Electrical protection systems play an important role within power systems. Nowadays it is unthinkable a national grid without advanced and coordinated protection relays. Protection relays are essential to protect electrical and electronic devices,...

The Faults Simulation Application in Electrical Motors, "AEL-ESAM", has been designed by EDIBON to simulate non-destructive faults in three-phase motors and application of diagnostic and localization techniques.This application allows simulating...

The Photovoltaic Systems Application in Isolated and Parallel Grids, ''AEL-PHIP'', has been designed to study the operations carried out in photovoltaic power systems which operate isolated from the national energy grid (island operation) or...

The Stand-Alone Photovoltaic Application, "AEL-SAPV", has been designed by EDIBON to study the energy production obtained with photovoltaic panels.This application will provide the user with the knowledge and the essential skills about the...

The Alternator Study Application, "AEL-EEA", has been designed by EDIBON to study the behavior of three-phase synchronous generators with independent excitation.This application consists of a motor-generator group and a series of modules that...

The Distribution Transfomer with Motor Regulation Application, "AEL-TI-02", has been designed to study the distribution transformers and its importance in voltage regulation of the medium and low voltage stage of the electrical system. For that,...

The Single-Phase Transformer Application, "AEL-SPTT", has been designed by EDIBON to allow the students learn how to carry out different single-phase transformer tests and how they work.With this application the user will be able to learn...

The Three-Phase Transformer Application, "AEL-TPTT", has been designed by EDIBON to allow the students learn how to carry out different three-phase transformer tests and how they work.With this application the user will study the basic operating...

Power Transmission Application with Synchronous Generator, "AEL-TI-07", has been designed to study power generation systems based onsynchronous generators. This application is designed to demonstrate the most important operations and maneuvers...

The Stand-Alone Wind Turbine Aplication, "AEL-SWT", has been designed by Edibon for the training at both the theoretical and practicallevels in the field of wind turbines.The "AEL-SWT" application provides several levels of training to give the...

The Applications for Process Control, "APC", designed by EDIBON, allows the student to design, assemble and configure various control systems, apart from studying the fundamentals of the control engineering on which they are based.These...

The different sets for the assembly and maintenance of pumps have all the parts in a case for an easy transport, facilitating the clearidentification of all the components and allowing the systematic assembly and disassembly, maintenance and...

The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...

The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...

The Axial Fan Teaching Unit, "HVAB", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a variable speed centrifugal fan, which is measured through a speed sensor, and a...

The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...

The Hydrostatics Bench and Fluid Properties, "BHI", is a compact, mobile and independent unit.There is a water storage tank, to work in a closed system, at the bottom of the bench. The water is distributed by hand pumps from this tank to two upper...

The Computer Controlled Test Bench for Single-Cylinder and Two-Cylinders Engines, 11 kW, "TBMC12", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 11 kW.The element of the unit that offers load torque is an eddy...

The Computer Controlled Test Bench for Single-Cylinder Engines, 2.2 kW, "TBMC3", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 2.2 kW.The unit has an element to exert the braking torque, an asynchronous motor...

The Computer Controlled Test Bench for Single-Cylinder Engines, 7.5 kW, "TBMC8", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 7.5 kW.The element of the unit that offers load torque is an eddy current...

The Computer Controlled Test Bench for Four Cylinders Engines, 75 kW, "TBMC75", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 75 kW.The element of the unit that offers load torque is an eddy current...

This unit is common for Heat Exchangers type "TI" and can work with one or several exchangers.This unit performs the following tasks:Heating water in a computer controlled thermostatic bath.Pumping the hot water.Regulation and measurement of the...

A combinational circuit is an electronic circuit in which the value of its outputs at a given instant, depends on the value of the inputs at the same instant. In other words, it is a circuit that has no memory. Combinational circuits work with...

The Integrated Basic Mechanics Laboratory, "LIMEBA," designed by EDIBON, allows for the construction of various experiments on the base panel, where length measurements are possible thanks to the distance between the centers of the perforations...

Logic gates and the circuits created with them constitute combinational logic, so called because the output only depends on the combination of the input variables present.There is a second group of logic circuits called sequential logic, so called...

The Basic Unit of Mechanical Drive Systems, "MDSU", consists of a main frame where a series of accessories and elements are arranged, distributed in modules of different level, thought to introduce the user in the field of mechanical systems and...

The purpose of this application is to demonstrate the importance of energy storage in isolated environments. There are cases in which due to the absence of wind or photovoltaic energy we have no other option than to resort to the storage of...

Didactic case for the study of foundry fundamentals.Introduction to sand casting: student experiments with three different patterns (bell, anvil and anchor).Operations of ramming up of the moulding sand, melting of the metal, pouring, forming and...

The Belt Friction Unit, "MCF", allows us to carry out studies and investigations to compare the driving torque for a given degree of overlap of a flat belt (leather or rope) and a V belt.With this unit the relationship between the tensions in the...

The Belt Friction Unit with Dynamometers, "MCF/A", allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.With this unit it is possible to observe the relationship between...

The Bench Top Cooling Tower, "TTEB", includes a pump that impels hot water from the tank (with level switch and heating element) to the manifolds located at the top of the cooling tower. Water flow can be adjusted by a manual needle valve.A...