7.- MEKANIKA

Mekanika adalah disiplin ilmu yang mempelajari fenomena fisik yang mempengaruhi unsur-unsur alam. Meski disebut mekanika, sebenarnya ia mencakup mekanika klasik dan kuantum, yang merupakan dua pilar fundamental fisika modern.

Lihat Lebih Banyak

Mekanika klasik berhubungan dengan studi tentang benda kaku serta sistem bilangan terbatas atau tak terbatas (media berkelanjutan) dari derajat kebebasan, sementara mekanika kuantum mempelajari sistem skala kecil atau energi.

Seperti dalam sains eksperimental , setiap studi mekanis suatu benda melibatkan proses analisis, dari proses fisik dan perspektif matematika, dan eksperimen. Namun, tidak seperti disiplin ilmu lainnya, dalam mekanika tidaklah begitu rumit untuk mempelajari perilaku teoretis yang ditafsirkan dalam sistem nyata.

Terima kasih atas kontribusi banyak ilmuwan, seperti Newton, Lagrange, Hamilton atau Schrödinger, beberapa hukum fundamental atau prinsip mekanika dapat ditetapkan:

  • Hukum Newton.
  • Prinsip kekekalan momentum.
  • Prinsip kekekalan energi.
  • Prinsip kekekalan momentum sudut (atau kinetik) dan persamaan dasar dinamika rotasi.

Mengingat perluasan bidang studinya, lebih mudah untuk menyebutkan bidang yang paling representatif:

  • Teknik.
  • Statika.
  • Dynamics.
  • Mekanika fluida.
  • Termodinamika dan perpindahan panas.
  • Ilmu, elastisitas, dan kekuatan bahan.
  • Analisis numerik (metode elemen hingga).

Karena evolusi yang konstan dari industri, cabang dari teknik mesin, teknik otomotif dan mobil, perhitungan struktur, pengembangan mesin, serta pemasangan dan pemeliharaannya, adalah yang paling berkembang saat ini.

Lihat Produk
Materi Terkait
MEKANIKA SUBKATEGORI

7.1.- TEKNIK MESIN

Rekayasa mekanik terdiri dari penerapan fisika pada elemen-elemen di sekitar kita untuk memperbaiki perangkat mekanik yang ada atau menciptakan yang baru.Karena didasarkan pada prinsip-prinsip fisik, asal-usulnya berasal dari awal prinsip-prinsip tersebut dan perkembangannya sangat terkait dengan...
lihat

7.2.- TEKNIK MEKANIK OTOMOTIF

Industri otomotif adalah salah satu aplikasi utama teknik mesin saat ini. Kendaraan dengan mesin pembakaran dalam bensin dianggap yang terbesar Penemuan dari abad ke-20, meskipun prototipe pertama sudah dibuat pada akhir abad ke-18. Prototipe pertama berasal dari tahun 1769. Itu adalah kereta...
lihat

7.3.- TEKNIK MATERIAL

Teknik material adalah cabang ilmiah dan industri yang bertanggung jawab untuk membuat interpretasi industri dari ilmu material. Secara antropologis, berbagai tahapan manusia pengembangan telah diklasifikasikan menurut bahan yang digunakan dalam pembuatan alat (Zaman Batu, Zaman Perunggu, dll.)....
lihat

7.4.- PEMASANGAN DAN PEMELIHARAAN

Kebutuhan masyarakat saat ini adalah tantangan bagi industri apa pun, karena mereka harus terus melakukan evolusi dan pembaruan untuk beradaptasi dengan kebutuhan tersebut.Dalam beberapa tahun terakhir, sebagai akibat dari revolusi industri atau Industri 4.0 baru, munculnya Industrial Internet of...
lihat

MEKANIKA PERALATAN

Menampilkan 109 -144 dari 176 produk
COMPUTER CONTROLLED TEST BENCH FOR FOUR-CYLINDERS ENGINES, 75 KW - TBMC75
  • TBMC75
Available
7.2.3.- MESIN

TBMC75

Bangku Uji Motor 75 kW, Dikendalikan dari Komputer (PC)

The Computer Controlled Test Bench for Four Cylinders Engines, 75 kW, "TBMC75", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 75 kW.The element of the unit that offers load torque is an eddy current...
COMPUTER CONTROLLED EXHAUST GAS CALORIMETER - TBMC-CG
  • TBMC-CG
Available
7.2.3.- MESIN

TBMC-CG

Kalorimeter Gas Buang, Dikendalikan dari Komputer (PC)

The Computer Controlled Exhaust Gas Calorimeter, "TBMC-CG", is mounted on a laminated aluminium profiles frame and panels in painted steel.The main element consists on a double-wall tank made in stainless steel. Through the tank interior the...
EXHAUST GAS ANALYZER - TBMC-AGE
  • TBMC-AGE
Available
7.2.3.- MESIN

TBMC-AGE

Penganalisis Gas Buang

Measurement of the volumetric concentrations according to the procedure of nondispersiva infrared absorption.Engines selection: gasoline, butane, propane, 2/4 times, 1/2/3/4/5/6/8/12 cylinders.Fast warm-up of the measure cell.Auto-check...
COMPUTER CONTROLLED PHOTOELASTICITY UNIT - EFOC
  • EFOC
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN

