Лидеры продаж

Показано 361-396 из 931

COMPUTER CONTROLLED CORROSION STUDY UNIT - EECC

EECC

Available

11.1.9.- ИОНООБМЕН И КОРРОЗИЯ

EECC

Оборудование для изучения коррозии, управляемое компьютером (ПК)

The Computer Controlled Corrosion Study Unit, "EECC", designed by EDIBON, allows the corrosion simultaneous study up to eight corrosion cells.Each sample for the test is put in such away that unwanted secondary effects are eliminated.The cells...

COMPUTER CONTROLLED BIOMEDICAL CIRCULATORY SYSTEM TEACHING UNIT - BICSC

BICSC

Available

14.3.- БИОМЕДИЦИНСКОЕ ОБОРУДОВАНИЕ

BICSC

Оборудование для изучения кровеносной системы в биомедицине, управляемое компьютером (ПК)

The Computer Controlled Biomedical Circulatory System Teaching Unit, "BICSC", designed by EDIBON, allows the students to learn how to interpret the results obtained by the viscometer and pressure sensors, and apply them for the diagnosis of...

COMPUTER CONTROLLED TORSIONAL VIBRATION UNIT - MEVTC

MEVTC

Available

7.1.4.- ВИБРАЦИИ И КОЛЕБАНИЯ

MEVTC

Оборудование для изучения крутильных вибраций, управляемое компьютером (ПК)

The Computer Controlled Torsional Vibration Unit, "MEVTC", has been designed by EDIBON to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with...

Available

7.1.4.- ВИБРАЦИИ И КОЛЕБАНИЯ

MOT

Оборудование для изучения крутильных колебаний

The Torsional Oscillations Unit, "MOT", designed by EDIBON, basically consists of a rigid frame that have some fasteners which enable to situate its different elements. It also has a set of helicoidal springs to simulate long flexible shafts, and...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MTB

Оборудование для изучения кручения

The Torsion Unit, "MTB", has been designed by EDIBON to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a...

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MTP

Оборудование для изучения кручения и изгиба

The Torsion and Bend Unit, "MTP", designed by EDIBON, is a combined unit for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate...

UNIT FOR STUDYING METHODS TO DETERMINE THE ELASTIC LINE - MDLE

MDLE

Available

7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА

MDLE

Оборудование для изучения методов определения упругой линии

The Unit for studying Methods to Determine the Elastic Line, "MDLE", designed by EDIBON, consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys,...

MEBM

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MEBM

Оборудование для изучения модов панелирования Эйлера

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...

Available

7.1.3.- СТАТИКА И ДИНАМИКА

SRI

Оборудование для изучения момента инерции вращения

The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...

COMPUTER CONTROLLED UNIT FOR TRANSIENT DRAINAGE PROCESSES IN STORAGE RESERVOIRS - PDDRC

PDDRC

Available

8.9.3.- МОНТАЖ И НАЛАДКА

PDDRC

Оборудование для изучения нестационарных процессов слива в резервуарах, управляемое компьютером (ПК)

The Computer Controlled Unit for Transient Drainage Processes in Storage Reservoirs, "PDDRC", designed by EDIBON, allows to investigate transient drainage processes in storage reservoirs, to simulate a rainwater retention basin and to study the...

Available

11.1.12.- ОБРАБОТКА ТВЁРДЫХ ТЕЛ

QMS

Оборудование для изучения обращения с твердыми веществами

The Solids Handling Study Unit, "QMS", has been designed by EDIBON to introduce the students in different aspect of solids behaviour, unit operations as size reduction, mixing, transport, discharge, weighing, etc.The unit consists of a bench on...

ESED

Available

11.1.11.- ФИЛЬТРАЦИЯ, СЕДИМЕНТАЦИЯ И СМЕШИВАНИЕ

ESED

Оборудование для изучения осаждения

The Sedimentation Study Unit, "ESED", designed by EDIBON, allows studying and compare the sedimentation processes of several suspensions simultaneously.It is formed by three sedimentation methacrylate cylinders mounted vertically on a panel,...

