The Axial Fan Teaching Unit, "HVAB", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a variable speed centrifugal fan, which is measured through a speed sensor, and a...

With the Axial Turbine, "FME27", designed by EDIBON, it is possible to study and to understand the axial flow turbines which, unlike the radial flow turbines, the working fluid is parallel to the axis of rotation.This unit consists of an axial...

The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...

This unit is common for Heat Exchangers type "TI" and can work with one or several exchangers.This unit performs the following tasks:Heating water in a computer controlled thermostatic bath.Pumping the hot water.Regulation and measurement of the...

This unit is self-complete, it includes hardware, power supply and the necessary connections for supplying power and allocating the available modules.

A combinational circuit is an electronic circuit in which the value of its outputs at a given instant, depends on the value of the inputs at the same instant. In other words, it is a circuit that has no memory. Combinational circuits work with...

The purpose of Electronics and Electricity Assembly Kits (M-KITS) is to provide the students with the necessary elements for creating their own circuits.

We present a flexible and modular-based system for learning basic electronics, basic electricity and circuit theory. The advantage given by this learning and teaching system is that the student establishes his own rhythm, thus rendering...

Hydraulics is the branch of science that deals with the mechanical properties of fluids, and Fluid Mechanics provides the foundation for hydraulics.With LIFLUBA (Basic Fluids Mechanics Integrated Laboratory), EDIBON tries to give answer to the...

The Basic Hydraulic Feed System, "FME00/B", designed by EDIBON is a service unit for different Fluid Mechanics Units as: "FME" type modules, Fluid Friction in Pipes Unit "AFT", etc., increasing the equipment profitability.

The Integrated Basic Mechanics Laboratory, "LIMEBA," designed by EDIBON, allows for the construction of various experiments on the base panel, where length measurements are possible thanks to the distance between the centers of the perforations...

The Basic Pipe Network Unit, "FME23", designed by EDIBON, allows the study of pressures and flows created by interconnected pipes, i.e. in a network.The objective of this unit is to simulate the problems that could originate in pipe networks, with...

Logic gates and the circuits created with them constitute combinational logic, so called because the output only depends on the combination of the input variables present.There is a second group of logic circuits called sequential logic, so called...

The Basic Teaching Unit for the Study of Regulation and Control, "RYC/B", allows the user to learn the basics about regulation and control of first and second order systems.This unit enables to carry a set of practices related with basic...

The Basic Unit of Mechanical Drive Systems, "MDSU", consists of a main frame where a series of accessories and elements are arranged, distributed in modules of different level, thought to introduce the user in the field of mechanical systems and...

The Batch Distillation Unit, "UDDB", is basically composed by a boiler on which different types of interchangeable columns can be adapted (plate columns and Raschig Rings column). An eight plate column, a reflux system and a tank for the...

The Batch Reactor for QR, "QRD", designed by EDIBON, enables the study and kinetic analysis of homogeneous liquid-liquid reactions, as well as the demonstration of adiabatic and isothermal reactions.This unit offers a wide range of opportunities...

The purpose of this application is to demonstrate the importance of energy storage in isolated environments. There are cases in which due to the absence of wind or photovoltaic energy we have no other option than to resort to the storage of...

The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...

Didactic case for the study of foundry fundamentals.Introduction to sand casting: student experiments with three different patterns (bell, anvil and anchor).Operations of ramming up of the moulding sand, melting of the metal, pouring, forming and...

The Belt Friction Unit, "MCF", allows us to carry out studies and investigations to compare the driving torque for a given degree of overlap of a flat belt (leather or rope) and a V belt.With this unit the relationship between the tensions in the...

The Belt Friction Unit with Dynamometers, "MCF/A", allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.With this unit it is possible to observe the relationship between...

The Bench Top Cooling Tower, "TTEB", includes a pump that impels hot water from the tank (with level switch and heating element) to the manifolds located at the top of the cooling tower. Water flow can be adjusted by a manual needle valve.A...

The Bernoulli's Theorem Demonstration unit, "FME03", designed by EDIBON is mainly composed of a circular section pipe with the shape of a truncated cone, transparent and with seven pressure taps that allows to measure, simultaneously, the static...

The process carried out by the Biodiesel Process Unit, "EBDB", consists on transforming the fatty acids contained in vegetable oils into a high energy content biofuel.Basically, the process consists of two well-defined stages:Stage I: Mixing the...

The Bioethanol Process Unit (EBEB) has been designed to study and control the bioethanol production process on a laboratory scale. This unit allows to monitor and examine all the important processes, from liquefaction and saccharification of the...

The Biogas Process Unit, "EBGB", is supplied with two packed anaerobic digesters. In this way, the user can work either in only one stage or in two stages, separating the different phases of the digestion process (the processes of hydrolysis,...

The main element of the unit is the biomass boiler, which will heat the water that will flow through the other components transferring its heat.The boiler is a biomass boiler of 16 kW that works with pellet and other granulated fuels. The body of...

The Bluetooth Unit, "EBL", operates in conjunction with a computer, which is connected with the Bluetooth Dongle, that allows communicating and programming the Bluetooth Devices to perform a simple Bluetooth network.The two Bluetooth Devices...

Bomb Calorimeter, "TBCF", comprises the calorimeter, a calorimeter vessel, an outer double walled water jacket, control unit to switch on/off the stirrer and the ignition device, an accurate thermometer and charging unit with pressure gauges to...

The main distinguishing element of automatic transmissions is its group of epicyclic gearing.The gear assembly of the "MBW" unit consists of:Two sun gears, one to transfer forward gear ratios and one reverse gear.Two sets of planet gears: long and...

The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...