Лидеры продаж

Показано 571-600 из 921

MTSF

Available

14.1.2.2.- ПРИВОДЫ

MTSF

Оборудование для червячной передачи

The Worm and Wheel Unit, "MTSF", designed by EDIBON, allows to demonstrate the principle of a worm gear.The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel.The worm and wheel are...

IGHT

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

IGHT

Оборудование для экспериментов с мгновенным газовым обогревателем

The Instantaneous Gas Heater Trainer, ,IGHT,, designed by EDIBON, is a training unit with wheels to facilitate its mobility that represents a gas heater training system. The unit operates with air, simulating the operation of the heater, so it can...

MEASUREMENT AND REGULATION STATION TRAINER - MRST

MRST

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MRST

Оборудование для экспериментов с станцией регулировки и измерения

The Measurement and Regulation Station Trainer,"MRST", designed by EDIBON is a totally accessible bench-top unit.The unit works with an air compressor that simulates the gas flowing inside the pipes (air testing), allowing to check the tightness...

COMPUTER CONTROLLED BATCH SOLVENT EXTRACTION AND DESOLVENTISING UNIT - QEDC

QEDC

Available

11.1.5.- ЭКСТРАКЦИЯ

QEDC

Оборудование для экстракции растворителя и десорбции, управляемое компьютером (ПК)

The Computer Controlled Batch Solvent Extraction and Desolventising Unit, "QEDC", is a batch process unit able to perform different solid/liquid extractions. It is especially suitable for extracting oil from oily seeds and to remove the solvent...

UNIT FOR STUDY OF ELECTROSURGERY IN BIOMEDICINE - BICIR

BICIR

Available

14.3.- БИОМЕДИЦИНСКОЕ ОБОРУДОВАНИЕ

BICIR

Оборудование для электрокирургии в биомедицине

The Unit for Study of Electrosurgery in Biomedicine, "BICIR", consists of an electrosurgical unit used in modern medicine to cut tissues, restrict blood flow and improve the surgeon’s visibility during interventions. The unit includes a protective...

AUTOMOTIVE ELECTRONIC CONTROL DEVICE UNIT - AV-ECD

AV-ECD

Available

2.5.- АВТОМОБИЛЬНАЯ ЭЛЕКТРОНИКА

AV-ECD

Оборудование для электронных устройств управления в автомобилестроении

The Automotive Electronic Control Device Unit, "AV-ECD", provides a practical solution to the introduction of electronic control units or ECUs.The Automotive Electronic Control Device Unit, "AV-ECD", is composed of an Electronic Control Unit (ECU)...

COMPUTER CONTROLLED BIOMEDICAL ELECTROTHERAPY TEACHING UNIT - BIETC

BIETC

Available

14.3.- БИОМЕДИЦИНСКОЕ ОБОРУДОВАНИЕ

BIETC

Оборудование для электротерапии в биомедицине, управляемое компьютером (ПК)

The Computer Controlled Biomedical Electrotherapy Teaching Unit, "BIETC", consists of an electrotherapy machine used in a professional field , and a control interface box.The control interface box has the connection to the PC to acquire the...

MTE1

Available

7.2.2.- КПП, ДИФФЕРЕНЦИАЛЫ И ТРАНСМИССИЯ

MTE1

Оборудование для эпициклоидной передачи (1 элемент)

The Epicyclic Gear Unit (1 element), "MTE1", includes a set of epicyclic gears that allows the student to study different reduction ratios (direct drive and overdrive), as well as torque conversion.A simple epicyclic gears set consists of:Sun gear...

MTE2

Available

7.2.2.- КПП, ДИФФЕРЕНЦИАЛЫ И ТРАНСМИССИЯ

MTE2

Оборудование для эпициклоидной передачи (2 элемента)

The Epicyclic Gear Unit (2 elements), "MTE2", consists of two coupled epicyclic gears sets. It will allow the students to carry out experiments of different gear ratios, as well as the torque conversions.The epicyclic gears installed in the...

MTE3

Available

7.2.2.- КПП, ДИФФЕРЕНЦИАЛЫ И ТРАНСМИССИЯ

MTE3

Оборудование для эпициклоидной передачи (3 элемента)

The Epicyclic Gear Unit (3 elements), "MTE3", designed by EDIBON, consists of three coupled epicyclic gears sets. It will allow the students to carry out experiments of different gear ratios, as well as the torque conversions.The epicyclic gears...

CMVAS

Available

7.1.4.- ВИБРАЦИИ И КОЛЕБАНИЯ

CMVAS

Оборудование комплексного анализа механических вибраций

The Comprehensive Mechanical Vibration Analysis Unit, "CMVAS", has been designed by EDIBON for an in-depth study of vibrations in mechanical systems, a phenomenon present in most industrial and engineering processes. These vibrations can lead to...

