14.- TEKNIK BIOMEDIS

Teknik Biomedis mempelajari penerapan ilmu teknik dalam bidang biologi dan kedokteran. Kombinasi dari kontrol elektronik dan sistem instrumentasi serta penerapan algoritma matematika dan prinsip fisika dan kimia memungkinkan Teknik Biomedis untuk menyelidiki dan mengembangkan teknik dan perangkat baru untuk memecahkan masalah klinis. Disiplin ini berkisar dari desain elemen diagnostik dan alat perangkat lunak medis hingga analisis fisiologis untuk mempelajari jantung atau sistem saraf.

Lihat Lebih Banyak

Teknik Biomedis telah berkembang selama bertahun-tahun seiring dengan kemajuan ilmu pengetahuan dan teknologi. Saat ini, perangkat seperti sistem pemantauan tanda vital atau perangkat diagnostik memfasilitasi tugas perawatan kesehatan. Perkembangan metode analisis citra seperti sinar-X, ultrasound dan magnetic resonance imaging memungkinkan tubuh dipelajari dengan jelas dan cepat. Selain itu, perangkat lunak telemedicine dan manajemen rumah sakit digunakan.

Masa depan Teknik Biomedis memiliki jalur perkembangan yang panjang, karena masyarakat saat ini membutuhkan solusi medis yang cepat dan efisien. Perangkat elektronik yang digunakan setiap hari akan memungkinkan pemantauan pasien jarak jauh, mengikuti nilai tanda vital untuk dapat menganalisis gejala sebelum masalah kesehatan dan bahkan mencegah kemungkinan masalah. Tren lain dalam Teknik Biomedis adalah penyederhanaan alat laboratorium. Sistem seperti Lab On a Chip (LOC) akan mengintegrasikan fungsi laboratorium pada satu chip. Teknik bedah robotik baru, bahan organik baru untuk pembuatan jaringan buatan dan jaringan regeneratif, atau pencetakan 3D organ buatan akan memungkinkan untuk memenuhi kebutuhan medis di masa depan.

Lihat Produk
Materi Terkait
TEKNIK BIOMEDIS SUBCATEGORIES

14.1.- BIOMEKANIKA

Biomekanik mempelajari mekanisme pergerakan makhluk hidup, di antaranya gerakan tubuh manusia. Penelitian ini berkisar dari gerakan yang paling sederhana dalam kehidupan sehari-hari, seperti Kerja atau olah raga, hingga pergerakan beberapa organ dalam, seperti jantung. Untuk mempelajari kinetika...
lihat

14.2.- ELEKTRONIK BIOMEDIS

Teknik Biomedis mempelajari penerapan pengetahuan teknik dalam bidang biologi dan kedokteran. Salah satu bidang yang paling relevan dari teknik ini adalah Elektronik Biomedis, di dalamnya konsep elektronik diterapkan untuk pengembangan instrumentasi medis.Banyak proses yang berkembang dalam dunia...
lihat

