최고 판매자
Showing 721-744 of 941 item(s)
12 24 36
CONTINUOUS STIRRED TANK REACTOR FOR QR - QRCA
  • 액세서리 QR
Available
11.2.- 화학 반응기
QRCA
연속 탱크 교반 반응기, QR용
액세서리 QR
The Continuous Stirred Tank Reactor for QR, "QRCA", designed by EDIBON, provides a controlled environment for detailed kinetic study of homogeneous liquid-liquid chemical reactions. This type of reactor, also known as CSTR (Continuous Stirred-Tank...
뷰 유닛
HEAT EXCHANGER TRAINING SYSTEM - TICB
  • TICB
Available
9.7.- 열교환 기
TICB
열교환기 훈련 시스템
Heat exchangers are widely used in refrigeration, air conditioning, heating, energy generation, chemical processing, etc. They have many applications in engineering and, as a consequence, there are many models adapted to each application to obtain...
뷰 유닛
BOMB CALORIMETER - TBCF
  • TBCF
Available
9.1.- 열역학의 기본 및 기본 개념
TBCF
열량계 펌프
Bomb Calorimeter, "TBCF", comprises the calorimeter, a calorimeter vessel, an outer double walled water jacket, control unit to switch on/off the stirrer and the ignition device, an accurate thermometer and charging unit with pressure gauges to...
뷰 유닛
COMPUTER CONTROLLED THERMO-ELECTRIC HEAT PUMP - TBTC
  • TBTC
Available
5.3.11.- 기타 비 전통적 시스템
TBTC
열전기 히트펌프, 컴퓨터(PC) 제어
The Computer Controlled Thermo-Electric Heat Pump, "TBTC", has been designed by EDIBON to study of different phenomena in which heat and electricity take place (Thermoelectricity). Some of them are the Peltier effect, the Thomson or Lenz effect...
뷰 유닛
WIND POWER APPLICATION WITH PERMANENT MAGNETS SYNCHRONOUS GENERATOR - AEL-WPT
  • AEL-WPT
Available
5.3.3.- 풍력 에너지
AEL-WPT
영구 자석 동기 발전기 풍력 발전 응용
Considering the above, this application allows experimental investigation on the conversion of wind energy into electricity by means of a wind power generator. The system configuration is stand-alone (isolated from the grid). The equipment is...
뷰 유닛
OSCILLATORS MODULE - N-M6
  • N-M6
Available
14.2.1.2.- 아날로그 전자
N-M6
오실레이터 모듈
Oscillators operation is usually very similar in all of them: the oscillating circuit produces an oscillation, then the amplifier increases it and finally the feedback network takes a part of the energy from the oscillating circuit and introduces...
뷰 유닛
OPERATIONAL AMPLIFIERS KIT - M7/KIT
Available
2.2.- 회로 조립 용 키트
M7/KIT
오퍼레이션 앰프 키트
액세서리 M-KITS
With Operational Amplifiers Kit, "M7/KIT", designed by EDIBON, the different amplifiers can be studied: inverting, non-inverting, additive, differential and comparators.
뷰 유닛
TEMPERATURE TEST MODULE - BS2
  • 액세서리 BS
Available
6.1.2.1.- 센서 및 전자 기기
BS2
온도 실험 모듈
액세서리 BS
Temperature Test Module, "BS2", has been designed by EDIBON to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that...
뷰 유닛
TEMPERATURE CONTROL MODULE - RYC-TE
Available
6.1.1.1.- 이론적 실용적 기초
RYC-TE
온도의 PID 제어 및 조절 장비
액세서리 RYC, RYC/T
The PID Temperature Control and Regulation Unit, "RYC-TE", designed by EDI­BON, enables the practical study of automatic control systems through the regulation of water temperature in a tank.This unit allows students and technicians to understand...
