6.1.1.- КОНТРОЛЬ

ПРОДУКТЫ КОНТРОЛЬ

Показано 1-28 из 28

BASIC TEACHING UNIT FOR THE STUDY OF REGULATION AND CONTROL - RYC/B

RYC/B

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC/B

Оборудование для Основ Управления и Регулирования PID

The regulation of dynamic systems is a fundamental component of engineering, as it allows process variables to be maintained within desired limits despite external disturbances or internal changes. To achieve this, control strategies such as the...

COMPUTER CONTROLLED MODULAR CONTROL AND REGULATION UNIT - RYC/T

RYC/T

Available

10.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC/T

Модульное оборудование для регулирования и управления, управляемое компьютером (ПК)

The Computer Controlled Modular Control and Regulation Unit, with SCADA and PID Control, "RYC/T", has been designed by EDIBON for the study of regulation and automatic control through experimentation with real processes and dynamic models. It...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF REGULATION AND CONTROL - RYC

Аксессуар RYC/T

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC

Оборудование для изучения регулирования и управления, управляемое компьютером (ПК)

Аксессуар RYC/T

The Computer Controlled Teaching Unit for the Study of Regulation and Control, "RYC", is designed by EDIBON is common to all "RYC" type unit and constitutes the base unit for performing regulation and automatic control practices. It is organized...

Аксессуар RYC, RYC/T

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC-BB

Оборудование для PID-управления и регулирования системы «Шар-Балка»

Аксессуар RYC, RYC/T

The PID Control and Regulation Unit of a Ball and Beam System, "RYC-BB", designed by EDIBON allows the study of a classical unstable dynamic process in automatic control. It consists of a beam driven by a motor that regulates its inclination, on...

Аксессуар RYC, RYC/T

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC-SM

Оборудование для PID-регулирования и контроля сервомотора постоянного тока

Аксессуар RYC, RYC/T

The PID Control and Regulation of a DC Servomotor Unit, "RYC-SM", designed by EDIBON, allows studying speed and position control in a DC servomotor. It includes speed and position sensors, allowing analysis of the dynamic response of the motor and...

AIR FLOW TEMPERATURE CONTROL MODULE - RYC-TAR

Аксессуар RYC, RYC/T

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC-TAR

Оборудование для PID-регулирования и контроля температуры потока воздуха

Аксессуар RYC, RYC/T

The PID Temperature Control and Regulation of Air Flow Unit, "RYC-TAR", designed by EDIBON, allows studying temperature control in an air flow using a fan and a heating element. It includes sensors distributed along the duct, allowing analysis of...

INVERTED PENDULUM CONTROL MODULE - RYC-PI

Аксессуар RYC, RYC/T

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC-PI

Оборудование для PID-управления и регулирования Инвертированного Маятника

Аксессуар RYC, RYC/T

The PID Control and Regulation of an Inverted Pendulum Unit, "RYC-PI", designed by EDIBON, allows studying a highly unstable process through the control of an inverted pendulum mounted on a moving carriage. It includes position and angle sensors...

MAGNETIC LEVITATION CONTROL MODULE - RYC-CLM

Аксессуар RYC, RYC/T

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC-CLM

Оборудование для PID-регулирования и контроля магнитной левитации

Аксессуар RYC, RYC/T

The PID Magnetic Levitation Control and Regulation Unit, "RYC-CLM", designed by EDIBON, allows studying a highly nonlinear process through the levitation of a metallic ball using an electromagnet. It includes position and current sensors that...

WATER FLOW TEMPERATURE CONTROL MODULE - RYC-TAG

Аксессуар RYC, RYC/T

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC-TAG

Оборудование для PID-регулирования и контроля температуры потока воды

Аксессуар RYC, RYC/T

The PID Temperature Control and Regulation of Water Flow Unit, "RYC-TAG", designed by EDIBON, allows analyzing heat transfer in a water flow system. It includes two circuits (cold and hot water) connected through a heat exchanger. It allows...

Аксессуар RYC, RYC/T

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC-TE

Оборудование для PID-регулирования и контроля температуры

Аксессуар RYC, RYC/T

The PID Temperature Control and Regulation Unit, "RYC-TE", designed by EDIBON, allows studying temperature control in a tank using a heating element and temperature sensors. It allows analyzing thermal dynamics, response time, and process stability.

