6.2.5.- РАБОЧЕЕ МЕСТО С ПЛК

ПРОДУКТЫ РАБОЧЕЕ МЕСТО С ПЛК
Показано 1-30 из 43
PIECES FEEDER WORKSTATION - AE-PLC-APS
  • AE-PLC-APS
Available
6.2.5.1.- РАБОЧЕЕ МЕСТО ДЛЯ ЗАГРУЗКИ ФРАГМЕНТОВ ПРИЛОЖЕНИЙ
AE-PLC-APS
Станция нарезки на куски
The Pieces Feeder Workstation, "AE-PLC-APS", is a unit that works with pneumatics and electro-pneumatics technologies.The function of the "AE-PLC-APS" is to supply pieces and to verify them, if they are acceptable.The pieces will be supplied one...
FEEDING WORKSTATION FOR PIECES - AE-PLC-A
  • AE-PLC-A
Available
6.2.5.1.- РАБОЧЕЕ МЕСТО ДЛЯ ЗАГРУЗКИ ФРАГМЕНТОВ ПРИЛОЖЕНИЙ
AE-PLC-A
Станция подачи кусков
The "AE-PLC-A" is a feeder workstation commanded by a PLC that provides pieces to the system. The "AE-PLC-A" keeps the pieces in a vertical storage, the workstation take the pieces one by one and place at the quality control zone. The system...
MOUNTING WORKSTATION - AE-PLC-M
  • AE-PLC-M
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ
AE-PLC-M
Станция монтажа
The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...
BOTTLING WORKSTATION - AE-PLC-MEMB
  • AE-PLC-MEMB
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ
AE-PLC-MEMB
Бутылочная станция
The "AE-PLC-MEMB" is a bottling workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-MEMB" transport the input bottles, to the filling area. In this zone, the "AE-PLC-MEMB" fills...
DRILLING WORKSTATION - AE-PLC-ST
  • AE-PLC-ST
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ
AE-PLC-ST
Сверлильная станция
The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...
MOLDING WORKSTATION - AE-PLC-SMOLD
  • AE-PLC-SMOLD
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ
AE-PLC-SMOLD
Формовочная станция
The "AE-PLC-SMOLD" is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a molding process by punching the piece with...
CUTTING WORKSTATION - AE-PLC-SCOR
  • AE-PLC-SCOR
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ
AE-PLC-SCOR
Отрезная станция
The "AE-PLC-SCOR" is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine simulate the process.The "AE-PLC-SCOR"...
FILTRATION WORKSTATION - AE-PLC-FT
  • AE-PLC-FT
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ
AE-PLC-FT
Станция фильтрации
The "AE-PLC-FT" is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the filter using a pump and different types of...
MIXING WORKSTATION - AE-PLC-MS
  • AE-PLC-MS
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ
AE-PLC-MS
Станция смешивания
The "AE-PLC-MS" is a mixing system commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different valves. The system is equipped with flow...
FILLING WORKSTATION - AE-PLC-FS
  • AE-PLC-FS
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ
AE-PLC-FS
Станция наполнения
The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....
CORKING WORKSTATION - AE-PLC-CRS
  • AE-PLC-CRS
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ
AE-PLC-CRS
Станция закупоривания
The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...
CONTROL PROCESSES WORKSTATION - AE-PLC-CP
  • AE-PLC-CP
Available
6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ
AE-PLC-CP
Станция АСУ ТП
The "AE-PLC-CP" is a process control workstation commanded by a PLC that coordinates the work of 3 industrial controllers that regulates in parallel the level, flow rate, temperature and pressure processes. The "AE-PLC-CP" workstation has been...
PIECES MANIPULATOR WORKSTATION - AE-PLC-MPS
  • AE-PLC-MPS
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-MPS
Станция раздачи кусков
The "AE-PLC-MPS", Pieces Manipulator Workstation, is a unit that works with pneumatics, electro-pneumatics and vacuum technologies.The "AE-PLC-MPS" performs the following operation: moving a piece from one position to another by using suction pads...
POSITIONING WORKSTATION - AE-PLC-SPO
  • AE-PLC-SPO
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-SPO
Станция позиционирования
The "AE-PLC-SPO" is a positioning workstation commanded by a PLC that checks the material and dimensions of the incoming pieces to sorting in three different places. The "AE-PLC-SPO" uses a three axis manipulator to pick and place the incoming...
ELECTRICAL HANDLING WORKSTATION - AE-PLC-MAE
  • AE-PLC-MAE
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-MAE
Рабочая станция для электромонтажных работ
The "AE-PLC-MAE" is an electrical handling system commanded by a PLC. The "AE-PLC-MAE" is composed of a two axis electrical manipulator with a pneumatic gripper to transport the pieces from the input pieces holder to the corresponding position,...
PNEUMATIC HANDLING WORKSTATION - AE-PLC-MAN
  • AE-PLC-MAN
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-MAN
Рабочая станция для монтажа воздуховода
The "AE-PLC-MAN" is a pneumatic handling workstation commanded by a PLC, which performs handling and sorting functions.The workstation identify the color of the input pieces at the input pieces area, once the color is identified, the station take...
AC CONVEYOR BELT WORKSTATION - AE-PLC-CTCA
  • AE-PLC-CTCA
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-CTCA
Ленточный конвейер с двигателем переменного тока
The "AE-PLC-CTCA" is an AC powered conveyor system commanded by a PLC. The "AE-PLC-CTCA" is composed by a conveyor, 4 position sensors to stop the conveyor at different positions, motor positioner, AC motor driver and three-phased motor to a...
CC CONVEYOR BELT WORKSTATION - AE-PLC-CTCC
  • AE-PLC-CTCC
Available
6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ
AE-PLC-CTCC
Ленточный конвейер с двигателем постоянного тока
The "AE-PLC-CTCC" is a DC powered conveyor system commanded by a PLC. The "AE-PLC-CTCC" is composed by a conveyor, 4 position sensors to stop the conveyor at different positions, motor positioner, DC motor driver and DC motor to a complete control...
Запросить информацию