UNIT FOR THE STUDY OF POROUS BEDS IN VENTURI TUBES (DARCY´S EQUATION) - FME24

FME24

Available

8.1.8.- СИСТЕМА ГИДРАВЛИЧЕСКИХ ТРУБ

FME24

Оборудование для изучения пористых слоев в трубах Вентури (уравнение Дарси)

The Unit for the Study of Porous Beds in Venturi Tubes (Darcy´s Equation), "FME24", designed by EDIBON, for the study of porous beds in Venturi tubes (Darcy's Equation), allowing the complete and detailed understanding of this equation.The unit is...

Available

7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА

MPO

Оборудование для изучения портальной конструкции

The Portal Frame Unit, "MPO", designed by EDIBON, allows for precise measurements of vertical and horizontal deflection in an embedded rectangular portal frame. By applying various loads with specific weights, changes in the portal frame’s...

UNIT TO STUDY THE PRESSURE DROP OF COMPRESSIBLE FLUIDS IN PIPES - PDCFP

PDCFP

Available

8.8.- СИСТЕМА ТРУБОПРОВОДОВ ДЛЯ ЖИДКОСТЕЙ

PDCFP

Оборудование для изучения потери давления в сжимаемых жидкостях в трубопроводах

The Unit to Study the Pressure Drop of Compressible Fluids in Pipes, "PDCFP", allows the study of the compressible fluid pressure drop, for example the air of a compressor, and the different flow conditions (laminar and turbulent) thanks to the...

COMPUTER CONTROLLED UNIT TO STUDY FLOW THROUGH PACKED COLUMNS - FPCC

FPCC

Available

11.1.8.- ПОГЛОЩЕНИЕ И АДСОРБЦИЯ

FPCC

Оборудование для изучения потока в колоннах с наполнителем, управляемое компьютером (ПК)

The Computer Controlled Unit to Study Flow through Packed Columns, "FPCC", designed by EDIBON, unit is a transparent packed column, which can be used with water, air or both fluids, simulating an absorption column.When working with water, the unit...

COMPUTER CONTROLLED TIDAL ENERGY UNIT - EMMC

EMMC

Available

5.3.4.- МОРСКАЯ ЭНЕРГИЯ

EMMC

Оборудование для изучения приливной энергии, управляемое компьютером (ПК)

Tidal energy is another way to generate electricity extracting energy from the sea. Twice a day big volumes of water rise and fall with the tides.A Tidal Barrage make use of the potential energy in the difference in height (or head) between high...

COMPUTER CONTROLLED UNIT TO STUDY WATER FLOW PRINCIPLES - WFPC

WFPC

Available

8.4.- ВИЗУАЛИЗАЦИЯ ПОТОКА

WFPC

Оборудование для изучения принципов потока воды, управляемое компьютером (ПК)

The Computer Controlled Unit to Study Water Flow Principles, "WFPC", is composed by both a closed and an open water circuit, thus allowing the observation of fluid's behavior in each of them. The selection of the circuit can be made by means of a...

SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE

MEPE

Available

7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА

MEPE

Оборудование для изучения проблем устойчивости

The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...

MSHU

Available

7.1.3.- СТАТИКА И ДИНАМИКА

MSHU

Оборудование для изучения простого гармонического движения

This Simple Harmonic Motion Unit, "MSHU", designed by EDIBON, allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a...

PERMEABILITY/FLUIDISATION STUDIES UNIT - PEFP

PEFP

Available

11.1.1.- ФЛЮИДИЗАЦИЯ

PEFP

Оборудование для изучения псевдоожижения и проницаемости

The Permeability/Fluidisation Studies Unit, "PEFP", designed by EDIBON, allows to observe the behaviour of liquid fluidisation in a granular bed.The main element is a permeability meter. It is a transparent cylinder that supports the soil sample...

UNIT FOR STUDYING EQUILIBRIUM OF MOMENTS ON A TWO ARM LEVER - MEMB2

MEMB2

Available

7.1.3.- СТАТИКА И ДИНАМИКА

MEMB2

Оборудование для изучения равновесия моментов на двухплечевом рычаге

The Unit for studying Equilibrium of Moments on a Two Arm Lever, "MEMB2", has been designed by EDIBON to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme...

MPCO

Available

7.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА)

MPCO

Оборудование для изучения распределения давления в подшипниках

The Journal Bearing Unit, "MPCO", designed by EDIBON, allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its...

