Are you a teacher or do you work as an engineering researcher? EDIBON offers courses for teachers and #research staff. Take a look at the course of Fluid Mechanics and learn about #fluids properties. #DiscoverEdibon #Engineering.
AMGP Assembly and Maintenance of a Gear Pump Unit
SISTEM INOVATIF
The gear pumps belong to the group of positive displacement, rotary piston pumps, which produce flow by transporting the fluid betweenthe teeth of two coupled gears.
BERITA TERKAIT
GAMBARAN UMUM
The gear pumps belong to the group of positive displacement, rotary piston pumps, which produce flow by transporting the fluid betweenthe teeth of two coupled gears.
One of them is driven by the shaft of the pump (driving shaft), which turns the other one. The gear pumpoperates by the displacement principle - a pinion is driven and rotates the other one in the opposite direction. The filled teeth transport theliquid along the housing wall into the drive chamber.
In the intake chamber, the meshing pinions transport the liquid out of the teeth andprevent the liquid from flowing back. The most important application of this type of pumps includes oleodynamic systems, since they canwork with both low and high viscosity fluids. This type of pumps is only suitable for transporting fluids with no solid particles.
PERALATAN SIMILAR TERSEDIA
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMCP
The centrifugal pumps belong to the group of rotodynamic pumps, where the fluid is boosted thanks to the acceleration acquired whenpassing through the operating impeller. This acceleration, which starts from the center of the impeller and goes to...
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMMCP
Assembly and Maintenance of a Multistage Centrifugal Pump Unit
The multistage centrifugal pumps belong to the group of rotodynamic pumps, where the water is driven by centrifugal forces caused by the rotational movement of the impeller. Multi-stage centrifugal pumps can increase its lifting height, depending...
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMSP
Assembly and Maintenance of a Screw Pump Unit
The screw pumps belong to the group of positive displacement pumps, which use aneccentric helical screw (rotor) that moves inside a sleeve (stator), making the liquid flowbetween the screw and the sleeve. The most important applications of this...
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMDP
Assembly and Maintenance of a Diaphragm Pump Unit
Membrane pumps or diaphragm pumps belong to the group of positive displacement pumps, where the pressure increase is obtained by pushing elastic walls, known as, membranes or diaphragms, which change the volume of the chamber. Retention valves,...
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMPP
Assembly and Maintenance of a Piston Pump Unit
The piston pumps belong to the group of positive displacement pumps, where there are one or several fixed cavities whose volume can be changed due to the effect of a piston. The movement of the fluid is discontinuous and the charge and discharge...
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMLCP
Assembly and Maintenance of an In-Line Centrifugal Pump Unit
The centrifugal in-line pumps belong to the rotodynamic pump group, these pumps are the most used currently to pump liquids in general. In-line pumps are installed in straight pipes, and the main difference with a standard pump is that the suction...
PERALATAN KOMPLEMENTER
8.9.2.- MODEL YANG DAPAT DILEPASKAN
ASV
Assembly of a Shut-Off Valve Unit
The Assembly of a Shut-Off Valve Unit, "ASV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts list and the...
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMCV
Assembly of a Motorized Control Valve Unit
The Assembly of a Motorized Control Valve Unit, "AMCV" is a ball motorized control valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit,...
8.9.2.- MODEL YANG DAPAT DILEPASKAN
ACPV
Assembly of a Control Pneumatic Valve Unit
The Assembly of a Control Pneumatic Valve Unit, "ACPV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts...
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMP
Assembly and Maintenance of Pumps
The different sets for the assembly and maintenance of pumps have all the parts in a case for an easy transport, facilitating the clearidentification of all the components and allowing the systematic assembly and disassembly, maintenance and...
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMCP
Assembly and Maintenance of a Centrifugal Pump Unit
The centrifugal pumps belong to the group of rotodynamic pumps, where the fluid is boosted thanks to the acceleration acquired whenpassing through the operating impeller. This acceleration, which starts from the center of the impeller and goes to...
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMMCP
Assembly and Maintenance of a Multistage Centrifugal Pump Unit
The multistage centrifugal pumps belong to the group of rotodynamic pumps, where the water is driven by centrifugal forces caused by the rotational movement of the impeller. Multi-stage centrifugal pumps can increase its lifting height, depending...
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMSP
Assembly and Maintenance of a Screw Pump Unit
The screw pumps belong to the group of positive displacement pumps, which use aneccentric helical screw (rotor) that moves inside a sleeve (stator), making the liquid flowbetween the screw and the sleeve. The most important applications of this...
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMDP
Assembly and Maintenance of a Diaphragm Pump Unit
Membrane pumps or diaphragm pumps belong to the group of positive displacement pumps, where the pressure increase is obtained by pushing elastic walls, known as, membranes or diaphragms, which change the volume of the chamber. Retention valves,...
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMPP
Assembly and Maintenance of a Piston Pump Unit
The piston pumps belong to the group of positive displacement pumps, where there are one or several fixed cavities whose volume can be changed due to the effect of a piston. The movement of the fluid is discontinuous and the charge and discharge...
8.9.2.- MODEL YANG DAPAT DILEPASKAN
AMLCP
Assembly and Maintenance of an In-Line Centrifugal Pump Unit
The centrifugal in-line pumps belong to the rotodynamic pump group, these pumps are the most used currently to pump liquids in general. In-line pumps are installed in straight pipes, and the main difference with a standard pump is that the suction...
KUALITAS

LAYANAN PURNA JUAL
