Today we are at the beginning of a new era, named ‘Industrie 4.0’. Let´s explain a little further the concept "Industrie 4.0"!
AEL-KNX-SFC Aplikasi Pelatihan Kontrol Keamanan dengan KNX: Kebakaran, Anti-penjebol, Banjir, dll.
SISTEM INOVATIF
The AEL-KNX-SFC is a device designed to provide hands-on experience and knowledge of KNX wiring practices specific to security systems. This unit is designed for educational and professional purposes, allowing users to study and understand the wiring, programming and commissioning techniques associated with the integration of KNX technology in security related applications.
BERITA TERKAIT
GAMBARAN UMUM
The AEL-KNX-SFC is a device designed to provide hands-on experience and knowledge of KNX wiring practices specific to security systems. This unit is designed for educational and professional purposes, allowing users to study and understand the wiring, programming and commissioning techniques associated with the integration of KNX technology in security related applications.
Key features of the AEL-KNX-SFC include:
- Practical learning scenarios: The device facilitates practical learning scenarios where users can perform hands-on exercises related to KNX wiring practices in the context of security systems.
- Simulation of Security Control Systems: Users can simulate and experiment with various security control scenarios, gaining valuable experience in integrating KNX technology to enhance security features in intelligent buildings.
- Application of KNX Wiring Techniques: The unit provides a platform for the practical application of KNX wiring techniques specific to security applications. This includes the connection and configuration of KNX devices to create a controlled learning environment.
- Comprehensive Documentation: The accompanying documentation offers detailed information on KNX wiring practices for security, providing users with complete guidance and instructions for effective learning.
- Compatibility: This unit is compatible with standard KNX devices and protocols commonly used in security systems, ensuring seamless integration into KNX-based educational and professional environments.
LATIHAN DAN PRAKTEK PEDOMAN
LATIHAN PRAKTIS YANG DIANDAL TERMASUK DALAM PANDUAN
- Basic Integration of the Security Control System: connection of the power supply for the KNX devices in the security control system.
- Connection of the KNX Room Controller: integration of the KNX room controller for centralized control of safety functions. Configuration of functions and programming of safety scenarios.
- Connection of the KNX Binary Input Module: connection and integration of the KNX binary input module to detect safety events. Programming of actions based on detected states.
- Connection of KNX Binary Output Module for Control of Safety Devices: connection and configuration of the KNX binary output module for effective control of safety devices. Adjustment of response times and activation settings.
- Simulation of Scenarios with Alarm Box: use of the buzzer box to simulate alarm situations and evaluate the response of the security system. Adjustment of responses according to different events.
- Connection and Integration of Intrusion Detectors and Security Zones: connection and programming of KNX intrusion detectors and security zones. Configuration of actions in case of intrusion detection.
- Connection of Sirens and Alarms: integration and configuration of sirens and alarms for emergency situations.
- Connection of KNX Smoke and Fire Detectors: integration and programming of smoke and fire detectors in the KNX system. Configuration of automatic responses and notifications.
- Connection of KNX Temperature and Presence Detectors: integration and configuration of temperature and presence detectors for the security of the environment. Programming of actions in case of specific events.
- Connection of KNX Flood Detectors: integration and programming of flood detectors for security against water damage. Configuration of automatic responses.
Project creation in ETS and topology definition:
- Creation of a New Project in ETS: development of a new project from scratch with the ETS software and definition of general features and establishment of basic topology of the KNX system.
- Bus Topology Definition: configuration of the KNX bus topology, identification of devices and establishment of physical addresses.
- Assignment of Physical Addresses: assignment of physical addresses to KNX devices in the project and following of addressing standards and recommendations.
- Topology Verification: verification of the consistency of the configuration and compliance with KNX system requirements.
KNX Device Diagnostics:
- Use of Diagnostic Tools: use of diagnostic tools in the ETS software to verify communication and status of KNX devices.
- Communication Testing: performing communication tests between KNX devices and the bus and identifying and solving possible connection problems.
- Telegram Analysis: analysis of telegrams sent and received by KNX devices, identification of possible errors or interferences in the network.
- Troubleshooting: diagnosis and resolution of configuration or connection errors in KNX devices and use of diagnostic tools available in the ETS software.
- Event Logging: use of event logging functions to monitor and analyze the behavior of KNX devices under different operating conditions.
PERALATAN KOMPLEMENTER
4.2.4.- KONTROL KNX / EIB CERDAS
AEL-KNX
Aplikasi Fasilitas Otomatisasi KNX di Gedung
The KNX Automation Installations in Buildings Application, "AEL-KNX", provides students, teachers and automation professionals with a unique opportunity to enter the world of KNX building automation project development, interconnection of KNX...
4.2.4.- KONTROL KNX / EIB CERDAS
AEL-KNX-LIC
Aplikasi Pelatihan Kontrol Pencahayaan dengan KNX
The AEL-KNX-LIC is an application designed to facilitate the study and understanding of KNX wiring practices specifically tailored for lighting control systems. This unit serves as a valuable tool for educational and professional purposes,...
4.2.4.- KONTROL KNX / EIB CERDAS
AEL-KNX-HVAC
Aplikasi Pelatihan Kontrol HVAC dengan KNX"
The AEL-KNX-HVAC is an application designed to facilitate the study and understanding of KNX-based Heating, Ventilation and Air Conditioning (HVAC) control systems. This unit serves as a valuable tool for educational and professional purposes,...
4.2.4.- KONTROL KNX / EIB CERDAS
AEL-KNX-BC
Aplikasi Pelatihan Kontrol Tirai dengan KNX
The AEL-KNX-BC is an application designed to facilitate the study and understanding of KNX based blind control systems. This unit serves as a valuable resource for educational and professional purposes, providing hands-on experience and knowledge...
4.2.4.- KONTROL KNX / EIB CERDAS
AEL-KNX-BMS
Aplikasi Pelatihan Pengendalian Bangunan melalui BMS
The AEL-KNX- is a device designed to provide knowledge and experience in KNX programming practices specifically tailored for building management systems (BMS). This unit serves as a valuable resource for educational and professional institutions...
4.2.5.- KNX / EIB HOME / BANGUNAN OTOMASI
AEL-BCS
Aplikasi BACnet untuk Pengendalian Jaringan dan Otomasi Bangunan
The Building Automation and Control Networks BacNet Application, "AEL-BCS", is conceived in such a way to integrate cognitive and hands-on training into an overall concept linking together theory and practice and thus allowing specific targeting...