Лидеры продаж

Показано 901-930 из 934

TCPT

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TCPT

Учебное оборудование для циркуляционных насосов

The Circulating Pumps Training Unit, "TCPT", designed by EDIBON, is an advanced tool designed to facilitate the study and understanding of the operation of circulation pumps in heating systems and sanitary techniques. This unit allows...

COMPUTER CONTROLLED TEACHING AUTONOMOUS PASTEURIZATION UNIT - PADC

PADC

Available

12.2.- ОБРАБОТКА МОЛОЧНЫХ ПРОДУКТОВ

PADC

Учебный автономный пастеризатор, управляемый с компьютером (ПК)

The Computer Controlled Teaching Autonomous Pasteurization Unit, "PADC", designed by EDIBON, receives cold milk from a refrigeration tank (not included). The milk is impelled with a milk pump (computer controlled). It is heated in the heat...

COMPUTER CONTROLLED TEACHING YOGURT INCUBATOR - IYDC

IYDC

Available

12.2.- ОБРАБОТКА МОЛОЧНЫХ ПРОДУКТОВ

IYDC

Учебный инкубатор для йогурта, управляемый с компьютера (ПК)

The Computer Controlled Teaching Yogurt Incubator, "IYDC", is called yogurt maker or yogurt heater. This yogurt maker consists of an insulated central body where yogurt fermentation is carried out.There is a series of shelves inside to place the...

COMPUTER CONTROLLED TEACHING CURDLING TANK - CCDC

CCDC

Available

12.2.- ОБРАБОТКА МОЛОЧНЫХ ПРОДУКТОВ

CCDC

Учебный Коагуляционный Бак, Управляемый компьютером (ПК)

The Computer Controlled Teaching Curdling Tank, "CCDC", designed by EDIBON, is employed to curdle milk, which is an essential process to make cheese.The unit has tank, water jacket, coil with one inlet and outlet for the water of the boiler, inlet...

COMPUTER CONTROLLED THREE DIMENSIONS (3D) PHYSICS - EFAC

EFAC

Available

1.1.- ТРЁХМЕРНАЯ ФИЗИКА

EFAC

Физика в трех измерениях (3D), управляемая с компьютера (ПК)

The Computer Controlled Three Dimensional (3D) Physics, "EFAC", from EDIBON, allows to do practical exercises in the different fields of physics (electricity, magnetic fields, mechanics, acoustics, optics and thermodynamics).The "EFAC" is an open...

COMPUTER CONTROLLED DRUM CELL FILTER - PFTC

PFTC

Available

11.1.11.- ФИЛЬТРАЦИЯ, СЕДИМЕНТАЦИЯ И СМЕШИВАНИЕ

PFTC

Фильтр громкости звонка, управляемый с ПК

The Computer Controlled Drum Cell Filter, "PFTC", designed by EDIBON, allows for the study of the filtration of liquids with suspended solids and the observation of the operation of a filter drum, enabling its use to investigate the filtration of...

COMPUTER CONTROLLED PLATE AND FRAME FILTER PRESS - AFPMC

AFPMC

Available

11.1.11.- ФИЛЬТРАЦИЯ, СЕДИМЕНТАЦИЯ И СМЕШИВАНИЕ

AFPMC

Фильтр-пресс с пластинами и рамами, управляемый с компьютера (ПК)

The Computer Controlled Plate and Frame Filter Press, "AFPMC", has been designed to study the filtration and clarification processes using a filter press in which the number of frames and the type of filter cloths can change.A suspension is...

PHOTOVOLTAIC ENERGY POWER PLANT - PWP-PE

Аксессуар AEL-MGP

Available

5.2.- МИКРОСЕТИ

PWP-PE

Фотоэлектрическая электростанция

Аксессуар AEL-MGP

The Photovoltaic Energy Power Plant, PWP-PE, designed by EDIBON, allows for the study of photovoltaic power plants within the context of microgrids.It consists of a three-phase inverter fed with a photovoltaic panel array simulator. The user will...

CENTRIFUGAL PUMP CHARACTERISTICS - FME13

FME13

Available

8.1.6.- ГИДРАВЛИЧЕСКИЕ МАШИНЫ: НАСОСЫ

FME13

Характеристика центробежных насосов

The Centrifugal Pump Characteristics, "FME13", designed by EDIBON, allows the study of several centrifugal pump characteristics such as efficiency, series/parallel couplings, etc.The unit has a centrifugal pump with similar characteristics to the...

Available

11.2.- ХИМИЧЕСКИЕ РЕАКТОРЫ

Химические реакторы

The Chemical Reactors, "QR", has been designed by EDIBON for the study and comparison of different types of chemical reactors in an easy and simple way and thus allowing, on a small scale, to carry out the necessary studies and practices to...

COMPUTER CONTROLLED CHEMICAL REACTORS - QRC

Available

11.2.- ХИМИЧЕСКИЕ РЕАКТОРЫ

QRC

Химические реакторы, управляемые компьютером (ПК)

The Computer Controlled Chemical Reactors, "QRC", has been designed by EDIBON for the study and comparison of different types of chemical reactors in an easy and simple way and thus allowing, on a small scale, to carry out the necessary studies...