Аксессуар RYC, RYC/T

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC-P

Оборудование для PID-регулирования и контроля уровня давления

Аксессуар RYC, RYC/T

The PID Control and Regulation of Pressure Level Unit, "RYC-P", designed by EDIBON, allows the study of pressure control in a tank using compressed air. It includes a compressor, pressure sensors, and control valves. It allows analyzing the...

Аксессуар RYC, RYC/T

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC-N

Оборудование для PID-регулирования и контроля уровня

Аксессуар RYC, RYC/T

The PID Level Control and Regulation Unit, "RYC-N", designed by EDIBON, allows studying level control in a tank by regulating the inlet flow. It includes level sensors, a pump, and valves that allow modifying operating conditions. The unit allows...

Аксессуар RYC, RYC/T

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC-C

Оборудование для PID-регулирования и контроля расхода

Аксессуар RYC, RYC/T

The PID Flow Control and Regulation Unit, "RYC-C", designed by EDIBON, allows the study of flow control in a closed hydraulic circuit. It includes a pump, a flowmeter, and an electronic proportional valve that regulates the flow. The unit allows...

Аксессуар RYC, RYC/T

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC-I

Оборудование для PID-регулирования и контроля освещённости

Аксессуар RYC, RYC/T

The PID Control and Regulation of Light Intensity Unit, "RYC-I", designed by EDIBON, allows analyzing light intensity control in a closed environment. It includes a variable light source and several optical sensors, such as photodiodes or...

Аксессуар RYC, RYC/T

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC-pH

Оборудование для PID-регулирования и контроля уровня pH

Аксессуар RYC, RYC/T

The PID Control and Regulation of pH Level Unit, "RYC-pH", designed by EDIBON, allows studying pH control in a tank by dosing acidic and basic solutions. It includes pH sensors, dosing pumps, and a mixing tank. It allows analyzing dynamic chemical...

Аксессуар RYC, RYC/T

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

RYC-CP

Оборудование для PID-регулирования и контроля положения двигателя

Аксессуар RYC, RYC/T

The PID Position Control and Regulation of a Motor Unit, "RYC-CP", designed by EDIBON, allows studying linear position control using a DC motor that moves a carriage. It includes position sensors that allow measuring the displacement of the...

COMPUTER CONTROLLED GENERATING STATIONS CONTROL AND REGULATION SIMULATOR - SCE

Available

6.1.1.1.- ТЕОРЕТИЧЕСКИЕ И ПРАКТИЧЕСКИЕ ОСНОВЫ

SCE

Оборудование для Регулирования и Управления Электростанциями, Управляемая компьютером (ПК)

The Computer Controlled Power Plants Regulation and Control Unit, "SCE", has been designed by EDIBON to simulate and analyze the behavior of a power plant through two operating modes.Real mode: allows the analysis and data acquisition of the...

CECI

Available

6.1.1.2.- ПРОМЫШЛЕННЫЕ КОНТРОЛЛЕРЫ

CECI

Оборудование для промышленных контроллеров

The Industrial Controllers Unit, "CECI", is based on a modular design structure whose functionality is divided into different modules toallow the student a better understanding of the unit. The modules included in the unit are: industrial...

INDUSTRIAL CONTROLLERS NETWORKING - CRCI

CRCI

Available

6.1.1.2.- ПРОМЫШЛЕННЫЕ КОНТРОЛЛЕРЫ

CRCI

Cеть промышленных контроллеров

The Industrial Controllers Networking, "CRCI", unit is based on a modular design structure whose functionality is divided into different modules to allow the student a better understanding of the unit. The modules provided with the unit are: two...

COMPUTER CONTROLLED CONTROLLER TUNING UNIT - CEAC

CEAC

Available

6.1.1.2.- ПРОМЫШЛЕННЫЕ КОНТРОЛЛЕРЫ

CEAC

Оборудование для настройки контроллеров, управляемое с компьютера (ПК)

The Computer Controlled Controller Tuning Unit, "CEAC", designed by EDIBON, unit is an advanced system that operates in conjunction with a computer, which allows to change the control parameters performed by the industrial controller.Through the...

