Terlaris
Menampilkan 253 -288 dari 921 produk
ADVANCED DISSECTIBLE AND CONFIGURABLE ELECTRICAL MACHINES - AEL-EMT-KIT
  • AEL-EMT-KIT
Available
4.3.3.- PRINSIP FISIK DAN DESAIN MESIN LISTRIK
AEL-EMT-KIT
Mesin Listrik yang Dapat Dikonfigurasi dan Dibongkar Secara Lanjutan
The application of Advanced Configurable and Demountable Electrical Machines, "AEL-EMT-KIT", unveils a world of innovation and know-how in the field of electrical engineering. These machines, carefully designed by EDIBON, represent an invaluable...
FREEZE DRYER - BLIO
  • BLIO
Available
11.1.7.- PENGERINGAN DAN PENDINGINAN
BLIO
Mesin Pembeku Kering
The Freeze-Dryer, "BLIO", is able to carry out the freeze-drying process for the drying of different products inside a transparent chamber that allows the control of the pressure, and on heatable trays that allow to control the temperature of the...
AUTOMATIC STAMPING PRESS  - N-EM-PAE
  • N-EM-PAE
Available
6.2.2.1.- SISTEM MANUFAKTUR
N-EM-PAE
Mesin Press Stamping Otomatis
The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...
STIRLING MOTOR - TMSB
  • TMSB
Available
9.8.- MESIN TERMAL
TMSB
Mesin Stirling
The Stirling Motor, "TMSB", is used to demonstrate the operation of a thermodynamic machine for the conversion of energy. It converts thermal energy into mechanical energy and operates as a motor (heat engine). Additionally it can operate an...
COMPUTER CONTROLLED STIRLING MOTOR - TMSC
  • TMSC
Available
5.3.11.- SISTEM NON-KONVENSIONAL LAINNYA
TMSC
Mesin Stirling, Dikendalikan dari Komputer (PC)
The Computer Controlled Stirling Motor, "TMSC", is used to demonstrate the operation of a thermodynamic machine for the conversion of energy. It converts thermal energy into mechanical energy and operates as a motor (heat engine). Additionally it...
COMPLETE AIR CONDITIONING SYSTEM MODEL - TRAMC/4
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN
TRAMC/4
Model Klimatisasi Lengkap
Aksesori dari TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
CUTAWAY MODELS OF TRANSMISSION OF MOTION UNITS - CMTM
  • CMTM
Available
7.4.1.- MODEL BAGIAN
CMTM
Model Potongan Peralatan Transmisi Gerakan
Mechanical transmission is any device that propagates power between two or more elements of a machine. The most common mechanical transmissions are cables, chains, belts, gears, pulleys, friction wheels, friction discs, camshafts,...
RADIAL FLOW TURBINE MODEL - HT-FR
  • Aksesori dari HTMC
Available
8.7.3.- TURBIN
HT-FR
Model Turbin Aliran Radial
Aksesori dari HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
FRANCIS TURBINE MODEL - HT-F
  • Aksesori dari HTMC
Available
8.7.3.- TURBIN
HT-F
Model Turbin Francis
Aksesori dari HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
KAPLAN TURBINE MODEL - HT-K
  • Aksesori dari HTMC
Available
8.7.3.- TURBIN
HT-K
Model Turbin Kaplan
Aksesori dari HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
PELTON TURBINE MODEL - HT-P
  • Aksesori dari HTMC
Available
8.7.3.- TURBIN
HT-P
Model Turbin Pelton
Aksesori dari HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
DIGITAL ELECTRONICS FUNDAMENTALS MODULE - N-M11
  • N-M11
Available
14.2.1.3.- ELEKTRONIK DIGITAL
N-M11
Modul Dasar Elektronika Digital
Digital systems are systems for processing, treatment or transmission of information, in which such information is limited to take values in a discrete set. These signals (whose magnitude can only take one value from a discrete set of values) are...
