Лидеры продаж

Показано 889-912 из 941

AE-PLC-PAN

Available

6.2.1.- ОПЦИИ ПЛК

AE-PLC-PAN

Устройство ПЛК типа PANASONIC

The PANASONIC PLC Application, "AE-PLC-PAN", is a PLC unit designed by EDIBON which use one of the last PANASONIC PLC units. It allows the user to learn about PLC logic programming, different PLC programming languages, PLC to PC communication,...

AE-PLC-SIE

Available

6.2.1.- ОПЦИИ ПЛК

AE-PLC-SIE

Устройство ПЛК типа SIEMENS

The SIEMENS PLC Application, "AE-PLC-SIE", is a PLC unit designed by EDIBON which use one of the last SIEMENS PLC units. It allows the user to learn about PLC logic programming, different PLC programming languages, PLC to PC communication, etc.The...

ELEVATOR CONTROL APPLICATION - AE-PLC-SE

AE-PLC-SE

Available

6.2.4.- ПРОМЫШЛЕННОЕ ПРИМЕНЕНИЕ С ПЛК

AE-PLC-SE

Устройство управления лифтом

The Elevator Control Application, "AE-PLC-SE", has been designed by EDIBON with a double objective. On the one hand, this application allows to study the main electro-mechanical components that nowadays integrate any elevator. The most relevant...

PNEUMATIC HANDLING WORKSTATION - AE-PLC-MAN

AE-PLC-MAN

Available

6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ

AE-PLC-MAN

Учебная пневматическая станция манипуляции

The "AE-PLC-MAN" is a pneumatic handling workstation commanded by a PLC, which performs handling and sorting functions.The workstation identify the color of the input pieces at the input pieces area, once the color is identified, the station take...

PNEUMATIC HANDLING AND CONVEYOR BELT - AE-PLC-MACT

AE-PLC-MACT

Available

6.2.5.4.- РАБОЧЕЕ МЕСТО ДЛЯ УПРАВЛЕНИЯ ФРАГМЕНТАМИ ПРИЛОЖЕНИЙ

AE-PLC-MACT

Учебная пневматическая станция манипуляции и конвейерной ленты

The Pneumatic Handling and Conveyor Belt, "AE-PLC-MACT", is an automatic handling station with a conveyor system commanded by a PLC. The "AE-PLC-MACT" is composed of a pneumatic handling system that uses vacuum technology to move pieces from the...

COMPUTER CONTROLLED TEACHING CREAM SEPARATOR - DSNC

DSNC

Available

12.2.- ОБРАБОТКА МОЛОЧНЫХ ПРОДУКТОВ

DSNC

Учебная сепараторная машина, управляемая с компьютером (ПК)

The Computer Controlled Teaching Cream Separator, "DSNC", allows the study of the separation of a dense phase liquid from a lighter phase liquid, in particular the separation of the cream from the milk in a disk stack centrifuge. The system is...

AE-PLC-APS

Available

6.2.5.1.- РАБОЧЕЕ МЕСТО ДЛЯ ЗАГРУЗКИ ФРАГМЕНТОВ ПРИЛОЖЕНИЙ

AE-PLC-APS

Учебная станция питания деталей

The Pieces Feeder Workstation, "AE-PLC-APS", is a unit that works with pneumatics and electro-pneumatics technologies.The function of the "AE-PLC-APS" is to supply pieces and to verify them, if they are acceptable.The pieces will be supplied one...

AE-PLC-MEMB

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-MEMB

Учебная станция розлива

The Bottling Workstation, "AE-PLC-MEMB", designed by EDIBON, is an automatic rotary table with a vessel feeding system, a controlled water filling system, a cap feeder, a vessel closing system, and finally, an extraction system to a complete...

AE-BR

Available

6.2.5.5.- РАБОЧЕЕ МЕСТО ДЛЯ РОБОТИЗИРОВАННЫХ ПРИЛОЖЕНИЙ

AE-BR

Учебная станция с роботизированной рукой

The "AE-BR" is a robotic arm workstation with the programming console included. The robotic arm can command the pneumatic gripper or the electrical driller installed in it.The "AE-BR" workstation is able to perform a lot of functions including:...

AE-PLC-M

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-M

Учебная станция сборки

The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...

AE-PLC-ST

Available

6.2.5.2.- РАБОЧЕЕ МЕСТО ОБРАБОТКИ ПРИЛОЖЕНИЙ

AE-PLC-ST

Учебная станция сверления

The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...

INDUSTRIAL PROCESSES CONTROL WORKSTATION - AE-PLC-CPI

AE-PLC-CPI

Available

6.2.4.- ПРОМЫШЛЕННОЕ ПРИМЕНЕНИЕ С ПЛК

AE-PLC-CPI

Учебная станция управления промышленными процессами

The Industrial Processes Control Workstation, "AE-PLC-CPI", designed by EDIBON, is a unit that integrates different technologies to implement four closed-loop control loops: flow, level, temperature, and pressure. The different control loops are...

