Are you a teacher or do you work as an engineering researcher? EDIBON offers courses for teachers and #research staff. Take a look at the course Basic Mechanics and learn about #forces and vectors. #DiscoverEdibon #Engineering.
MARP Параболическая арка
ИННОВАЦИОННЫЕ СИСТЕМЫ
The Parabolic Arch Unit, "MARP", allows to study an isostatic (or statically determinate) parabolic arch (having one fixed support and one movable support) or a hyperstatic (or statically indeterminate) parabolic arch (having both supports fixed) under load, the deformations generated and the reactions of the supports of the arch.
Расширения
НОВОСТИ ПО ТЕМЕ
ОБЩЕЕ ОПИСАНИЕ
The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.
One support of the arch is fixed whereas the other support can be fixed or movable in horizontal direction. When both supports are fixed, the hyperstatic arch conditions will be studied (1 degree of freedom), whereas if one of the supports is movable, the isostatic arch conditions will be analyzed (0 degrees of freedom).
To fix the movable support, so that it works as a fixed support, a set of weights is used to cancel out the horizontal displacement and another set of weights to balance the vertical reaction of the support.
To measure the deformation of the arch under load the unit has two dial gauges, one that measures the horizontal displacement of the free support and another that measures the bending of the arch.
УПРАЖНЕНИЯ И ПРИМЕРЫ С ИНСТРУКЦИЯМИ
РУКОВОДСТВО ПО ПРАКТИЧЕСКИМ УПРАЖНЕНИЯМ ВКЛЮЧЕНО В РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
- Study of the mechanical principles of a parabolic arch.
- Differences between an isostatic arch and a hyperstatic arch.
- Analysis of the arch under load: Measurement of the deformations. Measurement of the reactions of the supports in the hyperstatic arch.
- Influence of a point load or an evenly distributed load on the reactions at the support and on the deformation of the arch.
- Evaluation of the relation between applied load and horizontal displacement.
- Comparison of the horizontal displacement with theoretical values.
- Analysis of the horizontal thrust.
ДОПОЛНИТЕЛЬНОЕ ОБОРУДОВАНИЕ
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MFPG
The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MVS
Устройство висящего моста
The Suspension Bridge Unit, "MVS", consists of a deck and two parallel main cables that simulate a suspension bridge and allow the study of stress in the main cables. The deck of the bridge is simulated by a light alloy beam that is held by both...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MART
Трёхузловая арка
The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MFBS
Устройство изучения сил в системе простых балок
The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MFCS1
Устройство для изучения сил в различных плоских фермах
The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the experimental bar forces...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MFCS2
Устройство изучения сил в жёстких фермах
The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in the single plane...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MFCS3
Устройство для изучения деформации в каркасах
The Unit for studying Deformation of Trusses, "MFCS3", allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the experimental forces in the...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MCPG
Установка олстостенного цилиндра
In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MFL
Устройство двухшарнирной арки
The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MPO
Устройство портальной рамы
The Portal Frame Unit, "MPO", allows to perform vertical deflection and horizontal deflection measurements in a fixed rectangular portal frames.To carry out the deflection tests, a series of loads with different weight must be applied to the...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
STH
Оборудование для гипотез напряжений
The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MEPE
Устройство для изучения проблем устойчивости
The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...