CEAB

Available

6.1.1.2.- ПРОМЫШЛЕННЫЕ КОНТРОЛЛЕРЫ

CEAB

Оборудование для применений с полевой шиной

The Field Bus Applications Unit, "CEAB", designed by EDIBON, provides the components to conform a real Profibus DP Network where the PC is the master device and different components included with the unit are the slave devices. The "CEAB" unit...

COMPUTER CONTROLLED COUPLED TANKS SYSTEM - CTAC

CTAC

Available

6.1.1.3.- CИСТЕМЫ ПРОМЫШЛЕННОГО ПРИМЕНЕНИЯ

CTAC

Система Связанных Резервуаров, Управляемая компьютером (ПК)

The Computer Controlled Coupled Tanks System, "CTAC", consists of four transparent tanks, each with a pressure sensor to measure the water level.The coupling configuration between tanks can be modified by the use of computer controlled solenoid...

COMPUTER CONTROLLED PROCESS CONTROL (ELECTRONIC VALVE) - UCP

Available

6.1.1.3.- CИСТЕМЫ ПРОМЫШЛЕННОГО ПРИМЕНЕНИЯ

UCP

Управление Процессами (Электронный Клапан), Управляемое компьютером (ПК)

The Computer Controlled Process Control (Electronic Valve), "UCP", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH, conductivity and...

COMPUTER CONTROLLED PROCESS CONTROL (PNEUMATIC VALVE) - UCPCN

UCPCN

Available

6.1.1.3.- CИСТЕМЫ ПРОМЫШЛЕННОГО ПРИМЕНЕНИЯ

UCPCN

Управляемыйкомпьютером блок управления процессом (пневматический клапан)

The Computer Controlled Process Control (Pneumatic Valve), "UCPCN", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH, conductivity and...

COMPUTER CONTROLLED PROCESS CONTROL (SPEED CONTROLLER) - UCPCV

UCPCV

Available

6.1.1.3.- CИСТЕМЫ ПРОМЫШЛЕННОГО ПРИМЕНЕНИЯ

UCPCV

Управление процессами (частотный преобразователь), управляемое компьютером (ПК)

The Computer Controlled Process Control Unit (Speed Controller), "UCPCV", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH,...

COMPUTER CONTROLLED PROCESS CONTROL UNIT (ELECTRONIC + PNEUMATIC VALVE AND SPEED CONTROLLER) - UCPCNCV

UCPCNCV

Available

6.1.1.3.- CИСТЕМЫ ПРОМЫШЛЕННОГО ПРИМЕНЕНИЯ

UCPCNCV

Управление процессами (электрический и пневматический клапан + вариатор), управляемое с ПК

The Computer Controlled Process Control System (with electronic control valve + pneumatic control valve + variable speed drive), "UCPCNCV", designed by EDIBON, allows the study of several types of automatic control and can be used to control...

COMPUTER CONTROLLED PROCESS CONTROL UNIT FOR THE STUDY OF PRESSURE (AIR) - UCP-P

UCP-P

Available

6.1.1.3.- CИСТЕМЫ ПРОМЫШЛЕННОГО ПРИМЕНЕНИЯ

UCP-P

Оборудование для управления процессами для изучения давления (воздух), управляемое компьютером (ПК)

The Computer Controlled Process Control Unit for the Study of Pressure (Air), "UCP-P", designed by EDIBON, consists of a compressed air duct whose flow is controlled by a pneumatic valve (the compressed air or gas source is not included).The air...

COMPUTER CONTROLLED INDUSTRIAL PROCESS CONTROL PLANT - CPIC

CPIC

Available

6.1.1.3.- CИСТЕМЫ ПРОМЫШЛЕННОГО ПРИМЕНЕНИЯ

CPIC

Промышленная система управления процессами, управляемая компьютером (ПК)

The Computer Controlled Industrial Process Control Plant, "CPIC", has been designed by EDIBON for the study of industrial process control through experimentation with variables such as flow, level, pressure, and temperature.This unit allows the...

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