14.- TEKNIK BIOMEDIS

Teknik Biomedis mempelajari penerapan ilmu teknik dalam bidang biologi dan kedokteran. Kombinasi dari kontrol elektronik dan sistem instrumentasi serta penerapan algoritma matematika dan prinsip fisika dan kimia memungkinkan Teknik Biomedis untuk menyelidiki dan mengembangkan teknik dan perangkat baru untuk memecahkan masalah klinis. Disiplin ini berkisar dari desain elemen diagnostik dan alat perangkat lunak medis hingga analisis fisiologis untuk mempelajari jantung atau sistem saraf.

Lihat Lebih Banyak

Teknik Biomedis telah berkembang selama bertahun-tahun seiring dengan kemajuan ilmu pengetahuan dan teknologi. Saat ini, perangkat seperti sistem pemantauan tanda vital atau perangkat diagnostik memfasilitasi tugas perawatan kesehatan. Perkembangan metode analisis citra seperti sinar-X, ultrasound dan magnetic resonance imaging memungkinkan tubuh dipelajari dengan jelas dan cepat. Selain itu, perangkat lunak telemedicine dan manajemen rumah sakit digunakan.

Masa depan Teknik Biomedis memiliki jalur perkembangan yang panjang, karena masyarakat saat ini membutuhkan solusi medis yang cepat dan efisien. Perangkat elektronik yang digunakan setiap hari akan memungkinkan pemantauan pasien jarak jauh, mengikuti nilai tanda vital untuk dapat menganalisis gejala sebelum masalah kesehatan dan bahkan mencegah kemungkinan masalah. Tren lain dalam Teknik Biomedis adalah penyederhanaan alat laboratorium. Sistem seperti Lab On a Chip (LOC) akan mengintegrasikan fungsi laboratorium pada satu chip. Teknik bedah robotik baru, bahan organik baru untuk pembuatan jaringan buatan dan jaringan regeneratif, atau pencetakan 3D organ buatan akan memungkinkan untuk memenuhi kebutuhan medis di masa depan.

Lihat Produk
Materi Terkait
TEKNIK BIOMEDIS SUBCATEGORIES

14.1.- BIOMEKANIKA

Biomekanik mempelajari mekanisme pergerakan makhluk hidup, di antaranya gerakan tubuh manusia. Penelitian ini berkisar dari gerakan yang paling sederhana dalam kehidupan sehari-hari, seperti Kerja atau olah raga, hingga pergerakan beberapa organ dalam, seperti jantung. Untuk mempelajari kinetika...
lihat

14.2.- ELEKTRONIK BIOMEDIS

Teknik Biomedis mempelajari penerapan pengetahuan teknik dalam bidang biologi dan kedokteran. Salah satu bidang yang paling relevan dari teknik ini adalah Elektronik Biomedis, di dalamnya konsep elektronik diterapkan untuk pengembangan instrumentasi medis.Banyak proses yang berkembang dalam dunia...
lihat

