Лидеры продаж

Показано 121-144 из 941

COMPREHENSIVE TESTING AND DIAGNOSIS BENCH FOR HYBRID ENGINE WITH BRAKING AND DIAGNOSTIC SOFTWARE - TBM/H

TBM/H

Available

9.9.- ДВИГАТЕЛИ ВНУТРЕННЕГО СГОРАНИЯ

TBM/H

Испытательный и диагностический стенд для гибридного двигателя с ПО для торможения и диагностики

The Comprehensive Testing and Diagnosis Unit for Hybrid Engine with Braking and Diagnostic Software, "TBM/H", designed by EDIBON, is an advanced unit that enables an in-depth analysis of hybrid engine performance, providing a key solution for...

COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER AND TWO-CYLINDERS ENGINES, 11 KW - TBMC12

TBMC12

Available

7.2.3.- ДВИГАТЕЛИ

TBMC12

Испытательный Стенд для Двигателей 11 кВт, Управляемый компьютером (ПК)

The Computer Controlled Test Bench for Single-Cylinder and Two-Cylinders Engines, 11 kW, "TBMC12", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 11 kW.The element of the unit that offers load torque is an eddy...

COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER ENGINES, 2.2 KW - TBMC3

TBMC3

Available

7.2.3.- ДВИГАТЕЛИ

TBMC3

Испытательный Стенд для Двигателей 2,2 кВт, Управляемый компьютером (ПК)

The Computer Controlled Test Bench for Single-Cylinder Engines, 2.2 kW, "TBMC3", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 2.2 kW.The unit has an element to exert the braking torque, an asynchronous motor...

COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER ENGINES, 7.5 KW - TBMC8

TBMC8

Available

7.2.3.- ДВИГАТЕЛИ

TBMC8

Испытательный Стенд для Двигателей 7,5 кВт, Управляемый компьютером (ПК)

The Computer Controlled Test Bench for Single-Cylinder Engines, 7.5 kW, "TBMC8", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 7.5 kW.The element of the unit that offers load torque is an eddy current...

COMPUTER CONTROLLED TEST BENCH FOR FOUR-CYLINDERS ENGINES, 75 KW - TBMC75

TBMC75

Available

7.2.3.- ДВИГАТЕЛИ

TBMC75

Испытательный стенд с компьютерным управлением для 75 кВт

The Computer Controlled Test Bench for Four Cylinders Engines, 75 kW, "TBMC75", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 75 kW.The element of the unit that offers load torque is an eddy current...

Аксессуар LICOMBA

Available

2.1.- ЭНЕРГОСНАБЖЕНИЕ, ИЗМЕРИТЕЛЬНОЕ ОБОРУДОВАНИЕ И АКСЕССУАРЫ

FACO

Источник питания

Аксессуар LICOMBA

Using this power supply, training and practices can be done conventionally. This is the most common power supply used with our modules.

FME10

Available

8.1.2.- ИЗМЕРЕНИЕ

FME10

Калибратор веса конструкции

The Pressure Gauge Calibrator, "FME10", designed by EDIBON, allows the study of the operation of a Bourdon type pressure gauge using a standard set of calibrated weights and the determination and the study of the pressure gauge hysteresis...

FME37

Available

8.1.2.- ИЗМЕРЕНИЕ

FME37

Калибратор Расходомеров

The Flowmeter Calibrator, "FME37", designed by EDIBON, allows for the assessment of the accuracy and performance of the most commonly used flow meters. It features a panel of four-tube pressure gauges displaying pressure differences at various...

COMPUTER CONTROLLED EXHAUST GAS CALORIMETER - TBMC-CG

TBMC-CG

Available

7.2.3.- ДВИГАТЕЛИ

TBMC-CG

Калориметр выхлопных газов, управляемый компьютером (ПК)

The Computer Controlled Exhaust Gas Calorimeter, "TBMC-CG", is mounted on a laminated aluminium profiles frame and panels in painted steel.The main element consists on a double-wall tank made in stainless steel. Through the tank interior the...

TBCF

Available

9.1.- ОСНОВЫ И БАЗОВЫЕ ПРИНЦИПЫ ТЕРМОДИНАМИКИ

TBCF

Калориметрический насос

Bomb Calorimeter, "TBCF", comprises the calorimeter, a calorimeter vessel, an outer double walled water jacket, control unit to switch on/off the stirrer and the ignition device, an accurate thermometer and charging unit with pressure gauges to...

FME25

Available

8.1.5.- ВИЗУАЛИЗАЦИЯ ПОТОКА

FME25

Канал для жидкости, Длина: 1 м

The Flow Channel, length: 1 m, "FME25", designed by EDIBON, allows to studying the behaviour of water flowing through a one-meter channel.It basically consists of a channel of rectangular cross section with transparent walls, through which water...

Available

8.5.- ГИДРАВЛИЧЕСКИЕ КАНАЛЫ

CFG

Каналы жидкости

Channel made up of group of modular parts of 2.5 m long. Each rectangular piece of different sections with transparent walls of 10 mm thick is made in such a way that guarantees a uniform section along the entire channel. All the sections are made...