ELECTROMAGNETISM MODULE - N-M17
  • N-M17
Available
14.2.1.1.- KONSEP HUKUM LISTRIK DASAR
N-M17
Modul Elektromagnetisme
Electromagnetism is the interaction between electric charges. It is described in terms of charges interacting between of electric and magnetic fields.With the Electromagnetism Module, "N-M17", designed by EDIBON, the operation of electromagnetic...
POWER ELECTRONICS MODULE - N-M9
  • N-M9
Available
14.2.1.6.- DAYA ELEKTRONIK
N-M9
Modul Elektronika Daya
Semiconductors used in power electronics operate as switches and therefore it is interesting to know the conduction characteristics, switching and control methods.With Power Electronics Module, "N-M9", designed by EDIBON, the operation of MOSFET...
FILTERS MODULE - N-M8
  • N-M8
Available
14.2.1.2.- ELEKTRONIK ANALOG
N-M8
Modul Filter
An electronic filter is an element that allows electrical signals to pass through it, at a specific frequency or frequency ranges while preventing the passage of others, being able to modify both, their amplitude and phase. It is a device that...
ELECTRIC NETWORKS MODULE - N-M16
  • N-M16
Available
14.2.1.1.- KONSEP HUKUM LISTRIK DASAR
N-M16
Modul Jaringan Listrik
After studying the basic knowledge of electrical networks, we must understand and investigate the dependence between current and voltage applied to different electrical devices.With the Electric Networks Module, "N-M16", designed by EDIBON, it is...
OPTOELECTRONICS MODULE - N-M14
  • N-M14
Available
14.2.1.4.- SEMIKONDUKTOR
N-M14
Modul Optoelektronik
Optoelectronics is the link between optical systems and electronic systems. Optoelectronic components are those whose operation is directly related to light.They are semiconductor devices capable of producing light radiation within the human...
OSCILLATORS MODULE - N-M6
  • N-M6
Available
14.2.1.2.- ELEKTRONIK ANALOG
N-M6
Modul Osilator
Oscillators operation is usually very similar in all of them: the oscillating circuit produces an oscillation, then the amplifier increases it and finally the feedback network takes a part of the energy from the oscillating circuit and introduces...
OWN DEVELOPMENT MODULE - N-M15
Available
2.2.- KITS UNTUK SIRKUIT PERAKITAN
N-M15
Modul Pengembangan Sendiri
Aksesori dari M-KITS
The Own Development Module "N-M15", designed by EDIBON, consists of a circuit board that will allow the realization of a set of assemblies on the mentioned board, allowing the study of the basic concepts of direct current circuits.The circuits can...
OPERATIONAL AMPLIFIERS MODULE - N-M7
  • N-M7
Available
14.2.1.2.- ELEKTRONIK ANALOG
N-M7
Modul Penguat Operasional
Operational amplifiers are compact, active, linear and high-gain devices designed to provide the desired transfer function. An operational amplifier consists of an electronic circuit having two inputs and one output. The output is the difference...
ANALOG/DIGITAL CONVERTERS MODULE - N-M60
  • N-M60
Available
2.3.3.- ELEKTRONIK DIGITAL
N-M60
Modul Pengubah Analog/Digital
Most of the "information" generated in the world by various physical phenomena has a strong analogical character. This means that the information undergoes a continuous variation within certain limits determined over time. Of course, there is also...
DIGITAL/ANALOG CONVERTERS MODULE - N-M61
  • N-M61
Available
2.3.3.- ELEKTRONIK DIGITAL
N-M61
Modul Pengubah Digital/Analog
Digital/analog conversion happens when you want to recover or re-obtain a digital signal that has been processed and we want to regenerate it. A signal that has been sampled, for example, a temperature signal and we need to return it to the...
FLOW TEST MODULE - BS4
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS4
Modul Pengujian Aliran
Aksesori dari BS
The objective of Flow Test Module, "BS4", is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank,...
