NEW Basic Mechanics course
Ler mais7.1.- ENGENHARIA MECÂNICA
Engenharia mecânica é a aplicação de física aos elementos que nos rodeiam para melhorar os dispositivos mecânicos existentes ou criar novos dispositivos. Uma vez que se baseia em princípios físicos, a sua origem remonta à origem desses princípios e o seu desenvolvimento está estreitamente ligado aos avanços em mecânica. No entanto, não foi até à invenção do motor vapor que se tornou um dos pilares do desenvolvimento da indústria.
Ver maisA Revolução Industrial do século XVII teve lugar como resultado da criação deste dispositivo. A partir desse momento, com as contribuições de cientistas e engenheiros tão importantes como Watt, Stephenson, Tesla ou Rankine, iniciou-se uma renovação sem precedentes tanto do conceito como do desenvolvimento de novas máquinas.
O conceito de indústria, como era conhecido até esse momento, mudou com o desenvolvimento dessas máquinas. Produção de massa foi implementada, máquina desenhos foram melhorados e, consequentemente, a gama de processos de produção foi aumentada, resultando numa variedade impensável de novos produtos adaptados às necessidades da sociedade.
Na engenharia mecânica, vale a pena mencionar os seguintes campos de estudo e aplicação:
- Mecanismos.
- Estruturas.
- Dinâmica.
- Vibrações.
- Oscilações.
No presente, qualquer indústria, desde alimentos até aeroespacial, debe estar ao mais alto nível de tecnologia inovação. Portanto, pesquisa e desenvolvimento de novos dispositivos é particularmente importante ter sempre o mais recente tecnologia e estar ao nível exigido pela indústria 4.0.
Ver produtos
Materiais Relacionados
ENGENHARIA MECÂNICA UNITS
14.1.2.2.- ENGRENAGENS
MCDA
The Combined Drives Assembly Unit, "MCDA", allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology.With this unit, practices can be carried out to...
14.1.2.2.- ENGRENAGENS
MGTA
Equipamento de Montagem de Trens de Engrenagens
The Unit to Study Gear Train Assembly, "MGTA", allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the technique of mechanical...
14.1.2.2.- ENGRENAGENS
MGE
Equipamento de Geração de Engrenagens
The Gear Generation Unit, "MGE", has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...
14.1.2.2.- ENGRENAGENS
MEE
Equipamento Elevador com Engrenagens
The Geared Lifting Unit, "MEE", has been designed to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support the gear...
7.1.2.2.- ENGRENAGENS
MESE-T
Estudo de Engrenagens
The Geared Study Drive Unit, "MESE", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission.For the...
7.1.2.2.- ENGRENAGENS
KSGT
Equipamento para o Estudo Cinemático de Trens de Engrenagens
The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...
7.1.3.- ESTÁTICA E DINÂMICA
MEMB2
Equipamento de Estudo de Equilíbrio de Momentos em uma Alavanca de Dois Braços
The Unit for studying Equilibrium of Moments on a Two Arm Lever,"MEMB2", allows to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme of a vertical support...
7.1.3.- ESTÁTICA E DINÂMICA
MBMRC
Equipamento de Balanceamento de Massas Recíprocas, Controlado por Computador (PC)
The Computer Controlled Balance of Reciprocating Masses Unit, "MBMRC", is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...
7.1.3.- ESTÁTICA E DINÂMICA
MEAL
Equipamento de Estudo e Análise de Cames
The Cam Analysis Unit "MEAL" allows to observe the effect of the profile of a cam, the study of the displacement, velocity and acceleration profiles of the cam and the identification of the factors that can modify the dynamics of the cam. This...
7.1.3.- ESTÁTICA E DINÂMICA
MDFC
Equipamento para Demonstração da Força de Coriolis
The Coriolis Force Demonstration Unit, "MDFC", is used to observe the deflection of a jet of water generated by a pump attached to a rotating arm that rotates to different speeds in a horizontal plane. An electronically controlled motor rotates...
7.1.3.- ESTÁTICA E DINÂMICA
MFCE
Equipamento para Estudo de Força Centrífuga
The Centrifugal Force Unit, "MFCE", is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis. The unit consists of a vertical axis of rotation and a rotating arm....
7.1.3.- ESTÁTICA E DINÂMICA
MGI
Giroscópio
The Gyroscope, "MGI", allows the experimental demonstration of the different rotation modes of a gyroscope and the moments generated by the gyroscopic effect. The rotor of the electric motor (rotating motor) shares a horizontally supported shaft...
7.1.3.- ESTÁTICA E DINÂMICA
CGU
Equipamento de Reguladores Centrífugos
The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...
7.1.3.- ESTÁTICA E DINÂMICA
MED
Equipamento de Equilíbrio Dinâmico/Estático
The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...
7.1.3.- ESTÁTICA E DINÂMICA
MES
Equipamento de Equilíbrio Simples
The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...
7.1.3.- ESTÁTICA E DINÂMICA
MIF
Equipamento de Volante de Inércia
The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...
7.1.3.- ESTÁTICA E DINÂMICA
MRYE1
Equipamento de Roda e Eixo
The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...
7.1.3.- ESTÁTICA E DINÂMICA
MRYE2
Equipamento de Roda e Eixo Diferencial
The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...
7.1.3.- ESTÁTICA E DINÂMICA
MELH
Equipamento para Estudo da Lei de Hooke
The Unit for studying Hooke's Law, "MELH", demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring – mass system.The...
7.1.3.- ESTÁTICA E DINÂMICA
MSHU
Equipamento de Movimento Harmônico Simples
This Simple Harmonic Motion Unit, "MSHU", allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a support that allows...
7.1.3.- ESTÁTICA E DINÂMICA
SRI
Equipamento para Estudo do Momento de Inércia Rotacional
The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...
7.1.4.- VIBRAÇÕES E OSCILAÇÕES
MEVTC
Equipamento de Estudo de Vibrações Torcionais, Controlado por Computador (PC)
The Computer Controlled Torsional Vibration Unit, "MEVTC" is designed to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with one, two or three...
7.1.4.- VIBRAÇÕES E OSCILAÇÕES
MVRE
Equipamento de Vibração em Mola Espiral
The Vibration of Coil Spring Unit, "MVRE", unit has been designed to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion. In this sense, the unit consists of a rigid...
7.1.4.- VIBRAÇÕES E OSCILAÇÕES
MVL
Equipamento de Vibrações Livres
The Free Vibration Unit, "MVL", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be made to the...