Лидеры продаж

Показано 871-900 из 916

AE-PLC-APS

Available

6.2.5.1.- РАБОЧЕЕ МЕСТО ДЛЯ ЗАГРУЗКИ ФРАГМЕНТОВ ПРИЛОЖЕНИЙ

AE-PLC-APS

Учебная станция питания деталей

The Pieces Feeder Workstation, "AE-PLC-APS", is a unit that works with pneumatics and electro-pneumatics technologies.The function of the "AE-PLC-APS" is to supply pieces and to verify them, if they are acceptable.The pieces will be supplied one...

AE-PLC-MEMB

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-MEMB

Учебная станция розлива

The "AE-PLC-MEMB" is a bottling workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-MEMB" transport the input bottles, to the filling area. In this zone, the "AE-PLC-MEMB" fills...

AE-BR

Available

6.2.5.5.- РАБОЧЕЕ МЕСТО ДЛЯ РОБОТИЗИРОВАННЫХ ПРИЛОЖЕНИЙ

AE-BR

Учебная станция с роботизированной рукой

The "AE-BR" is a robotic arm workstation with the programming console included. The robotic arm can command the pneumatic gripper or the electrical driller installed in it.The "AE-BR" workstation is able to perform a lot of functions including:...

AE-PLC-M

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-M

Учебная станция сборки

The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...

AE-PLC-ST

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-ST

Учебная станция сверления

The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...

INDUSTRIAL PROCESSES CONTROL WORKSTATION - AE-PLC-CPI

AE-PLC-CPI

Available

6.2.4.- ПРОМЫШЛЕННОЕ ПРИМЕНЕНИЕ С ПЛК

AE-PLC-CPI

Учебная станция управления промышленными процессами

The "AE-PLC-CPI" application is a unit that includes different technologies to carry out four control loops in closed loop: flow, level, temperature and pressure. A flexible system of ball valves and pipe connections makes the configuration of the...

Available

9.2.- ОТОПЛЕНИЕ, ВЕНТИЛЯЦИЯ, КОНДИЦИОНИРОВАНИЕ ВОЗДУХА И ГОРЯЧАЯ ВОДА

WHT

Учебное оборудование для водонагревателей

The Water Heater Training Unit, "WHT", allows demonstrating the operation of three types of water heaters. The unit has three heaters, two of them commercial one with electronic ignition and one in millivolt, and a residential gas heater without...

THBT

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

THBT

Учебное оборудование для гидравлической балансировки радиаторов

The Hydraulic Radiator Balancing Training Unit, "THBT", allows the study of the amount of water with which to guarantee that all the radiators of an installation are supplied with sufficient hot water.The hydraulic balancing is carried out by...

TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT

TEMT

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TEMT

Учебное оборудование для измерения температуры

The Temperature Measurement Training Unit, "TEMT", allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four different measuring...

MEGE

Available

7.3.1.- ФОТОУПРУГОСТЬ И ТЕНЗОМЕТРИЯ

MEGE

Учебное оборудование для изучения тензодатчиков

The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...

COMPUTER CONTROLLED HOT WATER PRODUCTION AND HEATING TEACHING UNIT - EACC

EACC

Available

9.2.- ОТОПЛЕНИЕ, ВЕНТИЛЯЦИЯ, КОНДИЦИОНИРОВАНИЕ ВОЗДУХА И ГОРЯЧАЯ ВОДА

EACC

Учебное оборудование для производства горячей воды и отопления, управляемое компьютером (ПК)

The main element of the Computer Controlled Hot Water Production and Heating Teaching Unit, "EACC", is the boiler. Its function is the heating of the water that will flow through the other elements transferring its heat. It is a low temperature...

COMPUTER CONTROLLED BUTTER MAKER TEACHING UNIT - EMANC

EMANC

Available

12.2.- ОБРАБОТКА МОЛОЧНЫХ ПРОДУКТОВ

EMANC

Учебное оборудование для производства масла, управляемое компьютером (ПК)

The Computer Controlled Butter Maker Teaching Unit, "EMANC", has been designed to provide practical training in the manufacture of butter.The main structure is a stainless steel tank with a capacity of 25 l. At the top, a cover made of stainless...

COMPUTER CONTROLLED SOLIDS PACKAGING TEACHING UNIT - EDSC

EDSC

Available

12.1.- ТЕХНОЛОГИИ ПРОИЗВОДСТВА ПРОДУКТОВ ПИТАНИЯ

EDSC

Учебное оборудование для упаковки твердых веществ, управляемое компьютером (ПК)

TCPT

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TCPT

Учебное оборудование для циркуляционных насосов

The Circulating Pumps Training Unit, "TCPT", designed by EDIBON, is an advanced tool designed to facilitate the study and understanding of the operation of circulation pumps in heating systems and sanitary techniques. This unit allows...