FLOW CHANNELS (SECTION: 80 X 300 MM) - CF

Available

8.5.- ГИДРАВЛИЧЕСКИЕ КАНАЛЫ

Каналы жидкости (раздел: 80X300 мм)

Channel, through which water flows, of rectangular section with transparent walls that enable to observe all the experiments. Water is taken from the storage tank by means of a hydraulic pump and, by the pipe, it is driven to the inlet tank, where...

COMPUTER CONTROLLED FLOW CHANNELS (SECTION: 80 X 300 MM) - CFC

Available

8.5.- ГИДРАВЛИЧЕСКИЕ КАНАЛЫ

CFC

Каналы жидкости (раздел: 80X300 мм), Управляемые с компьютера (ПК)

Channel, through which water flows, of rectangular section with transparent walls that enable to observe all the experiments. Water is taken from the storage tank by means of a hydraulic pump, with speed regulation, and, by the pipe, it is driven...

COMPUTER CONTROLLED FLOW CHANNELS - CFGC

CFGC

Available

8.5.- ГИДРАВЛИЧЕСКИЕ КАНАЛЫ

CFGC

Каналы жидкости, Управляемые с компьютера (ПК)

The Computer Controlled Flow Channels, "CFGC", are hydrodynamic channels to perform multiple hydraulic tests. They consist of a rectangular section channel with tempered glass transparent walls through which water flows. Water is impelled by a...

QRCB

Available

11.2.- ХИМИЧЕСКИЕ РЕАКТОРЫ

QRCB

Каталитические реакторы с неподвижным слоем для гидролиза сахарозы

Sucrose hydrolysis is a reversible reaction widely used at the industrial level to produce glucose and fructose. This process benefits greatly from catalysis, both chemical and enzymatic, and is a representative example of using fixed-bed reactors...

COMPUTER CONTROLLED CATALYTIC REACTORS - QRCC

QRCC

Available

11.2.- ХИМИЧЕСКИЕ РЕАКТОРЫ

QRCC

Каталитические реакторы с фиксированным слоем для гидролиза сахарозы, управляемые с ПК

FME16

Available

8.1.7.- ГИДРАВЛИЧЕСКИЕ МАШИНЫ: ТУРБИНЫ

FME16

Ковшовая гидротурбина

The Pelton Turbine unit, "FME16", designed by EDIBON, allows the study of the characteristics of the tangential wheels or pressure turbines commonly used to produce electricity in hydroelectric plants to exploit large hydraulic jumps of low...

SHELL & TUBE HEAT EXCHANGER FOR TICC - TICT

Аксессуар TICC

Available

9.7.- ТЕПЛООБМЕННИКИ

TICT

Кожухотрубный теплообменник для TICC

Аксессуар TICC

The Shell and Tube Heat Exchanger for TICC, "TICT", designed by EDIBON, provides a comprehensive environment for the study of heat transfer. It allows analysis of the overall energy balance, heat losses in parallel and counterflow configurations,...

COMPUTER CONTROLLED FOCUSING SOLAR ENERGY COLLECTOR - ECESC

ECESC

Available

5.3.2.- ТЕПЛОВАЯ СОЛНЕЧНАЯ ЭНЕРГИЯ

ECESC

Коллектор солнечной энергии, управляемый с компьютера (ПК)

The Computer Controlled Focusing Solar Energy Collector, "ECESC", shows the principles of a parabolic trough to collect solar energy.The unit includes a highly polished stainless steel parabolic reflector on a mobile base. It can be horizontally...

COMPUTER CONTROLLED WETTED WALL GAS ABSORPTION COLUMN - CAPC

CAPC

Available

11.1.8.- ПОГЛОЩЕНИЕ И АДСОРБЦИЯ

CAPC

Колонна абсорбции газа со смачиваемыми стенками, управляемая с ПК

The studied absorption process corresponds to the oxygen-deoxygenated water system, where the oxygen comes from the air and the deoxygenated air is obtained through a desorption column, where a water current comes into contact with a nitrogen...

COMPUTER CONTROLLED GAS ABSORPTION COLUMN - CAGC

CAGC

Available

11.1.8.- ПОГЛОЩЕНИЕ И АДСОРБЦИЯ

CAGC

Колонна абсорбции газа, управляемая с ПК

The Computer Controlled Gas Absorption Column, "CAGC", is a scale unit designed to study hydrodynamic and absorption processes in packed columns. This system absorbs ammonia or CO2 from a mixture with air in a watery solution that flowing down the...

Available

11.1.8.- ПОГЛОЩЕНИЕ И АДСОРБЦИЯ

CAG

Колонна абсорбции газов

The Gas Absorption Column, "CAG", is a scale unit designed to study hydrodynamic and absorption processes in packed columns. This system absorbs ammonia or CO2 from a mixture with air in a watery solution that descends along the column.The main...

COMPUTER CONTROLLED CRACKING COLUMN - QCCC

QCCC

Available

11.1.4.- ПЕРЕГОНКА И КРЕКИНГ

QCCC

Колонна крекинга, управляемая с компьютера (ПК)

The Computer Controlled Cracking Column, "QCCC", has been designed by EDIBON to cracking and distilling oil is a complete lab tool that allows to the students to carry out a cracking reaction, and the study and the control of different variables...

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