FLOW TEST MODULE FOR PLC - BS4-PLC
Available
6.2.3.- INSTRUMENTASI DAN KONTROL DENGAN PLC
BS4-PLC
Modul Pengujian Aliran untuk PLC
Aksesori dari BS-PLC
The "BS4-PLC" has been designed to study the flow measurement techniques and control with PLC. This unit is unit with two tanks assembled on a structure with a pumping system that allows pumping the water from the reservoir tank, through the...
VIBRATIONS AND/OR DEFORMATIONS TEST MODULE - BS1
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS1
Modul Pengujian Getaran dan/atau Deformasi
Aksesori dari BS
Vibrations and/or Deformations Test Module, "BS1" has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one...
LIQUID LEVEL TEST MODULE - BS6
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS6
Modul Pengujian Level Cairan
Aksesori dari BS
The Liquid level Test Module, "BS6", has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...
LIGHT TEST MODULE - BS10
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS10
Modul Pengujian Pencahayaan
Aksesori dari BS
The objective of the Light Test Module, "BS10", is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage...
LIGHT TEST MODULE FOR PLC - BS10-PLC
Available
6.2.3.- INSTRUMENTASI DAN KONTROL DENGAN PLC
BS10-PLC
Modul Pengujian Pencahayaan untuk PLC
Aksesori dari BS-PLC
The "BS10-PLC" has been designed to study different light measurement techniques and control light intensity through a PLC. This unit is composed of a lamp whose intensity can be controlled according to the voltage applied and a series of...
PNEUMATIC TEST MODULE - BS9
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS9
Modul Pengujian Pneumatik
Aksesori dari BS
The Pneumatics Test Module, "BS9", has been designed to teach techniques of control and handling of a pneumatic piston.All connections of the different BS9 mechanisms will have output through a group of 2 mm. terminals. They are placed in the...
PNEUMATIC TEST MODULE FOR PLC - BS9-PLC
Available
6.2.3.- INSTRUMENTASI DAN KONTROL DENGAN PLC
BS9-PLC
Modul Pengujian Pneumatik untuk PLC
Aksesori dari BS-PLC
The "BS9-PLC" has been designed to study the control and handling techniques of a pneumatic actuator through a PLC. The actuator is a double acting pneumatic cylinder that allows moving a platform. The displacement of the piston axle is detected...
PROXIMITY TEST MODULE - BS8
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS8
Modul Pengujian Proksimitas
Aksesori dari BS
The Proximity Test Module, "BS8", has been designed to teach techniques to detect the proximity of objects, focusing on the distance at which each sensor is able to detect the object and the type of material it can detect. In the upper part there...
TEMPERATURE TEST MODULE - BS2
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS2
Modul Pengujian Suhu
Aksesori dari BS
The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....
TACHOMETER TEST MODULE - BS7
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS7
Modul Pengujian Tachometer
Aksesori dari BS
The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...
PRESSURE TEST MODULE - BS3
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS3
Modul Pengujian Tekanan
Aksesori dari BS
The Pressure Test Module, "BS3", has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques. On the left upper side of the module there is a pressure...
PRESSURE TEST MODULE FOR PLC - BS3-PLC
Available
6.2.3.- INSTRUMENTASI DAN KONTROL DENGAN PLC
BS3-PLC
Modul Pengujian Tekanan untuk PLC
Aksesori dari BS-PLC
The "BS3-PLC" has been designed to study the pressure measurement techniques and control application with a PLC. This unit is equipped with a pressure chamber with several sensors, with different uses and applications, adjusted to measure the...
SEMICONDUCTORS I MODULE - N-M3
  • N-M3
Available
14.2.1.4.- SEMIKONDUKTOR
N-M3
Modul Semikonduktor I
Semiconductors are materials characterized by a resistivity lower than an insulator and higher than a conductor. There are different types of semiconductors, among which we could highlight diodes as extrinsic semiconductors (formed by more than...
Meminta informasi