최고 판매자
Showing 433-468 of 921 item(s)
12 24 36
UNIT TO STUDY A SPUR GEAR CUTAWAY MODEL - SGCM
Available
7.4.1.- 섹션 모델
SGCM
Unit to Study a Spur Gear Cutaway Model
액세서리 CMTM
The Unit to Study a Spur Gear Cutaway Model provides insight into the operation of this transmission system, characterized by teeth parallel to the axis of rotation, allowing for direct power transmission with high efficiency.This type of gear is...
뷰 유닛
UNIT TO STUDY A TWO-STAGE SPUR GEAR CUTAWAY MODEL - SGCM/2
Available
7.4.1.- 섹션 모델
SGCM/2
Unit to Study a Two-Stage Spur Gear Cutaway Model
액세서리 CMTM
The Unit to Study a Two-Stage Spur Gear Cutaway Model provides an in-depth analysis of these systems, which utilize two pairs of spur gears in series to achieve greater speed reduction and more efficient torque transmission.These systems are...
뷰 유닛
UNIT TO STUDY A WORM GEAR CUTAWAY MODEL - WGCM
Available
7.4.1.- 섹션 모델
WGCM
Unit to Study a Worm Gear Cutaway Model
액세서리 CMTM
The Unit to Study a Worm Gear Cutaway Model provides insight into the operation of this transmission system, consisting of a helical worm screw and a circular cogwheel.This type of transmission is widely used in automatic doors, elevators, and...
뷰 유닛
UNIT TO STUDY ROTATIONAL INERTIA - SRI
  • SRI
Available
7.1.3.- 통계 및 역학
SRI
Unit to Study Rotational Inertia
The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...
뷰 유닛
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- 기계적 테스트
MUP
Universal Buckling Unit
The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
뷰 유닛
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- 기계적 테스트
EEU/20KN
Universal Material Testing Unit
The Universal Material Testing Unit, "EEU/20KN", designed by EDIBON, is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20...
뷰 유닛
UNSYMMETRICAL CANTILEVER UNIT - MVV
  • MVV
Available
7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)
MVV
Unsymmetrical Cantilever Unit
The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...
뷰 유닛
METACENTRIC HEIGHT DEMOSTRATION OF A "U" SHAPED FLOATING BODY - FME11-B
  • FME11-B
Available
8.1.3.- 수압
FME11-B
U모양 플로팅 개체의 메타 중심 높이 설명
The Metacentric Height Demostration of a "U" Shaped Floating Object, "FME11-B", designed by EDIBON, allows the study of the stability of a floating object by calculating its metacentric height starting from a U-shaped floating body.The unit...
뷰 유닛
U-SHAPE MANOMETER - HMM-U1000
  • 액세서리 HMM
Available
8.2.- 측정
HMM-U1000
U자형 마노미터
액세서리 HMM
The U-Shape Manometer, "HMM-U1000," designed by EDIBON, allows the study of various pressures and their relationship with the fluid. It measures the difference in liquid level in its columns, providing vital information for pressure analysis in...
뷰 유닛
VENTURI, BERNOULLI AND CAVITATION UNIT - FME22
  • FME22
Available
8.1.4.- 수압
FME22
Venturi, Bernoulli and Cavitation Unit
The Venturi, Bernoulli and Cavitation unit, "FME22", has been designed by EDIBON to demonstrate some of the practical possibilities that can be achieved with a Venturi tube.This unit is designed for demonstrating some practical possibilities with...
뷰 유닛
VIBRATION OF COIL SPRING UNIT - MVRE
  • MVRE
Available
7.1.4.- 진동 및 진동
MVRE
Vibration of Coil Spring Unit
The Vibration of Coil Spring Unit, "MVRE", has been designed by EDIBON to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion.In this sense, the unit consists of a...
뷰 유닛
VORTEX FLOW METER - FME30/I
  • FME30/I
Available
8.1.2.- 측정
FME30/I
Vortex Flow Meter
The Vortex Flowmeter, "FME30/I", designed by EDIBON, allows to perform different studies and experiments of various volumetric and mass flow measurement methods, as well as the comparison of continuous and discontinuous methods.This unit includes...
뷰 유닛
WATER HAMMER - FME15
  • FME15
Available
8.1.8.- 유압 파이프
FME15
Water Hammer
With the Water Hammer unit, "FME15", designed by EDIBON, we can demonstrate the effects of the instantaneous or gradual variation of the velocity of a fluid.The water hammer phenomenon, which appears as a consequence of a rapid change in the...
뷰 유닛
WATER HEATERS TRAINING UNIT - WHT
  • WHT
Available
9.2.- 난방, 환기, 에어컨 및 온수
WHT
Water Heaters Training Unit
The Water Heater Training Unit, "WHT", allows demonstrating the operation of three types of water heaters. The unit has three heaters, two of them commercial one with electronic ignition and one in millivolt, and a residential gas heater without...
뷰 유닛
WHEEL AND DIFFERENTIAL AXLE UNIT - MRYE2
  • MRYE2
Available
7.1.3.- 통계 및 역학
MRYE2
Wheel and Differential Axle Unit
The Wheel and Differential Axle Unit, "MRYE2", has been designed by EDIBON to investigate the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...