CENTRIFUGAL PUMP CUTAWAY MODEL UNIT - CPCM

CPCM

Available

8.9.1.- РАЗРЕЗНЫЕ МОДЕЛИ

CPCM

Оборудование модели сечения центробежного насоса

The Centrifugal Pump Cutaway Model Unit, "CPCM", designed by EDIBON, allows the students to visualize the inner parts of a centrifugal pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of...

UDCB

Available

11.1.4.- ПЕРЕГОНКА И КРЕКИНГ

UDCB

Оборудование непрерывной дистилляции

The Continuous Distillation Unit, "UDCB", is formed by a boiler, on which different types of columns can be adapted (plate columns and Raschig columns). An eight plate column, a reflux system, a tank for distillation, a vacuum pump and a feeding...

COMPUTER CONTROLLED CONTINUOUS DISTILLATION UNIT - UDCC

UDCC

Available

11.1.4.- ПЕРЕГОНКА И КРЕКИНГ

UDCC

Оборудование непрерывной дистилляции с компьютерным управлением

The Computer Controlled Continuous Distillation Unit, "UDCC", is basically composed by a boiler on which different types of interchangeable columns can be adapted (plate and filling (Raschig rings)). An eight plate column, a reflux system, a tank...

COMPUTER CONTROLLED ORGANIC RANKINE CYCLE UNIT - TORC

TORC

Available

5.3.10.- ПАРОВЫЕ ТУРБИНЫ И ОРГАНИЧЕСКИЕ ЦИКЛЫ РАНКИНА

TORC

Оборудование органического цикла Рэнкина, управляемое с компьютера (ПК)

The Computer Controlled Organic Rankine Cycle Unit, "TORC", allows the student to study the complete process and the components of an organic Rankine Cycle, as well as the main variables that take part in the process. The working fluid (coolant...

Available

14.1.2.2.- ПРИВОДЫ

MEE

Оборудование подъемного механизма с зубчатыми передачами

The Geared Lifting Unit, "MEE", has been designed to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support the gear...

Available

9.1.- ОСНОВЫ И БАЗОВЫЕ ПРИНЦИПЫ ТЕРМОДИНАМИКИ

TPT

Оборудование распределения давления в соплах

The Nozzle Pressure Distribution Unit, "TPT", allows to investigate the pressure distribution and the mass flow rate in nozzles (convergentdivergent and convergent nozzles).The unit includes three types of nozzles:Convergent type (conical) nozzle,...

COMPUTER CONTROLLED MARCET BOILER UNIT - TECMC

TECMC

Available

9.1.- ОСНОВЫ И БАЗОВЫЕ ПРИНЦИПЫ ТЕРМОДИНАМИКИ

TECMC

Оборудование с котлом Марсета, управляемое компьютером (ПК)

The Computer Controlled Marcet Boiler Unit "TECMC" is an unit designed to demonstrate the relationship between pressure and temperature of the saturated steam for comparison with published results.The unit consists of an insulated stainless steel...

UNIT TO STUDY A VARIABLE SPEED TRAPEZOIDAL BELT DRIVE CUTAWAY MODEL - BDCM

Аксессуар CMTM

Available

7.4.1.- РАЗРЕЗНЫЕ МОДЕЛИ

BDCM

Оборудование сеченной модели клиноременной вариаторной передачи

Аксессуар CMTM

The Unit to Study a Variable Speed Trapezoidal Belt Drive Cutaway Model provides insight into the operation of continuously variable transmissions (CVT), where the speed ratio changes progressively and seamlessly, allowing for automatic torque...

UNIT TO STUDY A MULTIPLE-DISC CLUTCH CUTAWAY MODEL - DCCM

Аксессуар CMTM

Available

7.4.1.- РАЗРЕЗНЫЕ МОДЕЛИ

DCCM

Оборудование сеченной модели многодисковой муфты

Аксессуар CMTM

The Unit to Study a Multiple-Disc Clutch Cutaway Model provides insight into the operation of this clutch system, which uses multiple friction discs to increase torque transmission capacity.This type of clutch is widely used in chain tractor...

UNIT TO STUDY A CONTROL GEAR CUTAWAY MODEL - CGCM

Аксессуар CMTM

Available

7.4.1.- РАЗРЕЗНЫЕ МОДЕЛИ

CGCM

Оборудование сеченной модели регулировочной шестерни

Аксессуар CMTM

The Unit to Study a Control Gear Cutaway Model provides an in-depth analysis of these gears, which are designed to adjust the spacing between teeth, ensuring precise control in various mechanical applications.These gears are essential in precision...

