KSGT Оборудование для изучения кинематики зубчатых передач

7.1.2.2.- ПРИВОДЫ 14.1.2.2.- ПРИВОДЫ

ИННОВАЦИОННЫЕ СИСТЕМЫ

The Unit for the Kinematic Study of Gear Trains, "KSGT", has been designed by EDIBON to perform the kinematic study of spur gears and planetary gears.

Посмотреть общее описание

Каталог

Спецификации конкурса

Расширения

ICAI

Программное Обеспечение для Интерактивного Компьютерного Обучения

НОВОСТИ ПО ТЕМЕ

ОБЩЕЕ ОПИСАНИЕ

The Unit for the Kinematic Study of Gear Trains, "KSGT", designed by EDIBON, includes a pivoting rail with a fixed shaft, to which two additional shafts can be attached at different positions depending on the experiment.

The cogwheels may be assembled on the shafts in combination, thus studying different gear ratios.

The spur gears can be studied having the pivoting rail fixed. One or two more shafts, and therefore one or two more cogwheels, may be placed on the rail.

Planetary gear trains can be studied with the pivoting rail free to rotate.. The adjustable rail acts as the planet carrier and supports the movable shaft on which the planet gears are mounted. The movement of the adjustable rail serves as the input to the planetary gear transmission. The planet gears transmit their motion to the sun gear, which is the output element of the gear train.

The gear ratio may be determined in both cases by counting the complete turns of the cogwheels.

УПРАЖНЕНИЯ И ПРИМЕРЫ С ИНСТРУКЦИЯМИ

РУКОВОДСТВО ПО ПРАКТИЧЕСКИМ УПРАЖНЕНИЯМ ВКЛЮЧЕНО В РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ

Study of single-stage spur gears. Determine the gear ratio.
Study of multistage spur gears. Determine the gear ratio.
Study of planetary gears. Determine the gear ratio.

ДОПОЛНИТЕЛЬНОЕ ОБОРУДОВАНИЕ

MTSF

Available

14.1.2.2.- ПРИВОДЫ

MTSF

Оборудование для червячной передачи

The Worm and Wheel Unit, "MTSF", designed by EDIBON, allows to demonstrate the principle of a worm gear.The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel.The worm and wheel are...

ACCELERATION OF GEARED SYSTEM UNIT - MAE

Available

14.1.2.2.- ПРИВОДЫ

MAE

Оборудование для изучения ускорения в зубчатых передачах

The "MAE" unit includes six gears. Two of them can have another position in the shafts to vary the gear ratio, allowing to obtain a different moment of inertia and, therefore, to accelerate the system.Additionally, there are three masses of...

UNIT TO STUDY SIMPLE DRIVES ASSEMBLY - MSDA

MSDA

Available

14.1.2.2.- ПРИВОДЫ

MSDA

Оборудование для монтажа простых передач

The Simple Drives Assembly Unit, "MSDA", designed by EDIBON, allows the knowledge and learning of the fundamentals of the mechanical transmission technique, as well as the assembly, disassembly and experimentation with simple gears.The unit allows...

UNIT TO STUDY COMBINED DRIVES ASSEMBLY - MCDA

MCDA

Available

14.1.2.2.- ПРИВОДЫ

MCDA

Оборудование для монтажа комбинированных передач

The Unit to Study Combined Drives Assembly, "MCDA", designed by EDIBON, allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology.With this unit,...

UNIT TO STUDY GEAR TRAIN ASSEMBLY - MGTA

MGTA

Available

14.1.2.2.- ПРИВОДЫ

MGTA

Оборудование для монтажа передачи с шестернями

The Study Gear Train Assembly Unit, "MGTA", designed by EDIBON, allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the...

Available

14.1.2.2.- ПРИВОДЫ

MGE

Оборудование для изготовления зубчатых передач

The Gear Generation Unit, "MGE", has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...

Available

14.1.2.2.- ПРИВОДЫ

MEE

Оборудование подъемного механизма с зубчатыми передачами

The Geared Lifting Unit, "MEE", has been designed by EDIBON to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support...

DMGT

Available

7.1.2.2.- ПРИВОДЫ

DMGT

Оборудование для Динамического Анализа Многоступенчатых Зубчатых Передач

The Dynamic Multistage Gear Train Analysis Unit, "DMGT", has been designed by EDIBON to study the dynamic behavior of a multistage spur gear system, as well as the influence of inertia and motion.The multistage system consists of an input shaft...

MESE-T

Available

7.1.2.2.- ПРИВОДЫ

MESE-T

Изучение зубчатых колес

The Geared Study, "MESE/T", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission. The Gear Study,...

КАЧЕСТВО

ПОСЛЕПРОДАЖНОЕ ОБСЛУЖИВАНИЕ

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