7.- MEKANIKA

Mekanika adalah disiplin ilmu yang mempelajari fenomena fisik yang mempengaruhi unsur-unsur alam. Meski disebut mekanika, sebenarnya ia mencakup mekanika klasik dan kuantum, yang merupakan dua pilar fundamental fisika modern.

Lihat Lebih Banyak

Mekanika klasik berhubungan dengan studi tentang benda kaku serta sistem bilangan terbatas atau tak terbatas (media berkelanjutan) dari derajat kebebasan, sementara mekanika kuantum mempelajari sistem skala kecil atau energi.

Seperti dalam sains eksperimental , setiap studi mekanis suatu benda melibatkan proses analisis, dari proses fisik dan perspektif matematika, dan eksperimen. Namun, tidak seperti disiplin ilmu lainnya, dalam mekanika tidaklah begitu rumit untuk mempelajari perilaku teoretis yang ditafsirkan dalam sistem nyata.

Terima kasih atas kontribusi banyak ilmuwan, seperti Newton, Lagrange, Hamilton atau Schrödinger, beberapa hukum fundamental atau prinsip mekanika dapat ditetapkan:

Hukum Newton.
Prinsip kekekalan momentum.
Prinsip kekekalan energi.
Prinsip kekekalan momentum sudut (atau kinetik) dan persamaan dasar dinamika rotasi.

Mengingat perluasan bidang studinya, lebih mudah untuk menyebutkan bidang yang paling representatif:

Teknik.
Statika.
Dynamics.
Mekanika fluida.
Termodinamika dan perpindahan panas.
Ilmu, elastisitas, dan kekuatan bahan.
Analisis numerik (metode elemen hingga).

Karena evolusi yang konstan dari industri, cabang dari teknik mesin, teknik otomotif dan mobil, perhitungan struktur, pengembangan mesin, serta pemasangan dan pemeliharaannya, adalah yang paling berkembang saat ini.

Lihat Produk

Materi Terkait

MEKANIKA SUBKATEGORI

7.1.- TEKNIK MESIN

Rekayasa mekanik terdiri dari penerapan fisika pada elemen-elemen di sekitar kita untuk memperbaiki perangkat mekanik yang ada atau menciptakan yang baru.Karena didasarkan pada prinsip-prinsip fisik, asal-usulnya berasal dari awal prinsip-prinsip tersebut dan perkembangannya sangat terkait dengan...

lihat

7.2.- TEKNIK MEKANIK OTOMOTIF

Industri otomotif adalah salah satu aplikasi utama teknik mesin saat ini. Kendaraan dengan mesin pembakaran dalam bensin dianggap yang terbesar Penemuan dari abad ke-20, meskipun prototipe pertama sudah dibuat pada akhir abad ke-18. Prototipe pertama berasal dari tahun 1769. Itu adalah kereta...

lihat

7.3.- TEKNIK MATERIAL

Teknik material adalah cabang ilmiah dan industri yang bertanggung jawab untuk membuat interpretasi industri dari ilmu material. Secara antropologis, berbagai tahapan manusia pengembangan telah diklasifikasikan menurut bahan yang digunakan dalam pembuatan alat (Zaman Batu, Zaman Perunggu, dll.)....

lihat

7.4.- PEMASANGAN DAN PEMELIHARAAN

Kebutuhan masyarakat saat ini adalah tantangan bagi industri apa pun, karena mereka harus terus melakukan evolusi dan pembaruan untuk beradaptasi dengan kebutuhan tersebut.Dalam beberapa tahun terakhir, sebagai akibat dari revolusi industri atau Industri 4.0 baru, munculnya Industrial Internet of...

lihat

7.1.- TEKNIK MESIN 7.2.- TEKNIK MEKANIK OTOMOTIF 7.3.- TEKNIK MATERIAL 7.4.- PEMASANGAN DAN PEMELIHARAAN

MEKANIKA PERALATAN

Menampilkan 73 -108 dari 176 produk

UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG

MFPG

Available

7.1.6.- MEKANIKA STRUKTURAL

MFPG

Peralatan Studi Gaya pada Lengan Crane

The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...

Available

7.1.6.- MEKANIKA STRUKTURAL

MVS

Peralatan Jembatan Gantung

The Suspension Bridge Unit, "MVS", has been meticulously designed by EDIBON to explore the dynamics of stresses in a suspension bridge system. This unit simulates a suspension bridge using a deck and two parallel main cables, allowing students to...

MARP

Available

7.1.6.- MEKANIKA STRUKTURAL

MARP

Peralatan Busur Parabola

The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...

MART

Available

7.1.6.- MEKANIKA STRUKTURAL

MART

Peralatan Busur Tiga Titik Artikulasi

The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...