COMPUTER CONTROLLED TEACHING AUTONOMOUS PASTEURIZATION UNIT - PADC

PADC

Available

12.2.- ОБРАБОТКА МОЛОЧНЫХ ПРОДУКТОВ

PADC

Учебный автономный пастеризатор, управляемый с компьютером (ПК)

The Computer Controlled Teaching Autonomous Pasteurization Unit "PADC" receives cold milk from a refrigeration tank (not included). The milk is impelled with a milk pump (computer controlled). It is heated in the heat exchanger, by counter-current...

COMPUTER CONTROLLED TEACHING YOGURT INCUBATOR - IYDC

IYDC

Available

12.2.- ОБРАБОТКА МОЛОЧНЫХ ПРОДУКТОВ

IYDC

Учебный инкубатор для йогурта, управляемый с компьютера (ПК)

The Computer Controlled Teaching Yogurt Incubator, "IYDC", is called yogurt maker or yogurt heater. This yogurt maker consists of an insulated central body where yogurt fermentation is carried out.There is a series of shelves inside to place the...

COMPUTER CONTROLLED TEACHING CURDLING TANK - CCDC

CCDC

Available

12.2.- ОБРАБОТКА МОЛОЧНЫХ ПРОДУКТОВ

CCDC

Учебный Коагуляционный Бак, Управляемый компьютером (ПК)

The Computer Controlled Teaching Curdling Tank, "CCDC", is employed to curdle milk, which is an essential process to make cheese.The unit has tank, water jacket, coil with one inlet and outlet for the water of the boiler, inlet for the water of...

COMPUTER CONTROLLED THREE DIMENSIONS (3D) PHYSICS - EFAC

EFAC

Available

1.1.- ТРЁХМЕРНАЯ ФИЗИКА

EFAC

Физика в трех измерениях (3D), управляемая с компьютера (ПК)

The Computer Controlled Three Dimensional (3D) Physics, "EFAC", from EDIBON, allows to do practical exercises in the different fields of physics (electricity, magnetic fields, mechanics, acoustics, optics and thermodynamics). The "EFAC" is an...

COMPUTER CONTROLLED PLATE AND FRAME FILTER PRESS - AFPMC

AFPMC

Available

11.1.11.- ФИЛЬТРАЦИЯ, СЕДИМЕНТАЦИЯ И СМЕШИВАНИЕ

AFPMC

Фильтр-пресс с пластинами и рамами, управляемый с компьютера (ПК)

The Computer Controlled Plate and Frame Filter Press, "AFPMC", has been designed to study the filtration and clarification processes using a filter press in which the number of frames and the type of filter cloths can change.A suspension is...

PHOTOVOLTAIC ENERGY POWER PLANT - PWP-PE

Аксессуар AEL-MGP, AEL-MGP

Available

5.2.- МИКРОСЕТИ

PWP-PE

Фотоэлектрическая электростанция

Аксессуар AEL-MGP, AEL-MGP

The purpose of this application is the study of photovoltaic power plants in the context of microgrids. It consists of a three-phase inverter fed with a photovoltaic panel array simulator. The user will be able to set the generation parameters and...

CENTRIFUGAL PUMP CHARACTERISTICS - FME13

FME13

Available

8.1.6.- ГИДРАВЛИЧЕСКИЕ МАШИНЫ: НАСОСЫ

FME13

Характеристика центробежных насосов

The Centrifugal Pump Characteristics, "FME13", designed by EDIBON, allows the study of several centrifugal pump characteristics such as efficiency, series/parallel couplings, etc.The unit has a centrifugal pump with similar characteristics to the...

Available

11.2.- ХИМИЧЕСКИЕ РЕАКТОРЫ

Химические реакторы

The Chemical Reactors, "QR", has been designed by EDIBON for the study and comparison of different types of chemical reactors in an easy and simple way and thus allowing, on a small scale, to carry out the necessary studies and practices to...

COMPUTER CONTROLLED CHEMICAL REACTORS - QRC

Available

11.2.- ХИМИЧЕСКИЕ РЕАКТОРЫ

QRC

Химические реакторы, управляемые компьютером (ПК)

The Computer Controlled Chemical Reactors, "QRC", has been designed by EDIBON for the study and comparison of different types of chemical reactors in an easy and simple way and thus allowing, on a small scale, to carry out the necessary studies...

Available

7.1.2.1.- МЕХАНИЗМЫ

MCA

Четырёхзвенный механизм

The Four-Bar Mechanism, "MCA", designed by EDIBON, is a bench-top unit to perform laboratory experiments.It is made of anodized aluminum and consists of two rotary elements (graduated discs) mounted on ball bearings. The discs include a scale to...

COMPUTER CONTROLLED EXPERIMENTAL IMPULSE TURBINE - HTIC

HTIC

Available

5.3.6.- ГИДРАВЛИЧЕСКАЯ ЭНЕРГИЯ

HTIC

Экспериментальная активная гидротурбина, управление с ПК

The Computer Controlled Experimental Impulse Turbine, "HTIC", has been designed by EDIBON to study the characteristics and the behavior of a small scale impulse turbine.This unit includes suitable instrumentation to measure the main...

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