AE-PLC-MR3 Rotary Table Workstation 3

ROTARY TABLE WORKSTATION 3 - AE-PLC-MR3

SISTEMAS INOVADORES

The "AE-PLC-MR3" is a processing workstation with a rotary table commanded by a PLC.

Ver descrição geral

Descrição Geral

The "AE-PLC-MR3" is a processing workstation with a rotary table commanded by a PLC. This unit takes a piece from the input area, checks if the position of piece is correct, and simulates drilling the piece with a movable drilling machine. Finally the workstation places the piece to the exit piece area. The "AE-PLC-MR3" also includes a polish tool to change the process and simulates the polishing of the piece.

The "AE-PLC-MR3" workstation is designed as a modular system to facilitate the understanding of the unit. The main components are:

  • The PLC: is composed by the CPU PLC unit and all the extra modules needed to perform a correct working of the workstation.
  • The control panel: with start/stop button, emergency pushbutton, reset button, light indicators to show current state of the process, etc.
  • The workstation: is composed by real industrial components used by the industrial processing systems with rotary tables such as limit switch sensors, capacitive sensors, drilling machine, etc.

The "AE-PLC-MR3" is an independent workstation that can work alone and/or in conjunction with other workstations to make up a complete Flexible Manufacturing system*.

*The Flexible manufacturing systems product list is available at "Flexible Manufacturing Systems (FMS)" area of the general catalogue.

EXERCÍCIOS E PRÁTICAS GUIADAS

EXERCÍCIOS PRÁTICOS GUIADOS INCLUÍDOS NO MANUAL

  1. Introduction to flexible manufacturing system (FMS).
  2. Introduction to electrical actuators.
  3. Study of the sensor detection.
  4. Manual control of the rotary table system.
  5. Manual control of the quality control and drilling process on a rotary table.
  6. Automatic control of the rotary table system.
  7. Automatic control of the quality control and drilling process on a rotary table.
  8. Change the parameters of the rotary table process.
  9. Optimize the process time.
  10. Study and analysis of the faults inserted in the process with the fault generation module.

ELEMENTOS NECESSÁRIOS

ELEMENTOS RECOMENDADOS ADICIONAIS

EQUIPAMENTOS SIMILARES DISPONÍVEIS

Qualidade

Serviço pós-venda

Solicitar informação