6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ

ПРОДУКТЫ РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
Показано 1-8 из 8
PIECES MANIPULATOR WORKSTATION - AE-PLC-MPS
  • AE-PLC-MPS
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-MPS
Станция раздачи кусков
The "AE-PLC-MPS", Pieces Manipulator Workstation, is a unit that works with pneumatics, electro-pneumatics and vacuum technologies.The "AE-PLC-MPS" performs the following operation: moving a piece from one position to another by using suction pads...
POSITIONING WORKSTATION - AE-PLC-SPO
  • AE-PLC-SPO
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-SPO
Станция позиционирования
The "AE-PLC-SPO" is a positioning workstation commanded by a PLC that checks the material and dimensions of the incoming pieces to sorting in three different places. The "AE-PLC-SPO" uses a three axis manipulator to pick and place the incoming...
ELECTRICAL HANDLING WORKSTATION - AE-PLC-MAE
  • AE-PLC-MAE
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-MAE
Рабочая станция для электромонтажных работ
The "AE-PLC-MAE" is an electrical handling system commanded by a PLC. The "AE-PLC-MAE" is composed of a two axis electrical manipulator with a pneumatic gripper to transport the pieces from the input pieces holder to the corresponding position,...
PNEUMATIC HANDLING WORKSTATION - AE-PLC-MAN
  • AE-PLC-MAN
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-MAN
Рабочая станция для монтажа воздуховода
The "AE-PLC-MAN" is a pneumatic handling workstation commanded by a PLC, which performs handling and sorting functions.The workstation identify the color of the input pieces at the input pieces area, once the color is identified, the station take...
AC CONVEYOR BELT WORKSTATION - AE-PLC-CTCA
  • AE-PLC-CTCA
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-CTCA
Ленточный конвейер с двигателем переменного тока
The "AE-PLC-CTCA" is an AC powered conveyor system commanded by a PLC. The "AE-PLC-CTCA" is composed by a conveyor, 4 position sensors to stop the conveyor at different positions, motor positioner, AC motor driver and three-phased motor to a...
CC CONVEYOR BELT WORKSTATION - AE-PLC-CTCC
  • AE-PLC-CTCC
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-CTCC
Ленточный конвейер с двигателем постоянного тока
The "AE-PLC-CTCC" is a DC powered conveyor system commanded by a PLC. The "AE-PLC-CTCC" is composed by a conveyor, 4 position sensors to stop the conveyor at different positions, motor positioner, DC motor driver and DC motor to a complete control...
PNEUMATIC HANDLING AND CONVEYOR BELT - AE-PLC-MACT
  • AE-PLC-MACT
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-MACT
Пневматическая транспортировка и ленточный конвейер
The "AE-PLC-MACT" is an automatic handling station with conveyor system commanded by a PLC. The "AE-PLC-MACT" is composed by one pneumatic handling system that use vacuum technology to move the pieces from the input piece area to the conveyor...
Запросить информацию