UNIT FOR STUDYING FORCES IN A SIMPLE BAR STRUCTURE - MFBS

MFBS

Available

7.1.6.- MEKANIKA STRUKTURAL

MFBS

Peralatan untuk Studi Gaya pada Struktur Batang Sederhana (Rangka Sederhana)

The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...

UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1

MFCS1

Available

7.1.6.- MEKANIKA STRUKTURAL

MFCS1

Peralatan Studi Gaya pada Berbagai Konfigurasi Rangka Bidang

The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", designed by EDIBON, allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the...

UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2

MFCS2

Available

7.1.6.- MEKANIKA STRUKTURAL

MFCS2

Peralatan Studi Gaya pada Rangka Hiperstatik

The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", designed by EDIBON, allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in...

UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3

MFCS3

Available

7.1.6.- MEKANIKA STRUKTURAL

MFCS3

Peralatan untuk Studi Deformasi pada Rangka

The Unit for studying Deformation of Trusses, "MFCS3", designed by EDIBON, allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the...

Available

7.1.6.- MEKANIKA STRUKTURAL

MFL

Peralatan Busur Dua Titik Artikulasi

The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...

Available

7.1.6.- MEKANIKA STRUKTURAL

MPO

Peralatan Portal

The Portal Frame Unit, "MPO", designed by EDIBON, allows for precise measurements of vertical and horizontal deflection in an embedded rectangular portal frame. By applying various loads with specific weights, changes in the portal frame’s...

Available

7.1.6.- MEKANIKA STRUKTURAL

STH

Peralatan Hipotesis Tegangan

The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...

SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE

MEPE

Available

7.1.6.- MEKANIKA STRUKTURAL

MEPE

Peralatan untuk Studi Masalah Stabilitas

The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...

UNIT FOR STUDYING METHODS TO DETERMINE THE ELASTIC LINE - MDLE

MDLE

Available

7.1.6.- MEKANIKA STRUKTURAL

MDLE

Peralatan Studi Metode untuk Menentukan Garis Elastis

The Unit for studying Methods to Determine the Elastic Line, "MDLE", consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys, dial gauges and a set...

UNIT TO STUDY STRESS ON A MEMBRANE - SSM

Available

7.1.6.- MEKANIKA STRUKTURAL

SSM

Peralatan untuk Studi Tegangan pada Membran

The Unit to Study Stress on a Membrane, "SSM", designed by EDIBON, allows the study of stresses and deformations in a thin disc or membrane subjected to different compressive stresses.The main element of the equipment is a thin disc or membrane...

Available

7.1.6.- MEKANIKA STRUKTURAL

MVV

Peralatan Balok Kantilever

The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...

Available

7.3.2.1.- UJI MEKANIK

MDB

Peralatan Defleksi pada Batang Melengkung

The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...

Available

7.3.2.1.- UJI MEKANIK

MFV

Demonstrator Lenturan Balok

The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...

MFLT

Available

7.3.2.1.- UJI MEKANIK

MFLT

Peralatan Tekuk pada Batang

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...

EEICI/300

Available

7.3.2.1.- UJI MEKANIK

EEICI/300

Peralatan Uji Dampak Charpy dan Izod 300Nm

The 300 Nm Charpy and Izod Impact Testing Unit, "EEICI/300", designed by EDIBON, consists of a pendulum supported by bearings with a 900 mm long arm and a clamping system at the starting position of the test. At one end of the pendulum, either the...

Available

7.3.2.1.- UJI MEKANIK

MUP

Peralatan Universal untuk Tekuk

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...

SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF

Available

7.3.2.1.- UJI MEKANIK

MMF

Peralatan Momen Lentur dan Gaya Geser

The Shear Force and Bending Momentum Unit, "MMF", designed by EDIBON, is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the...

Available

7.2.1.- BRAKES AND CLUTCHES

MFT

Peralatan Rem Drum

The Drum Brake Unit, "MFT", allows the study of the forces acting on a drum brake, the difference between the braking torque of the primary shoe and secondary shoe braking systems and determining the coefficient of friction between the drum and...

Available

7.2.1.- BRAKES AND CLUTCHES

MFD

Peralatan Rem Cakram

The Disc Brake Unit, "MFD", has been designed by EDIBON to carry out experiments to investigate the relationship between the normal force acting on the brake pads, the effective radius of the brake pads and the braking torque.The brake pads are...

BRAKING AND ACCELERATING FORCES UNIT - MFF

Available

7.2.1.- BRAKES AND CLUTCHES

MFF

Peralatan Gaya Pengereman dan Percepatan

With the Braking and Accelerating Forces Unit, "MFF", designed by EDIBON, practices and experiments can be carried out to study the relationship between the forces involved in the braking and acceleration of a vehicle. It also allows demonstrating...

