최고 판매자
Showing 421-450 of 941 item(s)
12 24 36
UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1
  • MFCS1
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)
MFCS1
Unit for studying Forces in Different Single Plane Trusses
The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", designed by EDIBON, allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the...
뷰 유닛
UNIT FOR STUDYING HOOKE´S LAW - MELH
  • MELH
Available
7.1.3.- 통계 및 역학
MELH
Unit for studying Hooke´s Law
The Unit for studying Hooke's Law, "MELH", designed by EDIBON, demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring –...
뷰 유닛
UNIT FOR STUDYING METHODS TO DETERMINE THE ELASTIC LINE - MDLE
  • MDLE
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)
MDLE
Unit for studying Methods to Determine the Elastic Line
The Unit for studying Methods to Determine the Elastic Line, "MDLE", designed by EDIBON, consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys,...
뷰 유닛
UNIT TO STUDY A CONTROL GEAR CUTAWAY MODEL - CGCM
Available
7.4.1.- 섹션 모델
CGCM
Unit to Study a Control Gear Cutaway Model
액세서리 CMTM
The Unit to Study a Control Gear Cutaway Model, "CGCM ", provides an in-depth analysis of these gears, which are designed to adjust the spacing between teeth, ensuring precise control in various mechanical applications.These gears are essential in...
뷰 유닛
UNIT TO STUDY A MITRE GEAR CUTAWAY MODEL - MGCM
Available
7.4.1.- 섹션 모델
MGCM
Unit to Study a Mitre Gear Cutaway Model
액세서리 CMTM
The Unit to Study a Mitre Gear Cutaway Model, "MGCM", designed by EDIBON, allows for the study of this type of transmission, which uses bevel gears to transmit motion between two perpendicular shafts.Due to their ability to change the direction of...
뷰 유닛
UNIT TO STUDY A MULTIPLE-DISC CLUTCH CUTAWAY MODEL - DCCM
Available
7.4.1.- 섹션 모델
DCCM
Unit to Study a Multiple-Disc Clutch Cutaway Model
액세서리 CMTM
The Unit to Study a Multiple-Disc Clutch Cutaway Model, "DCCM", designed by EDIBON, allows for the study of this Multiple-disk clutch system, used to transmit higher torques in mechanical systems.This type of clutch is widely used in chain tractor...
뷰 유닛
UNIT TO STUDY A PLANETARY GEAR CUTAWAY MODEL - PGCM
Available
7.4.1.- 섹션 모델
PGCM
Unit to Study a Planetary Gear Cutaway Model
액세서리 CMTM
The Unit to Study a Planetary Gear Cutaway Model, "PGCM", designed by EDIBON, allows for the study of one or more external or planet gears that revolves about a central or sun gear.Planetary gears are widely used in vehicle gearboxes, speed...
뷰 유닛
UNIT TO STUDY A SPUR GEAR CUTAWAY MODEL - SGCM
Available
7.4.1.- 섹션 모델
SGCM
Unit to Study a Spur Gear Cutaway Model
액세서리 CMTM
The Unit to Study a Spur Gear Cutaway Model, "SGCM, designed by EDIBON, It is a mitre gear.l power transmission systems.It is made up of bevel gears that consist of two conical cogwheels. This device is used to transmit motion between two...
뷰 유닛
UNIT TO STUDY A TWO-STAGE SPUR GEAR CUTAWAY MODEL - SGCM/2
Available
7.4.1.- 섹션 모델
SGCM/2
Unit to Study a Two-Stage Spur Gear Cutaway Model
액세서리 CMTM
The Sectioned Model of a Spur Gear Transmission, "SGCM/2", designed by EDIBON, allows for the study of this type of transmission, which is the simplest and most widely used in mechanical systems for motion and power transmission.These systems are...
뷰 유닛
UNIT TO STUDY A WORM GEAR CUTAWAY MODEL - WGCM
Available
7.4.1.- 섹션 모델
WGCM
Unit to Study a Worm Gear Cutaway Model
액세서리 CMTM
The Unit to Study a Worm Gear Cutaway Model, "WGCM", designed by EDIBON, allows for the study of a helical worm screw and a circular cogwheel.This type of transmission is widely used in automatic doors, elevators, and mechanisms that require...
뷰 유닛
UNIT TO STUDY ROTATIONAL INERTIA - SRI
  • SRI
Available
7.1.3.- 통계 및 역학
SRI
Unit to Study Rotational Inertia
The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...
뷰 유닛
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- 기계적 테스트
MUP
Universal Buckling Unit
The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
뷰 유닛
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- 기계적 테스트
EEU/20KN
Universal Material Testing Unit
The Universal Material Testing Unit, "EEU/20KN", designed by EDIBON, is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20...
뷰 유닛
UNSYMMETRICAL CANTILEVER UNIT - MVV
  • MVV
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)
MVV
Unsymmetrical Cantilever Unit
The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...