14.3.- PERALATAN BIOMEDIS

Peralatan Biomedis adalah seperangkat instrumen yang digunakan dalam bidang kedokteran , biologi dan farmakologi . Rancangan peralatan biomedis berkaitan langsung dengan Instrumentasi Biomedis , dimana instrumen dirancang untuk memperoleh informasi, menerapkan perlakuan atau melakukan...
lihat
TEKNIK BIOMEDIS UNITS
Menampilkan 25 -48 dari 181 produk
SIMPLE DRIVES ASSEMBLY UNIT - MSDA
  • MSDA
Available
14.1.2.2.- RODA GIGI
MSDA
Perangkat Pemasangan Transmisi Sederhana
The Simple Drives Assembly Unit, "MSDA", allows the knowledge and learning of the fundamentals of the mechanical transmission technique, as well as the assembly, disassembly and experimentation with simple gears.The unit allows to carry out...
COMBINED DRIVES ASSEMBLY UNIT - MCDA
  • MCDA
Available
14.1.2.2.- RODA GIGI
MCDA
Perangkat Pemasangan Transmisi Gabungan
The Combined Drives Assembly Unit, "MCDA", allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology.With this unit, practices can be carried out to...
GEAR TRAIN ASSEMBLY UNIT - MGTA
  • MGTA
Available
14.1.2.2.- RODA GIGI
MGTA
Perangkat Pemasangan Gigi Ganda
The Unit to Study Gear Train Assembly, "MGTA", allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the technique of mechanical...
GEAR GENERATION UNIT - MGE
  • MGE
Available
14.1.2.2.- RODA GIGI
MGE
Gear Generation Unit
The Gear Generation Unit, "MGE", has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...
GEARED STUDY - MESE-T
  • MESE-T
Available
7.1.2.2.- RODA GIGI
MESE-T
Geared Study
The Geared Study Drive Unit, "MESE", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission.For the...
GEARED LIFTING UNIT - MEE
  • MEE
Available
14.1.2.2.- RODA GIGI
MEE
Geared Lifting Unit
The Geared Lifting Unit, "MEE", has been designed to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support the gear...
UNIT FOR THE KINEMATIC STUDY OF GEAR TRAINS - KSGT
  • KSGT
Available
7.1.2.2.- RODA GIGI
KSGT
Unit for the Kinematic Study of Gear Trains
The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...
UNIT FOR STUDYING EQUILIBRIUM OF MOMENTS ON A TWO ARM LEVER - MEMB2
  • MEMB2
Available
7.1.3.- STATICS AND DYNAMICS
MEMB2
Unit for studying Equilibrium of Moments on a Two Arm Lever
The Unit for studying Equilibrium of Moments on a Two Arm Lever,"MEMB2", allows to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme of a vertical support...
COMPUTER CONTROLLED BALANCE OF RECIPROCATING MASSES UNIT - MBMRC
  • MBMRC
Available
7.1.3.- STATICS AND DYNAMICS
MBMRC
Computer Controlled Balance of Reciprocating Masses Unit
The Computer Controlled Balance of Reciprocating Masses Unit, "MBMRC", is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...
CAM ANALYSIS UNIT - MEAL
  • MEAL
Available
7.1.3.- STATICS AND DYNAMICS
MEAL
Cam Analysis Unit
The Cam Analysis Unit "MEAL" allows to observe the effect of the profile of a cam, the study of the displacement, velocity and acceleration profiles of the cam and the identification of the factors that can modify the dynamics of the cam. This...
CORIOLIS FORCE DEMONSTRATION UNIT - MDFC
  • MDFC
Available
7.1.3.- STATICS AND DYNAMICS
MDFC
Coriolis Force Demonstration Unit
The Coriolis Force Demonstration Unit, "MDFC", is used to observe the deflection of a jet of water generated by a pump attached to a rotating arm that rotates to different speeds in a horizontal plane. An electronically controlled motor rotates...
CENTRIFUGAL FORCE UNIT  - MFCE
  • MFCE
Available
7.1.3.- STATICS AND DYNAMICS
MFCE
Centrifugal Force Unit
The Centrifugal Force Unit, "MFCE", is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis. The unit consists of a vertical axis of rotation and a rotating arm....
GYROSCOPE - MGI
  • MGI
Available
7.1.3.- STATICS AND DYNAMICS
MGI
Gyroscope
The Gyroscope, "MGI", allows the experimental demonstration of the different rotation modes of a gyroscope and the moments generated by the gyroscopic effect. The rotor of the electric motor (rotating motor) shares a horizontally supported shaft...
CENTRIFUGAL GOVERNOR UNIT - CGU
  • CGU
Available
7.1.3.- STATICS AND DYNAMICS
CGU
Centrifugal Governor Unit
The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...
STATIC AND DYNAMIC BALANCING UNIT - MED
  • MED
Available
7.1.3.- STATICS AND DYNAMICS
MED
Static and Dynamic Balancing Unit
The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...
SIMPLE BALANCING UNIT - MES
  • MES
Available
7.1.3.- STATICS AND DYNAMICS
MES
Simple Balancing Unit
The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...
INERTIA FLYWHEEL UNIT - MIF
  • MIF
Available
7.1.3.- STATICS AND DYNAMICS
MIF
Inertia Flywheel Unit
The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...
WHEEL AND AXLE UNIT  - MRYE1
  • MRYE1
Available
7.1.3.- STATICS AND DYNAMICS
MRYE1
Wheel and Axle Unit
The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...
UNIT FOR STUDYING HOOKE´S LAW - MELH
  • MELH
Available
7.1.3.- STATICS AND DYNAMICS
MELH
Unit for studying Hooke's Law
The Unit for studying Hooke's Law, "MELH", demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring – mass system.The...
WHEEL AND DIFFERENTIAL AXLE UNIT  - MRYE2
  • MRYE2
Available
7.1.3.- STATICS AND DYNAMICS
MRYE2
Wheel and Differential Axle Unit
The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...
COMPUTER CONTROLLED TORSIONAL VIBRATION UNIT - MEVTC
  • MEVTC
Available
7.1.4.- GETARAN DAN OSILASI
MEVTC
Computer Controlled Torsional Vibration Unit
The Computer Controlled Torsional Vibration Unit, "MEVTC" is designed to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with one, two or three...
VIBRATION OF COIL SPRING UNIT - MVRE
  • MVRE
Available
7.1.4.- GETARAN DAN OSILASI
MVRE
Vibration of Coil Spring Unit
The Vibration of Coil Spring Unit, "MVRE", unit has been designed to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion. In this sense, the unit consists of a rigid...
FREE VIBRATION UNIT - MVL
  • MVL
Available
7.1.4.- GETARAN DAN OSILASI
MVL
Free Vibration Unit
The Free Vibration Unit, "MVL", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be made to the...
FREE & FORCED VIBRATION UNIT - MVLF
  • MVLF
Available
7.1.4.- GETARAN DAN OSILASI
MVLF
Free & Forced Vibration Unit
The Free and Forced Vibration Unit, "MVLF", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free and forced vibrations of a simple spring-mass-damper system. Simple...
Meminta informasi