BIHBPC", designed by EDIBON, allows the students to learn how to interpret and perform the most important biosignal measurements: Electrocardiography (ECG), Pulse...

Available

9.2.- PEMANASAN, VENTILASI, AC DAN AIR PANAS

WHT

Peralatan Pelatihan Pemanas Air

The Water Heater Training Unit, "WHT", designed by EDIBON, allows demonstrating the operation of three types of water heaters.The unit has three heaters, two of them commercial one with electronic ignition and one in millivolt, and a residential...

TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT

TEMT

Available

9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TEMT

Peralatan Pelatihan Pengukuran Suhu

The Temperature Measurement Training Unit, "TEMT", designed by EDIBON, allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four...

BACKFLOW PREVENTION TRAINING UNIT - BFPT

BFPT

Available

8.9.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

BFPT

Peralatan Pelatihan Perangkat Anti-Balik

The Backflow Prevention Training Unit, "BFPT", designed by EDIBON, allows verifying the operation of multiple non-return devices.The system contains the most common backflow prevention devices used in the industry. The main objective is to...

TCPT

Available

9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TCPT

Peralatan Pelatihan Pompa Sirkulasi

The Circulating Pumps Training Unit, "TCPT", designed by EDIBON, is an advanced tool designed to facilitate the study and understanding of the operation of circulation pumps in heating systems and sanitary techniques. This unit allows...

MEGE

Available

7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN

MEGE

Peralatan Pelatihan Strain Gauge

The Strain Gauge Training Unit, "MEGE", designed by EDIBON, provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion,...

THBT

Available

9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

THBT

Peralatan Pelatihan untuk Penyeimbangan Hidraulik Radiator

The Hydraulic Radiator Balancing Training Unit, "THBT", designed by EDIBON, allows the study of the amount of water with which to guarantee that all the radiators of an installation are supplied with sufficient hot water.The hydraulic balancing is...

ASSEMBLY AND MAINTENANCE IN REFRIGERATION SYSTEMS UNIT - TAMR

TAMR

Available

9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TAMR

Peralatan Pemasangan dan Pemeliharaan pada Instalasi Refrigerasi

The Assembly and Maintenance in Refrigeration Systems Unit, "TAMR", has been designed by EDIBON to teach the students the planning, implementation and checking of processes related to the assembly, startup and maintenance of refrigeration...

ASSEMBLY AND MAINTENANCE OF A DIAPHRAGM PUMP UNIT - AMDP

Aksesori dari AMP

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

AMDP

Peralatan Pemasangan dan Pemeliharaan Pompa Diafragma

Aksesori dari AMP

Membrane pumps or diaphragm pumps belong to the group of positive displacement pumps, where the pressure increase is obtained by pushing elastic walls, known as, membranes or diaphragms, which change the volume of the chamber. Retention valves,...

ASSEMBLY AND MAINTENANCE OF A GEAR PUMP UNIT - AMGP

Aksesori dari AMP

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

AMGP

Peralatan Pemasangan dan Pemeliharaan Pompa Roda Gigi

Aksesori dari AMP

The gear pumps belong to the group of positive displacement, rotary piston pumps, which produce flow by transporting the fluid betweenthe teeth of two coupled gears. One of them is driven by the shaft of the pump (driving shaft), which turns the...

ASSEMBLY AND MAINTENANCE OF A SCREW PUMP UNIT - AMSP

Aksesori dari AMP

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

AMSP

Peralatan Pemasangan dan Pemeliharaan Pompa Sekrup

Aksesori dari AMP

The screw pumps belong to the group of positive displacement pumps, which use aneccentric helical screw (rotor) that moves inside a sleeve (stator), making the liquid flowbetween the screw and the sleeve. The most important applications of this...

ASSEMBLY AND MAINTENANCE OF A CENTRIFUGAL PUMP UNIT - AMCP

Aksesori dari AMP

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

AMCP

Peralatan Pemasangan dan Pemeliharaan Pompa Sentrifugal

Aksesori dari AMP

The centrifugal pumps belong to the group of rotodynamic pumps, where the fluid is boosted thanks to the acceleration acquired whenpassing through the operating impeller.This acceleration, which starts from the center of the impeller and goes to...

ASSEMBLY AND MAINTENANCE OF AN IN-LINE CENTRIFUGAL PUMP UNIT - AMLCP

Aksesori dari AMP

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

AMLCP

Peralatan Pemasangan dan Pemeliharaan Pompa Sentrifugal Dalam Jalur

Aksesori dari AMP

The centrifugal in-line pumps belong to the rotodynamic pump group, these pumps are the most used currently to pump liquids in general. In-line pumps are installed in straight pipes, and the main difference with a standard pump is that the suction...

ASSEMBLY AND MAINTENANCE OF A PISTON PUMP UNIT - AMPP

Aksesori dari AMP

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

AMPP

Peralatan Pemasangan dan Pemeliharaan Pompa Torak

Aksesori dari AMP

The piston pumps belong to the group of positive displacement pumps, where there are one or several fixed cavities whose volume can be changed due to the effect of a piston. The movement of the fluid is discontinuous and the charge and discharge...