뷰 유닛
METACENTRIC HEIGHT DEMOSTRATION OF A "U" SHAPED FLOATING BODY - FME11-B
  • FME11-B
Available
8.1.3.- 수압
FME11-B
U모양 플로팅 개체의 메타 중심 높이 설명
The Metacentric Height Demostration of a "U" Shaped Floating Object, "FME11-B", designed by EDIBON, allows the study of the stability of a floating object by calculating its metacentric height starting from a U-shaped floating body.The unit...
뷰 유닛
U-SHAPE MANOMETER - HMM-U1000
  • 액세서리 HMM
Available
8.2.- 측정
HMM-U1000
U자형 마노미터
액세서리 HMM
The U-Shape Manometer, "HMM-U1000," designed by EDIBON, allows the study of various pressures and their relationship with the fluid. It measures the difference in liquid level in its columns, providing vital information for pressure analysis in...
뷰 유닛
VENTURI, BERNOULLI AND CAVITATION UNIT - FME22
  • FME22
Available
8.1.4.- 수압
FME22
Venturi, Bernoulli and Cavitation Unit
The Venturi, Bernoulli and Cavitation unit, "FME22", has been designed by EDIBON to demonstrate some of the practical possibilities that can be achieved with a Venturi tube.This unit is designed for demonstrating some practical possibilities with...
뷰 유닛
VIBRATION OF COIL SPRING UNIT - MVRE
  • MVRE
Available
7.1.4.- 진동 및 진동
MVRE
Vibration of Coil Spring Unit
The Vibration of Coil Spring Unit, "MVRE", has been designed by EDIBON to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion.In this sense, the unit consists of a...
뷰 유닛
VORTEX FLOW METER - FME30/I
  • FME30/I
Available
8.1.2.- 측정
FME30/I
Vortex Flow Meter
The Vortex Flowmeter, "FME30/I", designed by EDIBON, allows to perform different studies and experiments of various volumetric and mass flow measurement methods, as well as the comparison of continuous and discontinuous methods.This unit includes...
뷰 유닛
WATER HAMMER - FME15
  • FME15
Available
8.1.8.- 유압 파이프
FME15
Water Hammer
With the Water Hammer unit, "FME15", designed by EDIBON, we can demonstrate the effects of the instantaneous or gradual variation of the velocity of a fluid.The water hammer phenomenon, which appears as a consequence of a rapid change in the...
뷰 유닛
WATER HEATERS TRAINING UNIT - WHT
  • WHT
Available
9.2.- 난방, 환기, 에어컨 및 온수
WHT
Water Heaters Training Unit
The Water Heater Training Unit, "WHT", allows demonstrating the operation of three types of water heaters. The unit has three heaters, two of them commercial one with electronic ignition and one in millivolt, and a residential gas heater without...
뷰 유닛
WHEEL AND DIFFERENTIAL AXLE UNIT - MRYE2
  • MRYE2
Available
7.1.3.- 통계 및 역학
MRYE2
Wheel and Differential Axle Unit
The Wheel and Differential Axle Unit, "MRYE2", has been designed by EDIBON to investigate the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...
뷰 유닛
WIND ENERGY BASIC UNIT - MINI-EEE
  • MINI-EEE
Available
5.3.3.- 풍력 에너지
MINI-EEE
Wind Energy Basic Unit
The Wind Energy Basic Unit, "MINI-EEE", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up to six blades and a...
뷰 유닛
WIND ENERGY UNIT - EEE
  • EEE
Available
5.3.3.- 풍력 에너지
EEE
Wind Energy Unit
The Wind Energy Unit, "EEE", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The unit consists of a...
뷰 유닛
WORM AND WHEEL UNIT - MTSF
  • MTSF
Available
14.1.2.2.- 기어
MTSF
Worm and Wheel Unit
The Worm and Wheel Unit, "MTSF", designed by EDIBON, allows to demonstrate the principle of a worm gear.The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel.The worm and wheel are...
뷰 유닛
GAS POWER PLANTS SIMULATOR - PSV-GSPP-SOF
Available
5.1.3.1.- 발전
PSV-GSPP-SOF
가스 에너지 발전소 시뮬레이터
액세서리 PSV-PPSS
The PSV-GSPP-SOF software has been designed by EDIBON with the aim of showing the user the basic principles of operation of Brayton cycle gas turbine power plants, exposing in a didactic way the elements and parameters present in the generation...
뷰 유닛
GAS ABSORPTION COLUMN - CAG
  • CAG
Available
11.1.8.- 흡수 및 흡착
CAG
가스 흡수 컬럼
The Gas Absorption Column, "CAG", is a scale unit designed to study hydrodynamic and absorption processes in packed columns. This system absorbs ammonia or CO2 from a mixture with air in a watery solution that descends along the column.The main...
뷰 유닛
정보 요청