Лидеры продаж

Показано 145-180 из 941

COMBINED FREE AND FORCED CONVECTION AND RADIATION MODULE FOR TSTCC - TXC/CC

Аксессуар TSTCC

Available

9.6.- ТЕПЛОПЕРЕДАЧА

TXC/CC

Комбинированное оборудование для свободной и вынужденной конвекции и излучения для

Аксессуар TSTCC

The Combined Free and Forced Convection and Radiation Unit for TSTCC, "TXC/CC," allows the study of the principles of convection (both free and forced) combined with radiation from a heated horizontal cylinder. It investigates the variation of the...

BASIC ELECTRONICS AND ELECTRICITY ASSEMBLY KITS: - M-KITS

M-KITS

Available

2.2.- НАБОР КОМПОНЕНТОВ ДЛЯ СХЕМ ЦЕПЕЙ

M-KITS

Комплекты для сборки электроники и электрики:

The purpose of Electronics and Electricity Assembly Kits (M-KITS) is to provide the students with the necessary elements for creating their own circuits.

COMPUTER CONTROLLED CONTACT PLATE FREEZER - TPCC

TPCC

Available

12.1.- ТЕХНОЛОГИИ ПРОИЗВОДСТВА ПРОДУКТОВ ПИТАНИЯ

TPCC

Контактный плиточный скороморозильный аппарат, управляемый с ПК

The Computer Controlled Contact Plate Freezer, "TPCC", designed by EDIBON, allow the student to freeze food products quickly by using an industrial freezing process.The unit includes a compression refrigeration circuit. It is based on mechanically...

COMPUTER CONTROLLED AIRLIFT REACTOR - QRALC

QRALC

Available

11.2.- ХИМИЧЕСКИЕ РЕАКТОРЫ

QRALC

Контролируемое ПК устройство для изучения Биореактора

The Computer Controlled Airlift Reactor, "QRALC", designed by EDIBON, is an aerobic submerged reactor designed to determine the characteristic variables of the airlift reactor. It is made of transparent material so that the internal recirculation...

N-EM-CR

Available

6.2.2.1.- ПРОИЗВОДСТВЕННЫЕ СИСТЕМЫ

N-EM-CR

Контроль реактора

The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...

Аксессуар TSTCC

Available

9.6.- ТЕПЛОПЕРЕДАЧА

TSTCC/CIB

Контрольный интерфейсный блок для TSTCC (общий для всех модулей типа "TXC")

Аксессуар TSTCC

CONCENTRIC TUBE HEAT EXCHANGER FOR TICB - TITCB

Аксессуар TICB

Available

9.7.- ТЕПЛООБМЕННИКИ

TITCB

Концентрический трубчатый теплообменник для TICB

Аксессуар TICB

The Concentric Tube Heat Exchanger for TICB, "TITCB", designed by EDIBON, allows for the study of heat transfer between two fluids: the hot water flowing through the inner tube and the cold water flowing through the annular zone between the inner...

SHELL & TUBE HEAT EXCHANGER FOR TICB - TICTB

Аксессуар TICB

Available

9.7.- ТЕПЛООБМЕННИКИ

TICTB

Корпус и трубчатый теплообменник для TICB

Аксессуар TICB

The Shell and Tube Heat Exchanger for TICB, "TICTB", designed by EDIBON, provides a comprehensive environment for the study of heat transfer. It allows analysis of the overall energy balance, heat losses in parallel and counterflow configurations,...

Available

7.1.2.1.- МЕХАНИЗМЫ

MBD

Кривошипно-шатунный механизм

The Slider Crank Mechanism, "MBD", designed by EDIBON, is an example of slider-crank mechanism.This mechanism is made of aluminum and consists of a rotary element (graduated disc), called crank, connected to a rigid bar, calledconnecting rod. When...

HVLS

Available

5.6.2.- СИСТЕМЫ ЗАЩИТЫ

HVLS

Лаборатория высоковольтных систем

The High Voltage Laboratory System "HVLS" is formed by a base unit and three optional test kits some optional made with highest precision to build different configurations in order to carry out high AC Voltage Tests, DC Voltage Tests and Impulse...

LICOMBA

Available

3.1.- ЭНЕРГОСНАБЖЕНИЕ, ИЗМЕРИТЕЛЬНОЕ ОБОРУДОВАНИЕ И АКСЕССУАРЫ

LICOMBA

Лаборатория связи

The LICOMBA provides the students a complete equipment to study the basic and advanced concepts about analog and digital communication.With this unit the students can learn the main communication concepts, analog and digital modulations and...

BASIC ELECTRONICS AND ELECTRICITY LABORATORY: - LIEBA

LIEBA

Available

14.2.1.6.- СИЛОВАЯ ЭЛЕКТРОНИКА

LIEBA

Лаборатория электроники и основ электричества

We present a flexible and modular-based system for learning basic electronics, basic electricity and circuit theory. The advantage given by this learning and teaching system is that the student establishes his own rhythm, thus rendering...