Available

9.2.- ОТОПЛЕНИЕ, ВЕНТИЛЯЦИЯ, КОНДИЦИОНИРОВАНИЕ ВОЗДУХА И ГОРЯЧАЯ ВОДА

WHT

Учебное оборудование для водонагревателей

The Water Heater Training Unit, "WHT", allows demonstrating the operation of three types of water heaters. The unit has three heaters, two of them commercial one with electronic ignition and one in millivolt, and a residential gas heater without...

THBT

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

THBT

Учебное оборудование для гидравлической балансировки радиаторов

The Hydraulic Radiator Balancing Training Unit, "THBT", allows the study of the amount of water with which to guarantee that all the radiators of an installation are supplied with sufficient hot water.The hydraulic balancing is carried out by...

TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT

TEMT

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TEMT

Учебное оборудование для измерения температуры

The Temperature Measurement Training Unit, "TEMT", designed by EDIBON, allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four...

MEGE

Available

7.3.1.- ФОТОУПРУГОСТЬ И ТЕНЗОМЕТРИЯ

MEGE

Учебное оборудование для изучения тензодатчиков

The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...

COMPUTER CONTROLLED HOT WATER PRODUCTION AND HEATING TEACHING UNIT - EACC

EACC

Available

9.2.- ОТОПЛЕНИЕ, ВЕНТИЛЯЦИЯ, КОНДИЦИОНИРОВАНИЕ ВОЗДУХА И ГОРЯЧАЯ ВОДА

EACC

Учебное оборудование для производства горячей воды и отопления, управляемое компьютером (ПК)

The main element of the Computer Controlled Hot Water Production and Heating Teaching Unit, "EACC", is the boiler. Its function is the heating of the water that will flow through the other elements transferring its heat. It is a low temperature...

COMPUTER CONTROLLED BUTTER MAKER TEACHING UNIT - EMANC

EMANC

Available

12.2.- ОБРАБОТКА МОЛОЧНЫХ ПРОДУКТОВ

EMANC

Учебное оборудование для производства масла, управляемое компьютером (ПК)

The Computer Controlled Butter Maker Teaching Unit, "EMANC", has been designed to provide practical training in the manufacture of butter.The main structure is a stainless steel tank with a capacity of 25 l. At the top, a cover made of stainless...

COMPUTER CONTROLLED SOLIDS PACKAGING TEACHING UNIT - EDSC

EDSC

Available

12.1.- ТЕХНОЛОГИИ ПРОИЗВОДСТВА ПРОДУКТОВ ПИТАНИЯ

EDSC

Учебное оборудование для упаковки твердых веществ, управляемое компьютером (ПК)

The Computer Controlled Solids Packaging Teaching Unit, "EDSC", designed by EDIBON, has been conceived for the complete study of the dosing, filling, and sealing process of solid products. Its design allows reproducing, at laboratory scale, the...

TCPT

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TCPT

Учебное оборудование для циркуляционных насосов

The Circulating Pumps Training Unit, "TCPT", designed by EDIBON, is an advanced tool designed to facilitate the study and understanding of the operation of circulation pumps in heating systems and sanitary techniques. This unit allows...

COMPUTER CONTROLLED TEACHING AUTONOMOUS PASTEURIZATION UNIT - PADC

PADC

Available

12.2.- ОБРАБОТКА МОЛОЧНЫХ ПРОДУКТОВ

PADC

Учебный автономный пастеризатор, управляемый с компьютером (ПК)

The Computer Controlled Teaching Autonomous Pasteurization Unit, "PADC", designed by EDIBON, receives cold milk from a refrigeration tank (not included). The milk is impelled with a milk pump (computer controlled). It is heated in the heat...

COMPUTER CONTROLLED TEACHING YOGURT INCUBATOR - IYDC

IYDC

Available

12.2.- ОБРАБОТКА МОЛОЧНЫХ ПРОДУКТОВ

IYDC

Учебный инкубатор для йогурта, управляемый с компьютера (ПК)

The Computer Controlled Teaching Yogurt Incubator, "IYDC", is called yogurt maker or yogurt heater. This yogurt maker consists of an insulated central body where yogurt fermentation is carried out.There is a series of shelves inside to place the...

COMPUTER CONTROLLED TEACHING CURDLING TANK - CCDC

CCDC

Available

12.2.- ОБРАБОТКА МОЛОЧНЫХ ПРОДУКТОВ

CCDC

Учебный Коагуляционный Бак, Управляемый компьютером (ПК)

The Computer Controlled Teaching Curdling Tank, "CCDC", designed by EDIBON, is employed to curdle milk, which is an essential process to make cheese.The unit has tank, water jacket, coil with one inlet and outlet for the water of the boiler, inlet...

COMPUTER CONTROLLED THREE DIMENSIONS (3D) PHYSICS - EFAC

EFAC

Available

1.1.- ТРЁХМЕРНАЯ ФИЗИКА

EFAC

Физика в трех измерениях (3D), управляемая с компьютера (ПК)

The Computer Controlled Three Dimensional (3D) Physics, "EFAC", from EDIBON, allows to do practical exercises in the different fields of physics (electricity, magnetic fields, mechanics, acoustics, optics and thermodynamics).The "EFAC" is an open...

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