UNIT TO STUDY A TWO-STAGE SPUR GEAR CUTAWAY MODEL - SGCM/2

Аксессуар CMTM

Available

7.4.1.- РАЗРЕЗНЫЕ МОДЕЛИ

SGCM/2

Оборудование сеченой модели двухступенчатой прямозубой передачи

Аксессуар CMTM

The Unit to Study a Two-Stage Spur Gear Cutaway Model provides an in-depth analysis of these systems, which utilize two pairs of spur gears in series to achieve greater speed reduction and more efficient torque transmission.These systems are...

UNIT TO STUDY A MITRE GEAR CUTAWAY MODEL - MGCM

Аксессуар CMTM

Available

7.4.1.- РАЗРЕЗНЫЕ МОДЕЛИ

MGCM

Оборудование сеченой модели конической передачи

Аксессуар CMTM

The Unit to Study a Mitre Gear Cutaway Model provides a detailed study of this transmission system, composed of two conical cogwheels, designed to transmit motion between two intersecting shafts, usually positioned at a right angle.Due to their...

UNIT TO STUDY A SPUR GEAR CUTAWAY MODEL - SGCM

Аксессуар CMTM

Available

7.4.1.- РАЗРЕЗНЫЕ МОДЕЛИ

SGCM

Оборудование сеченой модели передачи с прямозубыми шестернями

Аксессуар CMTM

The Unit to Study a Spur Gear Cutaway Model provides insight into the operation of this transmission system, characterized by teeth parallel to the axis of rotation, allowing for direct power transmission with high efficiency.This type of gear is...

UNIT TO STUDY A PLANETARY GEAR CUTAWAY MODEL - PGCM

Аксессуар CMTM

Available

7.4.1.- РАЗРЕЗНЫЕ МОДЕЛИ

PGCM

Оборудование сеченой модели планетарной передачи

Аксессуар CMTM

The Unit to Study a Planetary Gear Cutaway Model provides an in-depth analysis of this type of transmission, which consists of one or more external (planet) gears rotating around a central (sun) gear.Planetary gears are widely used in vehicle...

UNIT TO STUDY A WORM GEAR CUTAWAY MODEL - WGCM

Аксессуар CMTM

Available

7.4.1.- РАЗРЕЗНЫЕ МОДЕЛИ

WGCM

Оборудование сеченой модели червячной передачи

Аксессуар CMTM

The Unit to Study a Worm Gear Cutaway Model provides insight into the operation of this transmission system, consisting of a helical worm screw and a circular cogwheel.This type of transmission is widely used in automatic doors, elevators, and...

Available

7.1.3.- СТАТИКА И ДИНАМИКА

CGU

Оборудование центробежных регуляторов

The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...

COMPUTER CONTROLLED CHEMICAL REACTORS TRAINING SYSTEM - QRQC

QRQC

Available

11.2.- ХИМИЧЕСКИЕ РЕАКТОРЫ

QRQC

Обучающая система по работе с химическими реакторами, программируемая с ПК

The Computer Controlled Chemical Reactors Training System, "QRQC," has been designed by EDIBON to facilitate advanced study for students, professors and researchers on the attributes, scenarios, and various types of reactors prevalent in the...

BUILDING CONTROL TRAINING APPLICATION VIA BMS - AEL-KNX-BMS

Аксессуар AEL-KNX, AEL-KNX, AEL-KNX

Available

4.2.4.- КОММУНИКАЦИОННАЯ ШИНА / ЕВРОПЕЙСКАЯ ИНСТАЛЛЯЦИОННАЯ ШИНА / АВТОМАТИЗАЦИЯ ЗДАНИЙ

AEL-KNX-BMS

Обучающее Приложение по Управлению Зданиями через BMS

Аксессуар AEL-KNX, AEL-KNX, AEL-KNX

The AEL-KNX- is a device designed to provide knowledge and experience in KNX programming practices specifically tailored for building management systems (BMS). This unit serves as a valuable resource for educational and professional institutions...

COMPUTER CONTROLLED LIQUID PACKAGING TEACHING UNIT - EDLC

EDLC

Available

12.2.- ОБРАБОТКА МОЛОЧНЫХ ПРОДУКТОВ

EDLC

Обучающее устройство для розлива воды в пластиковую тару, управляемое с ПК

The Computer Controlled Liquid Packaging Teaching Unit, "EDLC", unit is a liquid and semi-dense products dosing machine based on dose delivery through a pneumatically-operated cylinder.The product is absorbed by the unit from the tank installed...

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