14.- TEKNIK BIOMEDIS

Teknik Biomedis mempelajari penerapan ilmu teknik dalam bidang biologi dan kedokteran. Kombinasi dari kontrol elektronik dan sistem instrumentasi serta penerapan algoritma matematika dan prinsip fisika dan kimia memungkinkan Teknik Biomedis untuk menyelidiki dan mengembangkan teknik dan perangkat baru untuk memecahkan masalah klinis. Disiplin ini berkisar dari desain elemen diagnostik dan alat perangkat lunak medis hingga analisis fisiologis untuk mempelajari jantung atau sistem saraf.

Lihat Lebih Banyak

Teknik Biomedis telah berkembang selama bertahun-tahun seiring dengan kemajuan ilmu pengetahuan dan teknologi. Saat ini, perangkat seperti sistem pemantauan tanda vital atau perangkat diagnostik memfasilitasi tugas perawatan kesehatan. Perkembangan metode analisis citra seperti sinar-X, ultrasound dan magnetic resonance imaging memungkinkan tubuh dipelajari dengan jelas dan cepat. Selain itu, perangkat lunak telemedicine dan manajemen rumah sakit digunakan.

Masa depan Teknik Biomedis memiliki jalur perkembangan yang panjang, karena masyarakat saat ini membutuhkan solusi medis yang cepat dan efisien. Perangkat elektronik yang digunakan setiap hari akan memungkinkan pemantauan pasien jarak jauh, mengikuti nilai tanda vital untuk dapat menganalisis gejala sebelum masalah kesehatan dan bahkan mencegah kemungkinan masalah. Tren lain dalam Teknik Biomedis adalah penyederhanaan alat laboratorium. Sistem seperti Lab On a Chip (LOC) akan mengintegrasikan fungsi laboratorium pada satu chip. Teknik bedah robotik baru, bahan organik baru untuk pembuatan jaringan buatan dan jaringan regeneratif, atau pencetakan 3D organ buatan akan memungkinkan untuk memenuhi kebutuhan medis di masa depan.

Lihat Produk
Materi Terkait
TEKNIK BIOMEDIS SUBCATEGORIES

14.1.- BIOMEKANIKA

Biomekanik mempelajari mekanisme pergerakan makhluk hidup, di antaranya gerakan tubuh manusia. Penelitian ini berkisar dari gerakan yang paling sederhana dalam kehidupan sehari-hari, seperti Kerja atau olah raga, hingga pergerakan beberapa organ dalam, seperti jantung. Untuk mempelajari kinetika...
lihat

14.2.- ELEKTRONIK BIOMEDIS

Teknik Biomedis mempelajari penerapan pengetahuan teknik dalam bidang biologi dan kedokteran. Salah satu bidang yang paling relevan dari teknik ini adalah Elektronik Biomedis, di dalamnya konsep elektronik diterapkan untuk pengembangan instrumentasi medis.Banyak proses yang berkembang dalam dunia...
lihat

