NEW Basic Mechanics course
Читать дальше7.1.- МАШИНОСТРОЕНИЕ
Механическая инженерия - это применение физики к элементам, которые нас окружают, для улучшения существующих механических устройств или создания новых. Поскольку он основан на физических принципах, его происхождение восходит к истокам этих принципов, и его разработка тесно связана с достижениями механики. Тем не менее, только изобретение парового двигателя стало одним из столпов развития отрасли.
Узнать большеВ результате создания этого устройства произошла Промышленная революция семнадцатого века. С этого момента при участии ученых и инженеров, столь же важных, как Ватт, Стефенсон, Тесла или Ранкин, началось беспрецедентное обновление как концепции, так и разработки новых аппаратов.
Понятие промышленности, как оно было известно до этого момента, изменилось с развитием этих машин. Масовое производство было реализовано, машинныедизайны были усовершенствованы, и, следовательно, расширился диапазон производственных процессов, в результате чего появилось немыслимое разнообразие новых продуктов, адаптированных к потребностям общества.
С точки зрения машиностроения, стоит упомянуть следующие области изучения и применения:
- Механизмы.
- Структуры.
- Динамика.
- Вибрации.
- Обстановки.
В настоящее время любая отрасль промышленности, от продовольственной до аэрокосмической, должна быть на самом высоком технологическом уровне инновации. Поэтому исследования и разработки новых устройств особенно важны для того, чтобы всегда иметь новейшую технологию и быть на уровне, требуемом отраслью 4.0.
Посмотреть продукты
Материалы по Tеме
ПРОДУКТЫ МАШИНОСТРОЕНИЕ
14.1.2.2.- ПРИВОДЫ
MCDA
The Combined Drives Assembly Unit, "MCDA", allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology.With this unit, practices can be carried out to...
14.1.2.2.- ПРИВОДЫ
MGTA
Оборудование для монтажа передачи с шестернями
The Unit to Study Gear Train Assembly, "MGTA", allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the technique of mechanical...
14.1.2.2.- ПРИВОДЫ
MGE
Устройство переключения скоростей
The Gear Generation Unit, "MGE", has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...
14.1.2.2.- ПРИВОДЫ
MEE
Подъёмные механизмы с редуктором
The Geared Lifting Unit, "MEE", has been designed to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support the gear...
7.1.2.2.- ПРИВОДЫ
MESE-T
Изучение зубчатых колес
The Geared Study Drive Unit, "MESE", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission.For the...
7.1.2.2.- ПРИВОДЫ
KSGT
Устройство кинематического исследования зубчатых передач
The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...
7.1.3.- СТАТИКА И ДИНАМИКА
MEMB2
Блок для изучения равновесия моментов в системе двухплечевого рычага
The Unit for studying Equilibrium of Moments on a Two Arm Lever,"MEMB2", allows to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme of a vertical support...
7.1.3.- СТАТИКА И ДИНАМИКА
MBMRC
Оборудование для балансировки взаимодействующих масс, управляемое с компьютером (ПК)
The Computer Controlled Balance of Reciprocating Masses Unit, "MBMRC", is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...
7.1.3.- СТАТИКА И ДИНАМИКА
MEAL
Устройство для анализа работы камеры
The Cam Analysis Unit "MEAL" allows to observe the effect of the profile of a cam, the study of the displacement, velocity and acceleration profiles of the cam and the identification of the factors that can modify the dynamics of the cam. This...
7.1.3.- СТАТИКА И ДИНАМИКА
MDFC
Устройство демонстрации силы Кориолиса
The Coriolis Force Demonstration Unit, "MDFC", is used to observe the deflection of a jet of water generated by a pump attached to a rotating arm that rotates to different speeds in a horizontal plane. An electronically controlled motor rotates...
7.1.3.- СТАТИКА И ДИНАМИКА
MFCE
Устройство демонстрации центробежной силы
The Centrifugal Force Unit, "MFCE", is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis. The unit consists of a vertical axis of rotation and a rotating arm....
7.1.3.- СТАТИКА И ДИНАМИКА
MGI
Гироскоп
The Gyroscope, "MGI", allows the experimental demonstration of the different rotation modes of a gyroscope and the moments generated by the gyroscopic effect. The rotor of the electric motor (rotating motor) shares a horizontally supported shaft...
7.1.3.- СТАТИКА И ДИНАМИКА
CGU
Центробежный регулятор
The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...
7.1.3.- СТАТИКА И ДИНАМИКА
MED
Установка для балансировки статики и динамики
The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...
7.1.3.- СТАТИКА И ДИНАМИКА
MES
Установка простой балансировки
The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...
7.1.3.- СТАТИКА И ДИНАМИКА
MIF
Устройство инерционного маховика
The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...
7.1.3.- СТАТИКА И ДИНАМИКА
MRYE1
Устройство для вращения колёс и осей
The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...
7.1.3.- СТАТИКА И ДИНАМИКА
MRYE2
Устройство для вращения колёс и дифференциальных осей
The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...
7.1.3.- СТАТИКА И ДИНАМИКА
MELH
Устройство для изучения законa Гука
The Unit for studying Hooke's Law, "MELH", demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring – mass system.The...
7.1.3.- СТАТИКА И ДИНАМИКА
MSHU
Устройство простых гармонических колебаний
This Simple Harmonic Motion Unit, "MSHU", allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a support that allows...
7.1.3.- СТАТИКА И ДИНАМИКА
SRI
Устройство для изучения инерции вращения
The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...
7.1.4.- ВИБРАЦИЯ И КОЛЕБАНИЯ
MEVTC
Контролируемое ПК устройство для изучения колебаний при кручении
The Computer Controlled Torsional Vibration Unit, "MEVTC" is designed to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with one, two or three...
7.1.4.- ВИБРАЦИЯ И КОЛЕБАНИЯ
MVRE
Вибрации спирального вытянутого элемента
The Vibration of Coil Spring Unit, "MVRE", unit has been designed to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion. In this sense, the unit consists of a rigid...
7.1.4.- ВИБРАЦИЯ И КОЛЕБАНИЯ
MVL
Безвибрационное устройство
The Free Vibration Unit, "MVL", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be made to the...