6.1.- MEKATRONIK

Mekatronika adalah bidang teknik yang mencakup teknik mesin, teknik elektronik, dan teknik komputer. Tujuan utama mekatronika adalah otomatisasi mesin. Untuk mencapai tujuan ini, Industri Otomasi telah mengembangkan elektromekanis dan sistem terkomputerisasi untuk memiliki kontrol optimal atas proses industrinya. Model matematika untuk mengembangkan sistem dengan perilaku yang diinginkan diperoleh dengan elektronik kontrol.

Lihat Lebih Banyak

Saat ini, mekatronika berupaya meningkatkan mekanisme untuk mendapatkan operasi yang terkontrol dan otonom, merancang PID (Proportional-Integral-Derivative Controller) algoritma kontrol untuk menjalankan kontrol umpan balik dan menerapkan kontrol optimal, kontrol prediktif, dan kontrol non-linier teknik. Semua teknik kontrol ini diterapkan pada kontrol variabel suhu, aliran, tekanan, dll. Menggunakan instrumentasi industri.

Inovasi berkelanjutan dan peningkatan teknologi mengarahkan mekatronika ke desain mekanisme yang lebih kompleks dan canggih, dengan fitur yang lebih baik dan kapasitas kontrol yang besar. Mereka dapat melakukan proses otomatis melalui aktuasi pneumatik dan elektropneumatik, memperoleh gerakan cepat dan berulang, atau hidraulik atau Aktuasi elektrohidraulik, memperoleh torsi besar, kontrol gerak yang presisi dan cepat melalui teknologi motor servo, dan instrumentasi industri berbiaya rendah, dengan hebat fitur dan dapat diterapkan di Industri 4.0 baru.