Available

7.1.2.1.- МЕХАНИЗМЫ

MCA

Четырёхзвенный механизм

The Four-Bar Mechanism, "MCA", designed by EDIBON, is a bench-top unit to perform laboratory experiments.It is made of anodized aluminum and consists of two rotary elements (graduated discs) mounted on ball bearings. The discs include a scale to...

COMPUTER CONTROLLED EXPERIMENTAL IMPULSE TURBINE - HTIC

HTIC

Available

5.3.6.- ГИДРАВЛИЧЕСКАЯ ЭНЕРГИЯ

HTIC

Экспериментальная активная гидротурбина, управление с ПК

The Computer Controlled Experimental Impulse Turbine, "HTIC", has been designed by EDIBON to study the characteristics and the behavior of a small scale impulse turbine.This unit includes suitable instrumentation to measure the main...

COMPUTER CONTROLLED EXPERIMENTAL REACTION TURBINE - HTRC

HTRC

Available

5.3.6.- ГИДРАВЛИЧЕСКАЯ ЭНЕРГИЯ

HTRC

Экспериментальная реактивная гидротурбина, управление с ПК

The Experimental Reaction Turbine, Computer Controlled (PC), "HTRC", allows to study the characteristics of operation of a small scale reaction turbine.This unit includes suitable instrumentation to measure the main parameters:There is a pressure...

Аксессуар LIMEBA

Available

7.1.1.- ОСНОВНЫЕ НАБОРЫ ДЛЯ МЕХАНИКИ

MECA4

Экспериментальное оборудование для изучения динамики

Аксессуар LIMEBA

Dynamics is the part of Mechanics that analyzes the motion of an element or mechanism caused by a force. Thus the study is concentrated on the basic laws of Dynamics.

LOAD ELEVATION MECHANISMS EXPERIMENTS - MECA2

Аксессуар LIMEBA

Available

7.1.1.- ОСНОВНЫЕ НАБОРЫ ДЛЯ МЕХАНИКИ

MECA2

Экспериментальное оборудование для изучения подъёмных механизмов

Аксессуар LIMEBA

Experimentation with the most important load lifting mechanisms.Study of the work and performance of different mechanisms.

Аксессуар LIMEBA

Available

7.1.1.- ОСНОВНЫЕ НАБОРЫ ДЛЯ МЕХАНИКИ

MECA6

Экспериментальное оборудование для изучения спецтехники

Аксессуар LIMEBA

This module considers various mechanisms frequently used in industrial processes, without them some operations would not be possible with the same efficiency. Here these mechanisms are shown and their function analyzed.

Аксессуар LIMEBA

Available

7.1.1.- ОСНОВНЫЕ НАБОРЫ ДЛЯ МЕХАНИКИ

MECA3

Экспериментальное оборудование для изучения трансмиссий

Аксессуар LIMEBA

Most recent machines require the transmission of motion between elements to obtain the desired mechanical result. The mechanisms studied in this module are those that transmit motion between two axles.

Аксессуар LIMEBA

Available

7.1.1.- ОСНОВНЫЕ НАБОРЫ ДЛЯ МЕХАНИКИ

MECA5

Экспериментальное оборудование для изучения трения

Аксессуар LIMEBA

This module considers the most important phenomenon of Dynamics: Friction. It is a manifestation of the energy loss due to contact, effect that happens in every real-world mechanism.

Аксессуар LIMEBA

Available

7.1.1.- ОСНОВНЫЕ НАБОРЫ ДЛЯ МЕХАНИКИ

MECA1

Эксперименты по статике

Аксессуар LIMEBA

Statics is the part of Mechanics that studies any kind of structure or element in balance-equilibrium.Basically the module consist on experiments in which the student shall learn to deduce the main principles of Statics and its most important...

Available

7.1.2.1.- МЕХАНИЗМЫ

MEX

Эксцентриковый механизм

The Cam and Follower Mechanism, "MEX", designed by EDIBON, allows to study the cam-follower and eccentric-follower mechanisms. For that purpose, several plate cam models in different forms, one eccentric and several roller-shaped, flat-shaped...

EDILAB-ELEC1

Available

5.3.9.- ВОДОРОДНЫЕ ТОПЛИВНЫЕ ЭЛЕМЕНТЫ

EDILAB-ELEC1

Электролизер (3 Nл/ч)

The Electrolyzer (3 Nl/h), "EDILAB-ELEC1", consists of an electrolyzer to generate hydrogen which uses a high performance and efficiency system based on water electrolysis. Hydrogen to be used safely is obtained from it. The electrolysis cell is a...

EDILAB-ELEC2

Available

5.3.9.- ВОДОРОДНЫЕ ТОПЛИВНЫЕ ЭЛЕМЕНТЫ

EDILAB-ELEC2

Электролизер (60 Nл/ч)

The Electrolyzer (60 Nl/h), "EDILAB-ELEC2", designed by EDIBON, can separate hydrogen and oxygen from water by applying electricity.The "EDILAB-ELEC2", consists of an electrolyzer to generate hydrogen which uses a high performance and efficiency...

CUTAWAY DC PERMANENT MAGNET MOTOR - EMT15-S

EMT15-S

Available

4.4.1.- РАЗРЕЗНЫЕ МОДЕЛИ

EMT15-S

Электромагнитный двигатель постоянного тока в разрезе

It includes a Cut away DC permanent magnet motor (EMT15-S) in order to study the different parts of this motor type.

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