14.3.- PERALATAN BIOMEDIS

Peralatan Biomedis adalah seperangkat instrumen yang digunakan dalam bidang kedokteran , biologi dan farmakologi . Rancangan peralatan biomedis berkaitan langsung dengan Instrumentasi Biomedis , dimana instrumen dirancang untuk memperoleh informasi, menerapkan perlakuan atau melakukan...
lihat
TEKNIK BIOMEDIS UNITS
Menampilkan 73 -96 dari 181 produk
THREE-HINGED ARCH UNIT - MART
  • MART
Available
7.1.6.- MEKANIKA STRUKTURAL
MART
Three-Hinged Arch Unit
The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...
UNIT FOR STUDYING FORCES IN A SIMPLE BAR STRUCTURE - MFBS
  • MFBS
Available
7.1.6.- MEKANIKA STRUKTURAL
MFBS
Unit for studying Forces in a Simple Bar Structure
The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...
UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1
  • MFCS1
Available
7.1.6.- MEKANIKA STRUKTURAL
MFCS1
Unit for studying Forces in Different Single Plane Trusses
The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the experimental bar forces...
UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2
  • MFCS2
Available
7.1.6.- MEKANIKA STRUKTURAL
MFCS2
Unit for studying Forces in an Overdeterminate Truss
The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in the single plane...
UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3
  • MFCS3
Available
7.1.6.- MEKANIKA STRUKTURAL
MFCS3
Unit for studying Deformation of Trusses
The Unit for studying Deformation of Trusses, "MFCS3", allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the experimental forces in the...
TWO HINGED ARCH UNIT - MFL
  • MFL
Available
7.1.6.- MEKANIKA STRUKTURAL
MFL
Unit Dua Pinned Arch
The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...
PORTAL FRAME UNIT - MPO
  • MPO
Available
7.1.6.- MEKANIKA STRUKTURAL
MPO
Unit Portal Bingkai
The Portal Frame Unit, "MPO", allows to perform vertical deflection and horizontal deflection measurements in a fixed rectangular portal frames.To carry out the deflection tests, a series of loads with different weight must be applied to the...
STRESS HYPOTHESES UNIT - STH
  • STH
Available
7.1.6.- MEKANIKA STRUKTURAL
STH
Stress Hypotheses Unit
The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...
SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE
  • MEPE
Available
7.1.6.- MEKANIKA STRUKTURAL
MEPE
Simple Stability Problems Study Unit
The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...
UNIT FOR STUDYING METHODS TO DETERMINE THE ELASTIC LINE - MDLE
  • MDLE
Available
7.1.6.- MEKANIKA STRUKTURAL
MDLE
Unit for studying Methods to Determine the Elastic Line
The Unit for studying Methods to Determine the Elastic Line, "MDLE", consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys, dial gauges and a set...
UNIT TO STUDY STRESS ON A MEMBRANE - SSM
  • SSM
Available
7.1.6.- MEKANIKA STRUKTURAL
SSM
Unit to Study Stress on a Membrane
The Unit to Study Stress on a Membrane, "SSM", designed by EDIBON, allows the study of stresses and deformations in a thin disc or membrane subjected to different compressive stresses.The main element of the equipment is a thin disc or membrane...
UNSYMMETRICAL CANTILEVER UNIT - MVV
  • MVV
Available
7.1.6.- MEKANIKA STRUKTURAL
MVV
Unit Cantilever Unsimetris
The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- UJI MEKANIK
MDB
Unit Kelendutan Batang Melengkung
The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- UJI MEKANIK
MFV
Unit Beam Deflection
The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- UJI MEKANIK
MFLT
Unit Strut
The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- UJI MEKANIK
MUP
Universal Buckling Unit
The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF
  • MMF
Available
7.3.2.1.- UJI MEKANIK
MMF
Unit Pembagian Kekuatan dan Momen Tekuk
The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...
PHOTOELASTICITY UNIT - EFO
  • EFO
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN
EFO
Unit Fotoelastisitas
Unit for photoelasticity practices, illustrating the subjects of the Photoelasticity theory, the Elasticity theory, Strength of Materials, and Structure theory.It is very suitable for the introduction and study of photoelasticity: optical...
COMPUTER CONTROLLED PHOTOELASTICITY UNIT WITH ARTIFICIAL VISION SYSTEM - EFOV
  • EFOV
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN
EFOV
Unit Fotoelastisitas dengan Sistem Visi Buatan
Unit for photoelasticity practices, illustrating the subjects of the photoelasticity theory, the elasticity theory, strength of materials, and structure theory.It is very suitable for the introduction and study of photoelasticity: optical...
UNIT FOR DETERMINING THE GAUGE FACTOR OF STRAIN GAUGES - MFGE
  • MFGE
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN
MFGE
Unit for determining the Gauge Factor of Strain Gauges
The Unit for Determining the Gauge Factor of Strain Gauges, "MFGE", allows to determine the k factor of strain gauges.The bar rests on two supports with ball bearings, so that it is possible to work with a load under pure bending.To perform such...
STRAIN GAUGE TRAINING UNIT - MEGE
  • MEGE
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN
MEGE
Strain Gauge Training Unit
The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...
PHOTOELASTIC STRESS DEMONSTRATION UNIT - PSD
  • PSD
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN
PSD
Photoelastic Stress Demonstration Unit
The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- UJI MEKANIK
EEU/20KN
Unit Tes Material Universal
The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...
Meminta informasi