Лидеры продаж

Показано 181-210 из 921

RAINFALL SIMULATOR FOR SOIL EROSION STUDIES - RSES

RSES

Available

13.1.- ГИДРОЛОГИЯ И ГИДРОГЕОЛОГИЯ

RSES

Моделлер дождя для исследований эрозии почвы

The Rainfall Simulator for Soil Erosion Studies, "RSES", consists of a metal frame that can be placed directly on the ground for direct field studies or used with its various accessories for laboratory tests. The whole structure is covered with a...

COMPUTER CONTROLLED RAINFALL SIMULATOR FOR SOIL EROSION STUDIES - RSESC

RSESC

Available

13.1.- ГИДРОЛОГИЯ И ГИДРОГЕОЛОГИЯ

RSESC

Моделлер дождя для исследований эрозии почвы, управляемый с компьютера (ПК)

The Computer Controlled Rainfall Simulator for Soil Erosion Studies, "RSESC", consists of a metal frame that can be placed directly on the ground for direct studies or used with its different accessories for laboratory tests.The entire frame is...

Available

13.1.- ГИДРОЛОГИЯ И ГИДРОГЕОЛОГИЯ

RFS

Моделлер потока рек

The River Flow Simulator, "RFS", designed by EDIBON, allows the simulation and study of the river features, included the flow and solid bed load motion.The main element is a rectangular tank made of stainless steel supported on a metal beam frame,...

COMPUTER CONTROLLED GENERATING STATIONS CONTROL AND REGULATION SIMULATOR - SCE

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

SCE

Моделлер регулирования и контроля электростанций, управляемый с компьютера (ПК)

Unit designed to simulate the regulation behaviour of a hydroelectric generating station, as a didactic application with different aspects ofregulation, control and simulation.It is possible to work with this unit in 2 ways:REAL mode (continuous...

Аксессуар HTMC

Available

8.7.3.- ТУРБИНЫ

HT-FR

Модель радиально-поточной турбины

Аксессуар HTMC

Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...

Аксессуар HTMC

Available

8.7.3.- ТУРБИНЫ

HT-K

Модель турбины Каплана

Аксессуар HTMC

Аксессуар HTMC

Available

8.7.3.- ТУРБИНЫ

HT-P

Модель турбины Пельтона

Аксессуар HTMC

Аксессуар HTMC

Available

8.7.3.- ТУРБИНЫ

HT-F

Модель турбины Френсиса

Аксессуар HTMC

ANALOG/DIGITAL CONVERTERS MODULE - N-M60

N-M60

Available

2.3.3.- ЦИФРОВАЯ ЭЛЕКТРОНИКА

N-M60

Модуль аналогово-цифровых преобразователей

Most of the "information" generated in the world by various physical phenomena has a strong analogical character. This means that the information undergoes a continuous variation within certain limits determined over time. Of course, there is also...

VIBRATIONS AND/OR DEFORMATIONS TEST MODULE - BS1

Аксессуар BS

Available

6.1.2.1.- ДАТЧИКИ И ЭЛЕКТРОННЫЕ ПРИБОРЫ

BS1

Модуль вибрационных и/или деформационных испытаний

Аксессуар BS

Vibrations and/or Deformations Test Module, "BS1" has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one...

FME34

Available

8.1.2.- ИЗМЕРЕНИЕ

FME34

Модуль гидростатики и измерения давления

The Fluid Statics and Manometry, "FME34", designed by EDIBON, allows the study of static fluids and manometry providing the user with an introduction in the behavior of liquids under hydrostatic conditions (fluids at standstill) and the...

Аксессуар BS

Available

6.1.2.1.- ДАТЧИКИ И ЭЛЕКТРОННЫЕ ПРИБОРЫ

BS8

Модуль испытаний близости

Аксессуар BS

The Proximity Test Module, "BS8", has been designed to teach techniques to detect the proximity of objects, focusing on the distance at which each sensor is able to detect the object and the type of material it can detect. In the upper part there...

Аксессуар BS

Available

6.1.2.1.- ДАТЧИКИ И ЭЛЕКТРОННЫЕ ПРИБОРЫ

BS3

Модуль испытаний давления

Аксессуар BS

The Pressure Test Module, "BS3", has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques. On the left upper side of the module there is a pressure...

Аксессуар BS-PLC

Available

6.2.3.- ИЗМЕРИТЕЛЬНЫЕ ПРИБОРЫ И КОНТРОЛЬ С ПЛК

BS3-PLC

Модуль испытаний давления для ПЛК

Аксессуар BS-PLC

The "BS3-PLC" has been designed to study the pressure measurement techniques and control application with a PLC. This unit is equipped with a pressure chamber with several sensors, with different uses and applications, adjusted to measure the...

Аксессуар BS

Available

6.1.2.1.- ДАТЧИКИ И ЭЛЕКТРОННЫЕ ПРИБОРЫ

BS10

Модуль испытаний освещения

Аксессуар BS

The objective of the Light Test Module, "BS10", is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage...

Аксессуар BS-PLC

Available

6.2.3.- ИЗМЕРИТЕЛЬНЫЕ ПРИБОРЫ И КОНТРОЛЬ С ПЛК

BS10-PLC

Модуль испытаний освещения для ПЛК

Аксессуар BS-PLC

The "BS10-PLC" has been designed to study different light measurement techniques and control light intensity through a PLC. This unit is composed of a lamp whose intensity can be controlled according to the voltage applied and a series of...