Available

7.2.1.- BRAKES AND CLUTCHES

MEM

Peralatan Kopling

The Plate Clutch, "MEM", allows to demonstrate the influence of the friction surface and the applied pressure of the springs on the transmitted torque for a friction clutch. To this end, several clutch discs with different diameters and...

Available

7.2.1.- BRAKES AND CLUTCHES

MSH

Peralatan Hidraulik Sederhana

The Simple Hydraulic Unit, "MSH", has been designed for studies related to mechanical engineering and motor vehicles. It is used to demonstrate how a liquid can be used to transmit a force.The unit can also be used to conduct experiments to study...

Available

7.2.2.- GEARS, DIFERENSIAL, DAN TRANSMISI

MCC

Kotak Transmisi Mobil

The Gearbox unit, "MCC", has been designed to represent the typical position of a simple gearbox with three gears ratio and reverse.Basically, the gearbox consists of several gears of different size that can be meshed as required. Those gears are...

MTE1

Available

7.2.2.- GEARS, DIFERENSIAL, DAN TRANSMISI

MTE1

Peralatan Transmisi Epikloidal (1 Elemen)

The Epicyclic Gear Unit (1 element), "MTE1", includes a set of epicyclic gears that allows the student to study different reduction ratios (direct drive and overdrive), as well as torque conversion.A simple epicyclic gears set consists of:Sun gear...

MTE2

Available

7.2.2.- GEARS, DIFERENSIAL, DAN TRANSMISI

MTE2

Peralatan Transmisi Epikloidal (2 Elemen)

The Epicyclic Gear Unit (2 elements), "MTE2", consists of two coupled epicyclic gears sets. It will allow the students to carry out experiments of different gear ratios, as well as the torque conversions.The epicyclic gears installed in the...

MTE3

Available

7.2.2.- GEARS, DIFERENSIAL, DAN TRANSMISI

MTE3

Peralatan Transmisi Epikloidal (3 Elemen)

The Epicyclic Gear Unit (3 elements), "MTE3", designed by EDIBON, consists of three coupled epicyclic gears sets. It will allow the students to carry out experiments of different gear ratios, as well as the torque conversions.The epicyclic gears...

BORG-WARNER AUTOMATIC TRANSMISSION - MBW

Available

7.2.2.- GEARS, DIFERENSIAL, DAN TRANSMISI

MBW

Transmisi Otomatis BorgWarner

The main distinguishing element of automatic transmissions is its group of epicyclic gearing.The gear assembly of the "MBW" unit consists of:Two sun gears, one to transfer forward gear ratios and one reverse gear.Two sets of planet gears: long and...

DIFFERENTIAL-CROWNWHEEL AND PINION - MDC

Available

7.2.2.- GEARS, DIFERENSIAL, DAN TRANSMISI

MDC

Diferensial Mobil. Mahkota Gigi dan Pinion

The Differential-Crownwheel and Pinion, "MDC", designed by EDIBON, simulates a differential mechanism. The function of the differential mechanism is to enable the drive wheels rotate at different speeds, regardless of whether they are the front or...

Available

7.2.2.- GEARS, DIFERENSIAL, DAN TRANSMISI

MEC

Peralatan untuk Studi Overdrive

The Overdrive Unit, "MEC", includes a set of epicyclical gears that represent an application of a simple epicyclic arrangement of the type used in a motor vehicle overdrive.Simple epicyclic set consists of:Sun gear that rotates together with the...

COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER ENGINES, 2.2 KW - TBMC3

TBMC3

Available

7.2.3.- MESIN

TBMC3

Bangku Uji Motor 2,2 kW, Dikendalikan dari Komputer (PC)

The Computer Controlled Test Bench for Single-Cylinder Engines, 2.2 kW, "TBMC3", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 2.2 kW.The unit has an element to exert the braking torque, an asynchronous motor...

COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER ENGINES, 7.5 KW - TBMC8

TBMC8

Available

7.2.3.- MESIN

TBMC8

Bangku Uji Motor 7,5 kW, Dikendalikan dari Komputer (PC)

The Computer Controlled Test Bench for Single-Cylinder Engines, 7.5 kW, "TBMC8", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 7.5 kW.The element of the unit that offers load torque is an eddy current...

COMPUTER CONTROLLED TEST BENCH FOR SINGLE-CYLINDER AND TWO-CYLINDERS ENGINES, 11 KW - TBMC12

TBMC12

Available

7.2.3.- MESIN

TBMC12

Bangku Uji Motor 11 kW, Dikendalikan dari Komputer (PC)

The Computer Controlled Test Bench for Single-Cylinder and Two-Cylinders Engines, 11 kW, "TBMC12", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 11 kW.The element of the unit that offers load torque is an eddy...

UNTUK INFORMASI LEBIH LANJUT, HUBUNGI KAMI