Lihat Produk
MEKATRONIK UNITS
1.- FISIKA 2.- ELEKTRONIKA 3.- KOMUNIKASI 4.- LISTRIK 5.- ENERGI 6.- MEKATRONIK & OTOMASI 7.- MEKANIKA 8.- MEKANIKA FLUIDA 9.- TERMODINAMIK DAN TERMOTEKNIK 10.- PENGENDALIAN PROSES 11.- TEKNIK KIMIA 12.- TEKNOLOGI PANGAN & AIR 13.- LINGKUNGAN HIDUP 14.- TEKNIK BIOMEDIS AKSESORIS LABORATORIUM PABRIK PILOT SESUAI PESANAN
6.1.- MEKATRONIK 6.2.- OTOMASI PLC 6.3.- KOMPUMEKATRONIK PLC
6.1.1.- KONTROL 6.1.2.- ELEKTRONIKA 6.1.3.- HIDROLIK DAN PNEUMATIKA 6.1.4.- PERANGKAT LUNAK MECHATRONICS
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS 6.1.1.2.- PENGONTROL INDUSTRI 6.1.1.3.- APLIKASI SISTEM INDUSTRI 6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK 6.1.2.2.- ELEKTRONIK TENAGA DAN ELEKTRONIK INDUSTRI 6.1.3.1.- HIDROLIKA 6.1.3.2.- PNEUMATIKA
Menampilkan 31 -60 dari 64 produk
12 24 36
TRANSDUCERS AND INSTRUMENTATION UNIT - SAIT
  • SAIT
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
SAIT
Pelatihan Tranduser dan Instrumen
The Transducers and Instrumentation Unit, "SAIT", has been designed by EDIBON to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control...
Lihat Unit
COMPUTER CONTROLLED A/D AND D/A CONVERTERS UNIT - CADDA
  • CADDA
Available
14.2.1.3.- ELEKTRONIK DIGITAL
CADDA
Unit Konverter A / D dan D / A yang Dikendalikan Komputer
The Computer Controlled A/D and D/A Converters Unit, "CADDA", unit has been designed to help the students to learn how to perform the most common procedures and study the different circuits used to convert analog signals in a digital signals and...
Lihat Unit
MODULAR SYSTEM FOR THE STUDY OF SENSORS: - BS
  • BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS
Sistem Modul Pengajaran Sensor
The Modular System for the Study of Sensors, "BS", designed by EDIBON, includes a wide range of units that include different electronic components designed to control the signal produced by the transducers (sensors and actuators) on the one hand,...
Lihat Unit
COMPUTER CONTROLLED BASIC UNIT FOR BS - BSPC
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BSPC
Unit Dasar untuk BS, Dikendalikan dari Komputer (PC)
Aksesori dari BS
The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned before a data acquisition system can effectively and accurately acquire the signal. These circuits consist...
Lihat Unit
BASE UNIT FOR BS - BSUB
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BSUB
Unit Dasar untuk BS
Aksesori dari BS
The BSUB is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned. These circuits consist of differential and instrumentation amplifiers, filters, current to voltage and...
Lihat Unit
VIBRATIONS AND/OR DEFORMATIONS TEST MODULE - BS1
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS1
Modul Pengujian Getaran dan/atau Deformasi
Aksesori dari BS
Vibrations and/or Deformations Test Module, "BS1" has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one...
Lihat Unit
TEMPERATURE TEST MODULE - BS2
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS2
Modul Pengujian Suhu
Aksesori dari BS
The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....
Lihat Unit
PRESSURE TEST MODULE - BS3
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS3
Modul Pengujian Tekanan
Aksesori dari BS
The Pressure Test Module, "BS3", has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques. On the left upper side of the module there is a pressure...
Lihat Unit
FLOW TEST MODULE - BS4
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS4
Modul Pengujian Aliran
Aksesori dari BS
The objective of Flow Test Module, "BS4", is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank,...
Lihat Unit
OVENS TEST MODULE - BS5
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS5
Modul Pengujian Oven
Aksesori dari BS
With the Ovens Test Module, "BS5", is possible to study temperature measurement techniques using several kinds of sensors placed inside the sealed place that is used as oven.This module is basically made up of an oven that contains a changeable...
Lihat Unit
LIQUID LEVEL TEST MODULE - BS6
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS6
Modul Pengujian Level Cairan
Aksesori dari BS
The Liquid level Test Module, "BS6", has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...
Lihat Unit
TACHOMETER TEST MODULE - BS7
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS7
Modul Pengujian Tachometer
Aksesori dari BS
The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...
Lihat Unit
PROXIMITY TEST MODULE - BS8
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS8
Modul Pengujian Proksimitas
Aksesori dari BS
The Proximity Test Module, "BS8", has been designed to teach techniques to detect the proximity of objects, focusing on the distance at which each sensor is able to detect the object and the type of material it can detect. In the upper part there...
Lihat Unit
PNEUMATIC TEST MODULE - BS9
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS9
Modul Pengujian Pneumatik
Aksesori dari BS
The Pneumatics Test Module, "BS9", has been designed to teach techniques of control and handling of a pneumatic piston.All connections of the different BS9 mechanisms will have output through a group of 2 mm. terminals. They are placed in the...
Lihat Unit
LIGHT TEST MODULE - BS10
  • Aksesori dari BS
Available
6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK
BS10
Modul Pengujian Pencahayaan
Aksesori dari BS
The objective of the Light Test Module, "BS10", is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage...
Lihat Unit
SERVOSYSTEMS BASIC UNIT FOR DC MOTORS - SERIN/CCB
  • SERIN/CCB
Available
6.1.2.2.- ELEKTRONIK TENAGA DAN ELEKTRONIK INDUSTRI
SERIN/CCB
Unit Pelatihan Sistem Servo Dasar (motor DC)
"SERIN/CCB" is an unit whose goal is studying low power servo systems. It is a low power DC motor speed control trainer that has a breakdown simulator. This trainer is a basic version of the Advanced and Computerised "SERIN/CC" Trainer, being...
Lihat Unit
POWER ELECTRONICS APPLICATION, WITH SCADA - AEL-PWEC
  • AEL-PWEC
Available
5.1.3.2.- KEKUATAN TRANSMISI
AEL-PWEC
Aplikasi Elektronika Daya, dengan SCADA
The Power Electronics Application, with SCADA, "AEL-PWEC", has been designed to study the most important applications related to DC power electronics, single-phase AC power electronics, three-phase AC power electronics and thyristor power...
Lihat Unit
1 KW AC INDUSTRIAL SERVOMOTOR APPLICATION - AEL-SERIN/CA-1KW
  • AEL-SERIN/CA-1KW
Available
6.1.2.2.- ELEKTRONIK TENAGA DAN ELEKTRONIK INDUSTRI
AEL-SERIN/CA-1KW
Aplikasi Servo Motor Industri AC 1 Kw
The 1 kW AC Industrial Servomotor Application, "AEL-SERIN/CA-1KW", has been designed to study the working principle and control of industrial servomotors. The "AEL-SERIN/CA-1KW" allows the user to acquire knowlegde and experience in the control of...
Lihat Unit
HYDRAULIC AND ELECTRO-HYDRAULIC APPLICATION - AE-HD
  • AE-HD
Available
6.1.3.1.- HIDROLIKA
AE-HD
Hydraulic and Electro-Hydraulic Application
The Hydraulic and Electro-Hydraulic Application, "AE-HD", is a modular unit consisting of a great variety of optional kits and elements to configure the desired Hydraulic and Electro-Hydraulic circuit.The optional hydraulic kits available with the...
Lihat Unit
HYDRAULIC POWER UNIT - HPU
  • HPU
Available
6.1.3.1.- HIDROLIKA
HPU
Hydraulic Power Unit
The Hydraulic Power Unit, "HPU", has been designed by EDIBON to include all necessary components to supply pressurized working oilto the EDIBON units with hydraulic circuits.The "HPU" has the components to measure the temperature and the pressure...
Lihat Unit
Meminta informasi