14.3.- PERALATAN BIOMEDIS

Peralatan Biomedis adalah seperangkat instrumen yang digunakan dalam bidang kedokteran , biologi dan farmakologi . Rancangan peralatan biomedis berkaitan langsung dengan Instrumentasi Biomedis , dimana instrumen dirancang untuk memperoleh informasi, menerapkan perlakuan atau melakukan...
lihat
TEKNIK BIOMEDIS UNITS
Menampilkan 91 -120 dari 181 produk
PHOTOELASTICITY UNIT - EFO
  • EFO
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN
EFO
Unit Fotoelastisitas
Unit for photoelasticity practices, illustrating the subjects of the Photoelasticity theory, the Elasticity theory, Strength of Materials, and Structure theory.It is very suitable for the introduction and study of photoelasticity: optical...
COMPUTER CONTROLLED PHOTOELASTICITY UNIT WITH ARTIFICIAL VISION SYSTEM - EFOV
  • EFOV
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN
EFOV
Unit Fotoelastisitas dengan Sistem Visi Buatan
Unit for photoelasticity practices, illustrating the subjects of the photoelasticity theory, the elasticity theory, strength of materials, and structure theory.It is very suitable for the introduction and study of photoelasticity: optical...
UNIT FOR DETERMINING THE GAUGE FACTOR OF STRAIN GAUGES - MFGE
  • MFGE
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN
MFGE
Unit for determining the Gauge Factor of Strain Gauges
The Unit for Determining the Gauge Factor of Strain Gauges, "MFGE", allows to determine the k factor of strain gauges.The bar rests on two supports with ball bearings, so that it is possible to work with a load under pure bending.To perform such...
STRAIN GAUGE TRAINING UNIT - MEGE
  • MEGE
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN
MEGE
Strain Gauge Training Unit
The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...
PHOTOELASTIC STRESS DEMONSTRATION UNIT - PSD
  • PSD
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN
PSD
Photoelastic Stress Demonstration Unit
The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- UJI MEKANIK
EEU/20KN
Unit Tes Material Universal
The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...
BRINELL HARDNESS TESTING UNIT - EEDB
  • EEDB
Available
7.3.2.1.- UJI MEKANIK
EEDB
Unit Tes Brinell Hardness
The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...
BRINELL, VICKERS & ROCKWELL HARDNESS TESTING UNIT - EBVR
  • EBVR
Available
7.3.2.1.- UJI MEKANIK
EBVR
Unit Tes Brinell, Vickers dan Rockwell Hardness
The Brinell, Vickers and Rockwell Hardness Testing Unit, "EBVR", consists of a hardness testing machine that determines the three main types of hardness (Brinell, Vickers and Rockwell). It can be adapted to determine hardness of ferrous materials...
CREEP TESTING UNIT - EEFCR
  • EEFCR
Available
7.3.2.1.- UJI MEKANIK
EEFCR
Unit Tes Creep
The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...
COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC
  • EEFC
Available
7.3.2.1.- UJI MEKANIK
EEFC
Unit Komputer Kontrol Tes Kelelahan
The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...
FATIGUE TESTING UNIT - EEF
  • EEF
Available
7.3.2.1.- UJI MEKANIK
EEF
Unit Tes Kelelahan
The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...
CHARPY AND IZOD IMPACT TESTING UNIT - EEICI
  • EEICI
Available
7.3.2.1.- UJI MEKANIK
EEICI
Unit Tes Impact "Charpy dan Izod"
The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- UJI MEKANIK
MEBM
Euler Buckling Modes Unit
With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- UJI MEKANIK
MTP
Unit Putar dan Tekuk
The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- UJI MEKANIK
MTB
Unit Torsi
The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- UJI MEKANIK
MTT
Torsion Test Unit (30Nm)
To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- UJI MEKANIK
MTTU
Tensile Tester Unit
With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...
COMPUTER CONTROLLED NOISE CONTROL DEMONSTRATION UNIT - TDRC
  • TDRC
Available
7.3.2.2.- UJI TERMAL DAN AKUSTIK
TDRC
Computer Controlled Noise Control Demonstration Unit
The Computer Controlled Noise Control Demonstration Unit, "TDRC", has been specifically designed to obtain visual and quantitative results related to noise and vibration control.The main parts of the unit are two noise sources consisting of a...
DIRECT CURRENT (DC) CIRCUITS MODULE - N-M1
  • N-M1
Available
14.2.1.1.- KONSEP HUKUM LISTRIK DASAR
N-M1
Direct Current (DC) Circuits Module
For the correct understanding of electronics it is necessary to know some fundamental laws and theorems such as Ohm’s Law, Kirchhoff’s Laws and other simple theorems of initiation to D.C. circuits.With Direct Current (D.C.) Circuits Module,...
ALTERNATING CURRENT (AC) CIRCUITS MODULE - N-M2
  • N-M2
Available
14.2.1.1.- KONSEP HUKUM LISTRIK DASAR
N-M2
Alternating Current (AC) Circuits Module
In contrast to DC, which always has the same direction and sense, in AC the flow of electrons changes direction periodically with a frequency of 50 or 60 Hz (depending on the country).With Alternating Current (AC) Circuits Module, "N-M2", designed...
ELECTRIC NETWORKS MODULE - N-M16
  • N-M16
Available
14.2.1.1.- KONSEP HUKUM LISTRIK DASAR
N-M16
Electric Networks Module
After studying the basic knowledge of electrical networks, we must understand and investigate the dependence between current and voltage applied to different electrical devices.With the Electric Networks Module, "N-M16", designed by EDIBON, it is...
ELECTROMAGNETISM MODULE - N-M17
  • N-M17
Available
14.2.1.1.- KONSEP HUKUM LISTRIK DASAR
N-M17
Electromagnetism Module
Electromagnetism is the interaction between electric charges. It is described in terms of charges interacting between of electric and magnetic fields.With the Electromagnetism Module, "N-M17", designed by EDIBON, the operation of electromagnetic...
THREE-PHASE CIRCUITS MODULE - N-M18
  • N-M18
Available
14.2.1.1.- KONSEP HUKUM LISTRIK DASAR
N-M18
Three-phase Circuits Module
Three-phase voltage is essentially a system of three alternating voltages, coupled (all 3 are produced simultaneously in a generator) and 120º out of phase with each other (i.e. one third of the period).The Three-phase Circuits Module, "N-M18",...
OSCILLATORS MODULE - N-M6
  • N-M6
Available
14.2.1.2.- ELEKTRONIK ANALOG
N-M6
Oscillators Module
Oscillators operation is usually very similar in all of them: the oscillating circuit produces an oscillation, then the amplifier increases it and finally the feedback network takes a part of the energy from the oscillating circuit and introduces...
OPERATIONAL AMPLIFIERS MODULE - N-M7
  • N-M7
Available
14.2.1.2.- ELEKTRONIK ANALOG
N-M7
Operational Amplifiers Module
Operational amplifiers are compact, active, linear and high-gain devices designed to provide the desired transfer function. An operational amplifier consists of an electronic circuit having two inputs and one output. The output is the difference...
FILTERS MODULE - N-M8
  • N-M8
Available
14.2.1.2.- ELEKTRONIK ANALOG
N-M8
Filters Module
An electronic filter is an element that allows electrical signals to pass through it, at a specific frequency or frequency ranges while preventing the passage of others, being able to modify both, their amplitude and phase. It is a device that...
ANALOG/DIGITAL CONVERTERS MODULE - N-M60
  • N-M60
Available
2.3.3.- ELEKTRONIK DIGITAL
N-M60
Analog/Digital Converters Module
Most of the "information" generated in the world by various physical phenomena has a strong analogical character. This means that the information undergoes a continuous variation within certain limits determined over time. Of course, there is also...
Meminta informasi