뷰 유닛
COMPLETE AIR CONDITIONING SYSTEM MODEL - TRAMC/4
Available
9.10.3.- 설치 및 유지 관리 관행
TRAMC/4
완전한 공조 시스템 모델
액세서리 TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
뷰 유닛
PILOT PLANT FOR THE PRODUCTION OF YOGURT - LE00/Y
  • LE00/Y
Available
유제품 실험 공장
LE00/Y
요거트 생산용 파일럿 플랜트
The Computer Controlled and Touch Screen Pilot Plants for the Production of Dairy Products, are pilot plants capable of demonstrating, for further research and study, the main processes involved in the dairy treatment industry. That is, from the...
뷰 유닛
CENTRIFUGAL PUMP CUTAWAY MODEL UNIT - CPCM
  • CPCM
Available
8.9.1.- 섹션 모델
CPCM
원심 펌프 모델 절단 장치
The Centrifugal Pump Cutaway Model Unit, "CPCM", designed by EDIBON, allows the students to visualize the inner parts of a centrifugal pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of...
뷰 유닛
ASSEMBLY AND MAINTENANCE OF A CENTRIFUGAL PUMP UNIT - AMCP
  • 액세서리 AMP
Available
8.9.2.- 분리 가능한 모델
AMCP
원심 펌프 조립 및 유지 보수 장비
액세서리 AMP
The centrifugal pumps belong to the group of rotodynamic pumps, where the fluid is boosted thanks to the acceleration acquired whenpassing through the operating impeller.This acceleration, which starts from the center of the impeller and goes to...
뷰 유닛
CENTRIFUGAL FORCE UNIT - MFCE
  • MFCE
Available
7.1.3.- 통계 및 역학
MFCE
원심력 연구 장비
The Centrifugal Force Unit, "MFCE", designed by EDIBON, is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis.The unit consists of a vertical axis of rotation and a...
뷰 유닛
HOOKE'S JOINT MECHANISM - MUN
  • MUN
Available
7.1.2.1.- 메커니즘
MUN
유니버설 조인트 메커니즘
The Hooke’s Joint Mechanism, "MUN", designed by EDIBON, represents a universal coupling, also called a U-joint, Hooke joint or cardan joint. The Hooke joint is a universal mechanism that is often used to transmit rotary motion between two...
뷰 유닛
WIND POWER PLANTS WITH INDUCTION GENERATOR APPLICATION - AEL-WPPI
  • AEL-WPPI
Available
5.3.3.- 풍력 에너지
AEL-WPPI
유도 발전기 풍력 발전소 응용
The Wind Power Plants with Induction Generator Application, "AEL-WPPI", has been developed by EDIBON to study the wind turbines electrical performance with three-phase induction generators of squirrel cage that inject power in the network.Wind...
뷰 유닛
AERODYNAMIC TUNNEL FOR FLOW VISUALIZATION - TAVF180/100
  • TAVF180/100
Available
8.4.- 흐름 시각화
TAVF180/100
유량 시각화를 위한 공기역학적 풍동
The Flow Visualization Aerodynamic Tunnel, "TAVF180/100", designed by EDIBON, consists of a vertical conduction in which an upward flow of air and smoke is induced, which passes through different models allowing to study the behavior of the flow...
뷰 유닛
FLOW TEST MODULE - BS4
  • 액세서리 BS
Available
6.1.2.1.- 센서 및 전자 기기
BS4
유량 실험 모듈
액세서리 BS
Flow Test Module, "BS4", has been designed by EDIBON show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve...
뷰 유닛
FLOW METERS DEMONSTRATION - FMDU
  • FMDU
Available
8.2.- 측정
FMDU
유량계 데모
Flow Meters Demonstration, "FMDU", designed by EDIBON, demonstrates the important characteristics of fifteen types of flow meters used in the measurement of water flow through pipes or open channels.The main element is the FMDU Base Unit,...
뷰 유닛
FLOWMETER CALIBRATOR - FME37
  • FME37
Available
8.1.2.- 측정
FME37
유량계 보정기
The Flowmeter Calibrator, "FME37", designed by EDIBON, allows for the assessment of the accuracy and performance of the most commonly used flow meters. It features a panel of four-tube pressure gauges displaying pressure differences at various...
뷰 유닛
정보 요청