Are you a teacher or do you work as an engineering researcher? EDIBON offers courses for teachers and #research staff. Take a look at the course Basic Mechanics and learn about #forces and vectors. #DiscoverEdibon #Engineering.
MELH Устройство для изучения законa Гука
ИННОВАЦИОННЫЕ СИСТЕМЫ
The Unit for studying Hooke's Law, "MELH", demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring – mass system.
Расширения
НОВОСТИ ПО ТЕМЕ
ОБЩЕЕ ОПИСАНИЕ
The Unit for studying Hooke's Law, "MELH", demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring – mass system.
The "MELH" unit includes three springs with two different elastic moduli. They will be suspended from their upper end by hooks anchored to the frame.
Load will be applied to the lower end of the spring by hanging masses from it and the rules included in the unit will be used to read directly the deformation generated in the springs. Thus, the elastic modulus of each spring is obtained by applying Hooke's law.
The unit allows the performance of studies in series and in parallel by combining the springs provided.
УПРАЖНЕНИЯ И ПРИМЕРЫ С ИНСТРУКЦИЯМИ
РУКОВОДСТВО ПО ПРАКТИЧЕСКИМ УПРАЖНЕНИЯМ ВКЛЮЧЕНО В РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
- Demonstration of Hooke's law.
- Research on the proportionality of force applied and elongation of the spring.
- Determination of the spring constant.
- Study of the arrangement in series of two tension springs.
- Study of the arrangement in parallel of two tension springs.
- Research on the influence of the spring constant on the oscillation frequency of a mass-spring system.
ДОПОЛНИТЕЛЬНОЕ ОБОРУДОВАНИЕ
7.1.3.- СТАТИКА И ДИНАМИКА
MEMB2
The Unit for studying Equilibrium of Moments on a Two Arm Lever,"MEMB2", allows to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme of a vertical support...
7.1.3.- СТАТИКА И ДИНАМИКА
MBMRC
Оборудование для балансировки взаимодействующих масс, управляемое с компьютером (ПК)
The Computer Controlled Balance of Reciprocating Masses Unit, "MBMRC", is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...
7.1.3.- СТАТИКА И ДИНАМИКА
MEAL
Устройство для анализа работы камеры
The Cam Analysis Unit "MEAL" allows to observe the effect of the profile of a cam, the study of the displacement, velocity and acceleration profiles of the cam and the identification of the factors that can modify the dynamics of the cam. This...
7.1.3.- СТАТИКА И ДИНАМИКА
MDFC
Устройство демонстрации силы Кориолиса
The Coriolis Force Demonstration Unit, "MDFC", is used to observe the deflection of a jet of water generated by a pump attached to a rotating arm that rotates to different speeds in a horizontal plane. An electronically controlled motor rotates...
7.1.3.- СТАТИКА И ДИНАМИКА
MFCE
Устройство демонстрации центробежной силы
The Centrifugal Force Unit, "MFCE", is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis. The unit consists of a vertical axis of rotation and a rotating arm....
7.1.3.- СТАТИКА И ДИНАМИКА
MGI
Гироскоп
The Gyroscope, "MGI", allows the experimental demonstration of the different rotation modes of a gyroscope and the moments generated by the gyroscopic effect. The rotor of the electric motor (rotating motor) shares a horizontally supported shaft...
7.1.3.- СТАТИКА И ДИНАМИКА
CGU
Центробежный регулятор
The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...
7.1.3.- СТАТИКА И ДИНАМИКА
MED
Установка для балансировки статики и динамики
The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...
7.1.3.- СТАТИКА И ДИНАМИКА
MES
Установка простой балансировки
The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...
7.1.3.- СТАТИКА И ДИНАМИКА
MIF
Устройство инерционного маховика
The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...
7.1.3.- СТАТИКА И ДИНАМИКА
MRYE1
Устройство для вращения колёс и осей
The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...
7.1.3.- СТАТИКА И ДИНАМИКА
MRYE2
Устройство для вращения колёс и дифференциальных осей
The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...