Аксессуар BS

Available

6.1.2.1.- ДАТЧИКИ И ЭЛЕКТРОННЫЕ ПРИБОРЫ

BS9

Модуль испытаний пневматики

Аксессуар BS

The Pneumatics Test Module, "BS9", has been designed to teach techniques of control and handling of a pneumatic piston.All connections of the different BS9 mechanisms will have output through a group of 2 mm. terminals. They are placed in the...

Аксессуар BS-PLC

Available

6.2.3.- ИЗМЕРИТЕЛЬНЫЕ ПРИБОРЫ И КОНТРОЛЬ С ПЛК

BS9-PLC

Модуль испытаний пневматики для ПЛК

Аксессуар BS-PLC

The "BS9-PLC" has been designed to study the control and handling techniques of a pneumatic actuator through a PLC. The actuator is a double acting pneumatic cylinder that allows moving a platform. The displacement of the piston axle is detected...

Аксессуар BS

Available

6.1.2.1.- ДАТЧИКИ И ЭЛЕКТРОННЫЕ ПРИБОРЫ

BS4

Модуль испытаний расхода

Аксессуар BS

The objective of Flow Test Module, "BS4", is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank,...

Аксессуар BS-PLC

Available

6.2.3.- ИЗМЕРИТЕЛЬНЫЕ ПРИБОРЫ И КОНТРОЛЬ С ПЛК

BS4-PLC

Модуль испытаний расхода для ПЛК

Аксессуар BS-PLC

The "BS4-PLC" has been designed to study the flow measurement techniques and control with PLC. This unit is unit with two tanks assembled on a structure with a pumping system that allows pumping the water from the reservoir tank, through the...

Аксессуар BS

Available

6.1.2.1.- ДАТЧИКИ И ЭЛЕКТРОННЫЕ ПРИБОРЫ

BS7

Модуль испытаний тахометра

Аксессуар BS

The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...

Аксессуар BS

Available

6.1.2.1.- ДАТЧИКИ И ЭЛЕКТРОННЫЕ ПРИБОРЫ

BS2

Модуль испытаний температуры

Аксессуар BS

The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....

Аксессуар BS

Available

6.1.2.1.- ДАТЧИКИ И ЭЛЕКТРОННЫЕ ПРИБОРЫ

BS6

Модуль испытаний уровня жидкости

Аксессуар BS

The Liquid level Test Module, "BS6", has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...

N-M7

Available

14.2.1.2.- АНАЛОГОВАЯ ЭЛЕКТРОНИКА

N-M7

Модуль операционных усилителей

Operational amplifiers are compact, active, linear and high-gain devices designed to provide the desired transfer function. An operational amplifier consists of an electronic circuit having two inputs and one output. The output is the difference...

Аксессуар MEMT

Available

7.1.5.- ТРИБОЛОГИЯ (ТРЕНИЕ, ИЗНОС, СМАЗКА)

MEMT-5

Модуль Оптической Эластогидродинамики

Аксессуар MEMT

This unit allows to investigate the thickness and characteristics of a lubricant film on a rolling sphere.The unit consists in a steel sphere and a driven glass disc.The sphere is pressed against the underside of the glass disc. The light from a...

N-M14

Available

14.2.1.4.- ПОЛУПРОВОДНИКИ

N-M14

Модуль оптоэлектроники

Optoelectronics is the link between optical systems and electronic systems. Optoelectronic components are those whose operation is directly related to light.They are semiconductor devices capable of producing light radiation within the human...

DIGITAL ELECTRONICS FUNDAMENTALS MODULE - N-M11

N-M11

Available

14.2.1.3.- ЦИФРОВАЯ ЭЛЕКТРОНИКА

N-M11

Модуль основ цифровой электроники

Digital systems are systems for processing, treatment or transmission of information, in which such information is limited to take values in a discrete set. These signals (whose magnitude can only take one value from a discrete set of values) are...

BASIC COMBINATIONAL CIRCUITS MODULE - N-M12

N-M12

Available

14.2.1.3.- ЦИФРОВАЯ ЭЛЕКТРОНИКА

N-M12

Модуль основных комбинаторных цепей

A combinational circuit is an electronic circuit in which the value of its outputs at a given instant, depends on the value of the inputs at the same instant. In other words, it is a circuit that has no memory. Combinational circuits work with...

BASIC SEQUENTIAL CIRCUITS MODULE - N-M13

N-M13

Available

14.2.1.3.- ЦИФРОВАЯ ЭЛЕКТРОНИКА

N-M13

Модуль основных последовательных цепей

Logic gates and the circuits created with them constitute combinational logic, so called because the output only depends on the combination of the input variables present.There is a second group of logic circuits called sequential logic, so called...

N-M6

Available

14.2.1.2.- АНАЛОГОВАЯ ЭЛЕКТРОНИКА

N-M6

Модуль осциляторов

Oscillators operation is usually very similar in all of them: the oscillating circuit produces an oscillation, then the amplifier increases it and finally the feedback network takes a part of the energy from the oscillating circuit and introduces...

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