EFOC

Peralatan Fotoelastisitas, Dikendalikan dari Komputer (PC)

Unit for photoelasticity practices, illustrating the subjects of the photoelasticity theory, the elasticity theory, strength of materials, and structure theory.It is very suitable for the introduction and study of photoelasticity: optical...
PHOTOELASTICITY UNIT - EFO
  • EFO
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN

EFO

Peralatan Fotoelastisitas

Unit for photoelasticity practices, illustrating the subjects of the Photoelasticity theory, the Elasticity theory, Strength of Materials, and Structure theory.It is very suitable for the introduction and study of photoelasticity: optical...
STRAIN GAUGE TRAINING UNIT - MEGE
  • MEGE
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN

MEGE

Peralatan Pelatihan Strain Gauge

The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...
UNIT FOR DETERMINING THE GAUGE FACTOR OF STRAIN GAUGES - MFGE
  • MFGE
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN

MFGE

Peralatan untuk Penentuan Faktor Strain Gauge

The Unit for Determining the Gauge Factor of Strain Gauges, "MFGE", designed by EDIBON, allows to determine the k factor of strain gauges.The bar rests on two supports with ball bearings, so that it is possible to work with a load under pure...
PHOTOELASTIC STRESS DEMONSTRATION UNIT - PSD
  • PSD
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN

PSD

Peralatan Demonstrasi Fotoelastis Tegangan

The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- UJI MEKANIK

EEU/20KN

Peralatan Uji Material Universal

The Universal Material Testing Unit, "EEU/20KN", designed by EDIBON, is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20...
BRINELL HARDNESS TESTING UNIT - EEDB
  • EEDB
Available
7.3.2.1.- UJI MEKANIK

EEDB

Peralatan Uji Kekerasan "Brinell"

The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...
CREEP TESTING UNIT - EEFCR
  • EEFCR
Available
7.3.2.1.- UJI MEKANIK

EEFCR

Peralatan Uji Fluensi "Creep"

The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...
COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC
  • EEFC
Available
7.3.2.1.- UJI MEKANIK

EEFC

Peralatan Uji Kelelahan, Dikendalikan dari Komputer (PC)

The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...
FATIGUE TESTING UNIT - EEF
  • EEF
Available
7.3.2.1.- UJI MEKANIK

EEF

Peralatan Uji Kelelahan

The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...
CHARPY AND IZOD IMPACT TESTING UNIT - EEICI
  • EEICI
Available
7.3.2.1.- UJI MEKANIK

EEICI

Peralatan Uji Dampak Charpy dan Izod

The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- UJI MEKANIK

MEBM

Peralatan Modus Tekuk Euler

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- UJI MEKANIK

MTP

Peralatan Torsi dan Lentur

The Torsion and Bend Unit, "MTP", designed by EDIBON, is a combined unit for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate...
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- UJI MEKANIK

MTB

Peralatan Torsi

The Torsion Unit, "MTB", has been designed by EDIBON to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a...
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- UJI MEKANIK

MTT

Peralatan Uji Torsi (30Nm)

To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- UJI MEKANIK

MTTU

Peralatan Uji Tarik

With the Tensile Tester Unit, "MTTU", designed by EDIBON, tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests...
CENTRIFUGAL CASTING, BUILDING-UP TRAINING SET 2 - MCEN
  • MCEN
Available
7.3.3.1.- PENDANAAN

MCEN

Kit Pengecoran Praktis: Pengecoran Sentrifugal

The Practical Casting Kit: Centrifugal Casting, "MCEN", designed by EDIBON, is an essential educational unit for teaching the fundamentals of centrifugal casting. This unit enables students to develop practical skills in centrifugal casting...
CUTAWAY MODELS OF TRANSMISSION OF MOTION UNITS - CMTM
  • CMTM
Available
7.4.1.- MODEL BAGIAN

CMTM

Model Potongan Peralatan Transmisi Gerakan

Mechanical transmission is any device that propagates power between two or more elements of a machine. The most common mechanical transmissions are cables, chains, belts, gears, pulleys, friction wheels, friction discs, camshafts,...
UNIT TO STUDY A MITRE GEAR CUTAWAY MODEL - MGCM
  • Aksesori dari CMTM
Available
7.4.1.- MODEL BAGIAN

MGCM

Peralatan Model Terpotong Transmisi Kerucut

Aksesori dari CMTM
The Unit to Study a Mitre Gear Cutaway Model provides a detailed study of this transmission system, composed of two conical cogwheels, designed to transmit motion between two intersecting shafts, usually positioned at a right angle.Due to their...
UNIT TO STUDY A TWO-STAGE SPUR GEAR CUTAWAY MODEL - SGCM/2
  • Aksesori dari CMTM
Available
7.4.1.- MODEL BAGIAN

SGCM/2

Peralatan Model Terpotong dari Roda Gigi Lurus Dua Tahap

Aksesori dari CMTM
The Unit to Study a Two-Stage Spur Gear Cutaway Model provides an in-depth analysis of these systems, which utilize two pairs of spur gears in series to achieve greater speed reduction and more efficient torque transmission.These systems are...
Meminta informasi