Лидеры продаж

Показано 337-360 из 921

TSID

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TSID

Оборудование для дренажных систем

With the Sewerage Unit, "TSID", tests about a wastewater sanitation system can be made and the flow in a sewage system can be observed.A complete sewage system can be observed with the "TSID" unit. The collection of wastewater from a series of...

UELL

Available

11.1.5.- ЭКСТРАКЦИЯ

UELL

Оборудование для жидкостно-жидкостной экстракции

The Liquid-Liquid Extraction Unit, "UELL", is a laboratory scale unit designed to study the separation of the components of liquid mixtures by contact of the mixture with an immiscible solvent in which these components are preferentially...

COMPUTER CONTROLLED LIQUID-LIQUID EXTRACTION UNIT - UELLC

UELLC

Available

11.1.5.- ЭКСТРАКЦИЯ

UELLC

Оборудование для жидкостно-жидкостной экстракции, управляемое компьютером (ПК)

The Computer Controlled Liquid-Liquid Extraction Unit, "UELLC", is a laboratory scale unit designed to study the separation of the components of liquid mixtures by contact of the mixture with an immiscible solvent in which these components are...

COMPUTER CONTROLLED GAS LAWS UNIT (BOYLE AND GAY-LUSSAC LAWS) - TLBGC

TLBGC

Available

9.1.- ОСНОВЫ И БАЗОВЫЕ ПРИНЦИПЫ ТЕРМОДИНАМИКИ

TLBGC

Оборудование для законов газов (законы Бойля и Гей-Люссака), управляемое компьютером (ПК)

The Computer Controlled Gas Laws Unit (Boyle and Gay-Lussac Law), "TLBGC", allows to demonstrate two fundamental gas laws: Boylend Mariotte's Law (isothermal change of state) and Gay-Lussac's 2 Law (isochoric change of state).The unit consists of...

PROTECTION OF DRINKING WATER TRAINING UNIT - TPAP

TPAP

Available

9.10.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

TPAP

Оборудование для защиты питьевой установки

The Protection of Drinking Water Training Unit, "TPAP", has been designed by EDIBON to study cases in which the drinking water system is contaminated with wastewater. It is specially designed for the training of students in the plumbing sector.The...

Available

14.1.2.2.- ПРИВОДЫ

MGE

Оборудование для изготовления зубчатых передач

The Gear Generation Unit, "MGE", has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...

TMHA

Available

9.2.- ОТОПЛЕНИЕ, ВЕНТИЛЯЦИЯ, КОНДИЦИОНИРОВАНИЕ ВОЗДУХА И ГОРЯЧАЯ ВОДА

TMHA

Оборудование для измерения влажности воздуха

The Air Humidity Measurement Unit, "TMHA", enables the differences in accuracy between different instruments to measure the air relative humidity. It also includes a fan to show the effects of airflow on the different instruments. A mobile...

HEMP

Available

8.2.- ИЗМЕРЕНИЕ

HEMP

Оборудование для измерения давления

The Pressure Measurement Unit, "HEMP", enables a wide range of investigations and studies into pressure measurement techniques, using Bourdon type manometers and different U-tube manometers, to understand the operation, the characteristics of the...

PRESSURE MEASUREMENT AND CALIBRATION UNIT - TMCP

TMCP

Available

8.2.- ИЗМЕРЕНИЕ

TMCP

Оборудование для измерения и калибровки давления

The Pressure Measurement and Calibration Unit, "TMCP", has been designed to study the concept of pressure and the different methods and techniques used to measure this variable.The dead-weight calibrator consists of a cylinder in which interior a...

COMPUTER CONTROLLED FLOW OF COMPRESSIBLE FLUIDS UNIT - HFCC

HFCC

Available

8.7.5.- КОМПРЕССОРЫ

HFCC

Оборудование для измерения компрессионного потока жидкостей, управляемое с компьютером (ПК)

The Computer Controlled Flow of Compressible Fluids Unit, "HFCC", allows to study the variation of pressure and density, the speeds of the fluid, the different fluctuations that the fluid presents when fluids across different sections in a pipe,...

Available

9.1.- ОСНОВЫ И БАЗОВЫЕ ПРИНЦИПЫ ТЕРМОДИНАМИКИ

TMT

Оборудование для измерения температуры

The Temperature Measurement Unit, "TMT", works as a temperature meter that uses different temperatures measuring devices to compare, check and analyze the temperature and how is the precision for the measure and for the device that the student has...