LABORATORY SCALE PRESSURE SWING ADSORPTION UNIT - LPSA

LPSA

Available

11.1.8.- ПОГЛОЩЕНИЕ И АДСОРБЦИЯ

LPSA

Лабораторное оборудование для адсорбции под изменяющимся давлением

The Laboratory Scale Pressure Swing Adsorption Unit, "LPSA", is a laboratory scale plant that allows the performance of adsorption tests using the pressure swing technique.The LPSA unit allows to synthesize a mixture of gases coming from four...

COMPUTER CONTROLLED COMBUSTION LABORATORY UNIT - TVCC

TVCC

Available

9.1.- ОСНОВЫ И БАЗОВЫЕ ПРИНЦИПЫ ТЕРМОДИНАМИКИ

TVCC

Лабораторное оборудование для горения, управляемое компьютером (ПК)

The Computer Controlled Combustion Laboratory Unit, "TVCC", designed by EDIBON, unit is mounted on a metallic frame that enables safe access to the equipment and an easy handling and access to the burner, combustion chamber and all the accessories...

TAAB

Available

9.2.- ОТОПЛЕНИЕ, ВЕНТИЛЯЦИЯ, КОНДИЦИОНИРОВАНИЕ ВОЗДУХА И ГОРЯЧАЯ ВОДА

TAAB

Лабораторное оборудование для кондиционирования воздуха

The Air Conditioning Laboratory Unit, "TAAB", has been designed by EDIBON to study the change of the air conditions and the refrigeration circuit.The unit consists of a testing tunnel made in stainless steel, in which there have installed two...

COMPUTER CONTROLLED AIR CONDITIONING LABORATORY UNIT - TAAC

TAAC

Available

9.2.- ОТОПЛЕНИЕ, ВЕНТИЛЯЦИЯ, КОНДИЦИОНИРОВАНИЕ ВОЗДУХА И ГОРЯЧАЯ ВОДА

TAAC

Лабораторное оборудование для кондиционирования воздуха, управляемое компьютером (ПК)

The Computer Controlled Air Conditioning Laboratory Unit, "TAAC", has been designed by EDIBON to study the change of the air conditions and the refrigeration circuit. The unit consists of a testing tunnel made of stainless steel, in which there...

Available

14.2.1.5.- ИНСТРУМЕНТАРИЙ И КОНТРОЛЬ

M45

Линейное перемещение и мощность

Linear Variable Displacement Transducers (LVDT) provide a certain amount of voltage output relative to the parameters being measured, for example force, for signal conditioning.With Linear Position and Force Unit, "M45", designed by EDIBON, it is...

BLIO

Available

11.1.7.- СУШКА И ОХЛАЖДЕНИЕ

BLIO

Лиофилизатор

The Freeze-Dryer, "BLIO", is able to carry out the freeze-drying process for the drying of different products inside a transparent chamber that allows the control of the pressure, and on heatable trays that allow to control the temperature of the...

MANOMETERS & MULTIMANOMETERS (SEVERAL TYPES): - HMM

Available

8.2.- ИЗМЕРЕНИЕ

HMM

Манометры и мультиманометры (несколько видов):

Thanks to the "Manometer and Multimanometer, "HMM" collection designed by EDIBON, a comprehensive and versatile solution is provided with a wide variety of manometers tailored to specific pressure measurement needs. This collection ensures safe...

MBM2

Available

7.1.2.1.- МЕХАНИЗМЫ

MBM2

Механизм быстрого возвращения Bитворта

The Whitworth Quick Return Mechanism, "MBM2", is a mechanism able to transform circular movement into reciprocating movement. It ismade of aluminum and consists of a rotary element, called crank, with a graduated disk, connected to a rigid bar,...

Available

7.1.2.1.- МЕХАНИЗМЫ

MUN

Механизм соединения Хука

The Hooke’s Joint Mechanism, "MUN", designed by EDIBON, represents a universal coupling, also called a U-joint, Hooke joint or cardan joint. The Hooke joint is a universal mechanism that is often used to transmit rotary motion between two...

Available

7.1.2.1.- МЕХАНИЗМЫ

MAC

Механизм сцепления

The Coupling Mechanism, "MAC", represents a simple Oldham type coupling. The lateral displacement of the input and output shafts may be varied and circular scales are fitted to the input and output flanges.It consists of two outer discs made of...

Available

7.1.2.1.- МЕХАНИЗМЫ

MYE

Механизм треугольный кривошип

The Scotch Yoke Mechanism, "MYE", designed by EDIBON, is an example of slider-crank mechanism for converting the linear motion of a slider into rotational motion or vice versa.It is made of aluminum and consists of a rotary element, called crank,...

Available

7.1.2.1.- МЕХАНИЗМЫ

MBI

Механизм шатуна

The Crank Mechanism "MBI", is a unit designed to observe, study and record the motion of a crank and the forces involved in a simple engine mechanism. The piston is linearly displaced through a cylinder with the aid of a guide.Bearings are coupled...

COMPUTER CONTROLLED MULTIPUMP TESTING BENCH (4 TYPES OF PUMPS) - PBOC

PBOC

Available

8.7.1.- НАСОСЫ

PBOC

Многофункциональная испытательная установка (4 типа насосов), управляемая с компьютера (ПК)

The Computer Controlled Multipump Testing Bench (4 types of pumps), "PBOC", designed by EDIBON, allows the students to study the operating characteristics of several types of pumps. This unit allows to control and to measure the most...

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