PIPES, VALVES AND FITTINGS ASSEMBLY UNIT - PVFA

PVFA

Available

8.9.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

PVFA

Peralatan Pemasangan Pipa, Katup, dan Aksesori

The Pipes, Valves and Fittings Assembly Unit, "PVFA", designed by EDIBON, consists of a solid and rigid U-shaped frame where a series of real pipes and fittings are mounted to form a complete hydraulic system.A filter, a sight glass and a...

UNIT TO STUDY A SHAFT WITH JOURNAL BEARINGS ASSEMBLY - SJBA

SJBA

Available

7.4.2.- MODEL YANG DAPAT DILEPASKAN

SJBA

Peralatan Pemasangan Poros dengan Bantalan Gelincir

The Unit to Study a Shaft with Journal Bearings Assembly, "SJBA", designed by EDIBON, unit consists of two shaft bearings at the ends and a ground steel shaft. The slide bearing consists of two parts, the bearing itself, which is the part of the...

UNIT TO STUDY GEAR TRAIN ASSEMBLY - MGTA

MGTA

Available

14.1.2.2.- RODA GIGI

MGTA

Peralatan Pemasangan Rangkaian Roda Gigi

The Study Gear Train Assembly Unit, "MGTA", designed by EDIBON, allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the...

Available

7.4.2.- MODEL YANG DAPAT DILEPASKAN

CGA

Peralatan Pemasangan Roda Gigi Kombinasi

A combined gear is a two or more stage gear with different types of gears. Combined gears play an important role in all kinds of industrial machines. Some of the most noteworthy applications are, for example, in elevators, car industry, transport...

Available

7.4.2.- MODEL YANG DAPAT DILEPASKAN

SGA

Peralatan Pemasangan Transmisi dengan Roda Gigi Lurus

The Spur Gear Assembly Unit, "SGA", designed by EDIBON, consists of a spur gear with spiral gearing. The gear consists of a single reduction stage and a fixed transmission ratio. It is a gear unit composed of: driving and driven shafts, drive...

UNIT TO STUDY COMBINED DRIVES ASSEMBLY - MCDA

MCDA

Available

14.1.2.2.- RODA GIGI

MCDA

Peralatan Pemasangan Transmisi Gabungan

The Unit to Study Combined Drives Assembly, "MCDA", designed by EDIBON, allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology.With this unit,...

UNIT TO STUDY SIMPLE DRIVES ASSEMBLY - MSDA

MSDA

Available

14.1.2.2.- RODA GIGI

MSDA

Peralatan Pemasangan Transmisi Sederhana

The Simple Drives Assembly Unit, "MSDA", designed by EDIBON, allows the knowledge and learning of the fundamentals of the mechanical transmission technique, as well as the assembly, disassembly and experimentation with simple gears.The unit allows...

COMPUTER CONTROLLED COMBUSTION LABORATORY UNIT - TVCC

TVCC

Available

9.1.- FUNDAMENTAL DAN KONSEP DASAR TERMODINAMIKA

TVCC

Peralatan Pembakaran Laboratorium, Dikendalikan dari Komputer (PC)

The Computer Controlled Combustion Laboratory Unit, "TVCC", designed by EDIBON, unit is mounted on a metallic frame that enables safe access to the equipment and an easy handling and access to the burner, combustion chamber and all the accessories...

AUTOMOTIVE ELECTRIC GENERATION UNIT - AV-GE

AV-GE

Available

2.5.- ELEKTRONIK OTOMOTIF

AV-GE

Peralatan Pembangkitan Listrik pada Otomotif

The Automotive Electric Generation Unit, "AV-GE", has been designed by EDIBON to provides a practical solution to help to become familiar with the components used in today’s automobile electrical circuits.The components included in "AV-GE" focus...

HVAB

Available

8.7.2.- PENGGEMAR

HVAB

Peralatan Pembelajaran Kipas Axial

The Axial Fan Teaching Unit, "HVAB", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a variable speed centrifugal fan, which is measured through a speed sensor, and a...

COMPUTER CONTROLLED AXIAL FAN TEACHING UNIT - HVAC

HVAC

Available

8.7.2.- PENGGEMAR

HVAC

Peralatan Pembelajaran Kipas Axial, Dikendalikan dari Komputer (PC)

The Computer Controlled Axial Fan Teaching Unit, "HVAC", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a computer controlled speed centrifugal fan, which is measured...

HVCB

Available

8.7.2.- PENGGEMAR

HVCB

Peralatan Pembelajaran Kipas Sentrifugal

The Centrifugal Fan Teaching Unit, "HVCB", allows the students to study the operation characteristics of a centrifugal fan. For that purpose, the unit carries out the measurements of flow, speed, temperature and humidity. Multiple tests related to...

COMPUTER CONTROLLED CENTRIFUGAL FAN TEACHING UNIT - HVCC

HVCC

Available

8.7.2.- PENGGEMAR

HVCC

Peralatan Pembelajaran Kipas Sentrifugal, Dikendalikan dari Komputer (PC)

The Computer Controlled Centrifugal Fan Teaching Unit, "HVCC", allows the students to study the operation characteristics of a centrifugal fan. For that purpose, the unit carries out the measurements of flow, speed, temperature, pressure and...

UNTUK INFORMASI LEBIH LANJUT, HUBUNGI KAMI