6.2.5.- РАБОЧЕЕ МЕСТО С ПЛК

ПРОДУКТЫ РАБОЧЕЕ МЕСТО С ПЛК
Показано 31-43 из 43
PNEUMATIC HANDLING AND CONVEYOR BELT - AE-PLC-MACT
  • AE-PLC-MACT
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-MACT
Пневматическая транспортировка и ленточный конвейер
The "AE-PLC-MACT" is an automatic handling station with conveyor system commanded by a PLC. The "AE-PLC-MACT" is composed by one pneumatic handling system that use vacuum technology to move the pieces from the input piece area to the conveyor...
QUALITY CONTROL WORKSTATION - AE-PLC-VS
  • AE-PLC-VS
Available
6.2.5.6.- РАБОЧЕЕ МЕСТО ДЛЯ ИДЕНТИФИКАЦИИ ФРАГМЕНТОВ ПРИЛОЖЕНИЙ
AE-PLC-VS
Станция контроля качества
The "AE-PLC-VS" is a quality control system commanded by a PLC. The "AE-PLC-VS" is equipped with a color camera that identifies the pieces on a conveyor belt. Depending on different specification, the system separates the corresponding pieces...
SORTING WORKSTATION - AE-PLC-CF
  • AE-PLC-CF
Available
6.2.5.6.- РАБОЧЕЕ МЕСТО ДЛЯ ИДЕНТИФИКАЦИИ ФРАГМЕНТОВ ПРИЛОЖЕНИЙ
AE-PLC-CF
Сортировочная станция
The "AE-PLC-CF" is a sorting workstation commanded by a PLC, which identifies the color and the type of the material of the input pieces and classifies them into three different places. The "AE-PLC-CF" workstation is designed as a modular system...
BALL SELECTION WORKSTATION - AE-PLC-SLB
  • AE-PLC-SLB
Available
6.2.5.6.- РАБОЧЕЕ МЕСТО ДЛЯ ИДЕНТИФИКАЦИИ ФРАГМЕНТОВ ПРИЛОЖЕНИЙ
AE-PLC-SLB
Станция выбора мячей
The "AE-PLC- SLB" is a ball selection system commanded by a PLC. The workstation detects the balls that arrive to the collect position and, depending on the color and material, a cylinder carries the balls to the correct container. The system is...
RFID IDENTIFICATION WORKSTATION - AE-PLC-RFID
  • AE-PLC-RFID
Available
6.2.5.6.- РАБОЧЕЕ МЕСТО ДЛЯ ИДЕНТИФИКАЦИИ ФРАГМЕНТОВ ПРИЛОЖЕНИЙ
AE-PLC-RFID
Станция радиочастотной идентификации
The "AE-PLC-RFID" is a workstation with RFID identification system. The workstation can write, read and rewrite information in the pieces using the RFID technology. The "AE-PLC-RFID" includes a conveyor system to transport the incoming piece to...
DEFECTIVE PIECES SORTER WORKSTATION APPLICATION - AE-PLC-CPD
  • AE-PLC-CPD
Available
6.2.5.6.- РАБОЧЕЕ МЕСТО ДЛЯ ИДЕНТИФИКАЦИИ ФРАГМЕНТОВ ПРИЛОЖЕНИЙ
AE-PLC-CPD
Установка по отбраковке дефектных элементов
The "AE-PLC-CPD" is a Defective Pieces Sorter Workstation Application commanded by a PLC, which measures the deepness of the hole in the pieces. If the hole has not the correct deepness, the workstation sends the defective pieces to a rejection...
STORAGE WORKSTATION - AE-PLC-AL
  • AE-PLC-AL
Available
6.2.5.8.- РАБОЧЕЕ МЕСТО ДЛЯ ХРАНЕНИЯ ПРИЛОЖЕНИЙ
AE-PLC-AL
Станция хранения
The "AE-PLC-AL" is an automatic Storage Workstation commanded by a PLC that moves the pieces at the desired position in a numbered grid.The "AE-PLC-AL" uses two electric linear actuators and a pneumatic manipulator to configure an automatic three...
Запросить информацию