NEW Basic Mechanics course
Baca lebih lanjut7.1.- TEKNIK MESIN
Mechanical engineering is the application of physics to the elements that surround us to improve existing mechanical devices or create new ones. Since it is based on physical principles, its origin goes back to the origin of those principles and its development is closely linked to the advances in mechanics. Nevertheless, it was not until the invention of the steam engine that it became one of the pillars of the development of the industry.
Lihat Lebih BanyakThe Industrial Revolution of the seventeenth century took place as a result of the creation of this device. From that moment, with the contributions of scientists and engineers as important as Watt, Stephenson, Tesla or Rankine, an unprecedented renewal of both concept and development of new machines began.
The concept of industry, as it was known till that moment, changed with the development of those machines. Mass production was implemented, machine designs were improved and, consequently, the range of production processes increased, resulting in an unthinkable variety of new products adapted to the needs of society.
Within the mechanical engineering, it is worth mentioning the following fields of study and application:
- Mechanisms.
- Structures.
- Dynamics.
- Vibrations.
- Oscillations.
At present, any industry, from food to aerospace, must be at the highest level of technological innovation. Therefore, research and development of new devices is particularly important to always have the latest technology and to be at the level required by the industry 4.0.
Lihat Produk
Materi Terkait
TEKNIK MESIN UNITS
7.1.3.- STATICS AND DYNAMICS
CGU
The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...
7.1.3.- STATICS AND DYNAMICS
MED
Static and Dynamic Balancing Unit
The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...
7.1.3.- STATICS AND DYNAMICS
MES
Simple Balancing Unit
The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...
7.1.3.- STATICS AND DYNAMICS
MIF
Inertia Flywheel Unit
The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...
7.1.3.- STATICS AND DYNAMICS
MRYE1
Wheel and Axle Unit
The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...
7.1.3.- STATICS AND DYNAMICS
MRYE2
Wheel and Differential Axle Unit
The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...
7.1.3.- STATICS AND DYNAMICS
MELH
Unit for studying Hooke's Law
The Unit for studying Hooke's Law, "MELH", demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring – mass system.The...
7.1.3.- STATICS AND DYNAMICS
MSHU
Simple Harmonic Motion Unit
This Simple Harmonic Motion Unit, "MSHU", allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a support that allows...
7.1.3.- STATICS AND DYNAMICS
SRI
Unit to Study Rotational Inertia
The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...
7.1.4.- GETARAN DAN OSILASI
MEVTC
Computer Controlled Torsional Vibration Unit
The Computer Controlled Torsional Vibration Unit, "MEVTC" is designed to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with one, two or three...
7.1.4.- GETARAN DAN OSILASI
MVRE
Vibration of Coil Spring Unit
The Vibration of Coil Spring Unit, "MVRE", unit has been designed to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion. In this sense, the unit consists of a rigid...
7.1.4.- GETARAN DAN OSILASI
MVL
Free Vibration Unit
The Free Vibration Unit, "MVL", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be made to the...