COMPUTER CONTROLLED TEMPERATURE MEASUREMENT UNIT - TMTC

TMTC

Available

9.1.- ОСНОВЫ И БАЗОВЫЕ ПРИНЦИПЫ ТЕРМОДИНАМИКИ

TMTC

Оборудование для измерения температуры, управляемое компьютером (ПК)

The Computer Controlled Temperature Measurement Unit, "TMTC", designed by EDIBON, works as a temperature meter that uses different temperatures measuring devices to compare, check and analyze the temperature and how is the precision for the...

COMPUTER CONTROLLED ACOUSTIC IMPEDANCE TUBE/ACOUSTIC INSULATION TEST UNIT - TIAC

TIAC

Available

7.3.2.2.- ТЕПЛОВОЙ И АКУСТИЧЕСКИЙ ТЕСТЫ

TIAC

Оборудование для изучения акустического импеданса/звукоизоляции, управляемое компьютером (ПК)

This unit has been designed to provide students with an easy and simple method for understanding and investigating the relative acoustic properties of several materials. It demonstrates acoustic attenuation of a range of building materials as...

VENTURI, BERNOULLI AND CAVITATION UNIT - FME22

FME22

Available

8.1.4.- ГИДРОДИНАМИКА

FME22

Оборудование для изучения Вентури, Бернулли и кавитации

The Venturi, Bernoulli and Cavitation unit, "FME22", has been designed by EDIBON to demonstrate some of the practical possibilities that can be achieved with a Venturi tube.This unit is designed for demonstrating some practical possibilities with...

MVRE

Available

7.1.4.- ВИБРАЦИИ И КОЛЕБАНИЯ

MVRE

Оборудование для изучения вибраций спиральной пружины

The Vibration of Coil Spring Unit, "MVRE", has been designed by EDIBON to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion.In this sense, the unit consists of a...

MEER

Available

7.1.4.- ВИБРАЦИИ И КОЛЕБАНИЯ

MEER

Оборудование для изучения вращения валов

The Whirling of Shafts Unit, "MEER", has been designed by EDIBON to demonstrate and determine different modes of oscillation and resonance of shafts with continuous distribution of mass under different conditions.The operation of the Whirling of...

UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3

MFCS3

Available

7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА

MFCS3

Оборудование для изучения деформации в фермах

The Unit for studying Deformation of Trusses, "MFCS3", designed by EDIBON, allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the...

MELH

Available

7.1.3.- СТАТИКА И ДИНАМИКА

MELH

Оборудование для изучения закона Гука

The Unit for studying Hooke's Law, "MELH", designed by EDIBON, demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring –...

MEAL

Available

7.1.3.- СТАТИКА И ДИНАМИКА

MEAL

Оборудование для изучения и анализа кулачков

The Cam Analysis Unit, "MEAL", designed by EDIBON, allows to observe the effect of the profile of a cam, the study of the displacement, velocity and acceleration profiles of the cam and the identification of the factors that can modify the...

MFLT

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MFLT

Оборудование для изучения изгиба стержней

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...

SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF

Available

7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ

MMF

Оборудование для изучения изгибающего момента и поперечной силы

The Shear Force and Bending Momentum Unit, "MMF", designed by EDIBON, is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the...

UNIT FOR THE KINEMATIC STUDY OF GEAR TRAINS - KSGT

KSGT

Available

7.1.2.2.- ПРИВОДЫ

KSGT

Оборудование для изучения кинематики зубчатых передач

The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...

WHEEL AND DIFFERENTIAL AXLE UNIT - MRYE2

MRYE2

Available

7.1.3.- СТАТИКА И ДИНАМИКА

MRYE2

Оборудование для изучения колеса и дифференциальной оси (дифференциальный токарный станок)

The Wheel and Differential Axle Unit, "MRYE2", has been designed by EDIBON to investigate the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...

FILM AND DROPWISE CONDENSATION UNIT - TCPGB

TCPGB

Available

9.7.- ТЕПЛООБМЕННИКИ

TCPGB

Оборудование для изучения конденсации (пленочной и капельной)

The Film and Dropwise Condensation Unit, "TCPGB", has been specially designed for students use and to provide visual results and quantitative results related to heat transfer during condensation.Self-contained unit, which has its own steam...

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