HECA

Available

8.8.- СИСТЕМА ТРУБОПРОВОДОВ ДЛЯ ЖИДКОСТЕЙ

HECA

Оборудование для изучения расхода воздуха

The Air Flow Studies Unit, "HECA", designed by EDIBON, is a floor standing unit that allows to measure different characteristics of air distribution systems and to demonstrate certain basic principles of fluid mechanics in ducts and jets.The unit...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF REGULATION AND CONTROL - RYC

Аксессуар RYC/T

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC

Оборудование для изучения регулирования и управления, управляемое компьютером (ПК)

Аксессуар RYC/T

Regulation and control theory is divided into two major divisions in, namely, classical and modern. The implementation of classical controller designs as compared to systems designed using modern control theory is easier and these controllers are...

Available

7.2.2.- КПП, ДИФФЕРЕНЦИАЛЫ И ТРАНСМИССИЯ

MEC

Оборудование для изучения сверхпривода

The Overdrive Unit, "MEC", includes a set of epicyclical gears that represent an application of a simple epicyclic arrangement of the type used in a motor vehicle overdrive.Simple epicyclic set consists of:Sun gear that rotates together with the...

Available

7.1.4.- ВИБРАЦИИ И КОЛЕБАНИЯ

MVL

Оборудование для изучения свободных вибраций

The Free Vibration Unit, "MVL", has been designed by EDIBON to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be...

MVLF

Available

7.1.4.- ВИБРАЦИИ И КОЛЕБАНИЯ

MVLF

Оборудование для изучения свободных и вынужденных вибраций

The Free and Forced Vibration Unit, "MVLF", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free and forced vibrations of a simple spring-mass-damper system. Simple...

AMT/P

Available

8.8.- СИСТЕМА ТРУБОПРОВОДОВ ДЛЯ ЖИДКОСТЕЙ

AMT/P

Оборудование для изучения сетки в трубах

The Mesh in Pipe Unit, "AMT/P", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to work autonomously.The valves that...

PIPE NETWORK UNIT, WITH HYDRAULICS BENCH (FME00) - AMT

Available

8.8.- СИСТЕМА ТРУБОПРОВОДОВ ДЛЯ ЖИДКОСТЕЙ

AMT

Оборудование для изучения сетки в трубах с гидравлическим стендом (FME00)

The Pipe Network Unit, with Hydraulics Bench (FME00), "AMT", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to work...

COMPUTER CONTROLLED PIPE NETWORK UNIT, WITH HYDRAULICS BENCH (FME00) - AMTC

AMTC

Available

8.8.- СИСТЕМА ТРУБОПРОВОДОВ ДЛЯ ЖИДКОСТЕЙ

AMTC

Оборудование для изучения сетки в трубах с гидравлическим стендом (FME00), управляемое компьютером (ПК)

The Computer Controlled Pipe Network Unit, with Hydraulics Bench (FME00), "AMTC", consists of a pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required...

PIPE NETWORK UNIT, WITH HYDRAULICS BENCH (FME00/B) - AMT/B

AMT/B

Available

8.8.- СИСТЕМА ТРУБОПРОВОДОВ ДЛЯ ЖИДКОСТЕЙ

AMT/B

Оборудование для изучения сетки в трубах с гидравлической установкой (FME00/B)

The Pipe Network Unit, without Hydraulics Bench (FME00), "AMT/B", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to...

UNIT FOR STUDYING FORCES IN A SIMPLE BAR STRUCTURE - MFBS

MFBS

Available

7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА

MFBS

Оборудование для изучения сил в простой ферменной конструкции (простые фермы)

The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...

UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1

MFCS1

Available

7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА

MFCS1

Оборудование для изучения сил в различных сборках плоских ферм

The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", designed by EDIBON, allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the...

UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2

MFCS2

Available

7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА

MFCS2

Оборудование для изучения сил в статически неопределимых фермах

The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", designed by EDIBON, allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in...

UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG

MFPG

Available

7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА

MFPG

Оборудование для изучения сил в стрелах крана

The Unit for studying Forces in a Jib Crane, "MFPG", has been designed by EDIBON to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in...

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