뷰 유닛
WIND ENERGY BASIC UNIT - MINI-EEE
  • MINI-EEE
Available
5.3.3.- 풍력 에너지
MINI-EEE
Wind Energy Basic Unit
The Wind Energy Basic Unit, "MINI-EEE", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up to six blades and a...
뷰 유닛
WIND ENERGY UNIT - EEE
  • EEE
Available
5.3.3.- 풍력 에너지
EEE
Wind Energy Unit
The Wind Energy Unit, "EEE", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The unit consists of a...
뷰 유닛
WORM AND WHEEL UNIT - MTSF
  • MTSF
Available
14.1.2.2.- 기어
MTSF
Worm and Wheel Unit
The Worm and Wheel Unit, "MTSF", designed by EDIBON, allows to demonstrate the principle of a worm gear.The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel.The worm and wheel are...
뷰 유닛
GAS POWER PLANTS SIMULATOR - PSV-GSPP-SOF
Available
5.1.3.1.- 발전
PSV-GSPP-SOF
가스 에너지 발전소 시뮬레이터
액세서리 PSV-PPSS
The PSV-GSPP-SOF software has been designed by EDIBON with the aim of showing the user the basic principles of operation of Brayton cycle gas turbine power plants, exposing in a didactic way the elements and parameters present in the generation...
뷰 유닛
GAS ABSORPTION COLUMN - CAG
  • CAG
Available
11.1.8.- 흡수 및 흡착
CAG
가스 흡수 컬럼
The Gas Absorption Column, "CAG", is a scale unit designed to study hydrodynamic and absorption processes in packed columns. This system absorbs ammonia or CO2 from a mixture with air in a watery solution that descends along the column.The main...
뷰 유닛
COMPUTER CONTROLLED GAS ABSORPTION COLUMN - CAGC
  • CAGC
Available
11.1.8.- 흡수 및 흡착
CAGC
가스 흡수 컬럼, 컴퓨터 제어 (PC)
The Computer Controlled Gas Absorption Column, "CAGC", is a scale unit designed to study hydrodynamic and absorption processes in packed columns. This system absorbs ammonia or CO2 from a mixture with air in a watery solution that flowing down the...
뷰 유닛
UNIT TO STUDY SIMPLE DRIVES ASSEMBLY - MSDA
  • MSDA
Available
14.1.2.2.- 기어
MSDA
간단한 변속기 조립 장비
The Simple Drives Assembly Unit, "MSDA", designed by EDIBON, allows the knowledge and learning of the fundamentals of the mechanical transmission technique, as well as the assembly, disassembly and experimentation with simple gears.The unit allows...
뷰 유닛
SIMPLE HYDRAULIC UNIT - MSH
  • MSH
Available
7.2.1.- 브레이크 및 클러치
MSH
간단한 유압 장비
The Simple Hydraulic Unit, "MSH", has been designed for studies related to mechanical engineering and motor vehicles. It is used to demonstrate how a liquid can be used to transmit a force.The unit can also be used to conduct experiments to study...
뷰 유닛
RIVER FLOW SIMULATOR - RFS
  • RFS
Available
13.1.- 수 문학 및 수 문학
RFS
강 유량 시뮬레이터
The River Flow Simulator, "RFS", designed by EDIBON, allows the simulation and study of the river features, included the flow and solid bed load motion.The main element is a rectangular tank made of stainless steel supported on a metal beam frame,...
뷰 유닛
SEDIMENT TRANSPORT DEMONSTRATION CHANNEL - CAS
  • CAS
Available
13.1.- 수 문학 및 수 문학
CAS
개방형 침전 채널
The Sediment Transport Demonstration Channel, "CAS", designed by EDIBON, consist of an inclinable channel mounted on a base plate, supported by two supports, with a discharge tank and recirculating pump. This tank is in the Basic Hydraulic Feed...
뷰 유닛
WIRING INSTALLATION TRAINING FOR MAINS CONNECTION AND METERS IN BUILDINGS - WIT-MCB
  • WIT-MCB
Available
4.4.3.- 설치 및 유지 관리 관행
WIT-MCB
건물 네트워크 연결 및 전력계 전기 배선 실습
The Wiring Installation Training, Mains Connection and Meters in Buildings application, "WIT-MCB", has been designed by Edibon for the students formation at a proffessional-practical level in the field of the installation, wiring and testing of...
뷰 유닛
WIRING INSTALLATION TRAINING FOR ELECTRICAL INSTALLATIONS IN BUILDINGS - WIT-EIB
  • WIT-EIB
Available
4.4.3.- 설치 및 유지 관리 관행
WIT-EIB
건물 전기 배선 실습
The Wiring Installation Training, Electrical Installations in Buildings application, "WIT-EIB", has been designed by EDIBON for the students formation at a professional-practical level in the field of the installation, wiring and testing of...
뷰 유닛
STAND-ALONE PHOTOVOLTAIC APPLICATION - AEL-SAPV
  • AEL-SAPV
Available
5.3.1.- 광전지 태양 에너지
AEL-SAPV
격리형 태양광 전력 시스템 응용
The Stand-Alone Photovoltaic Application, "AEL-SAPV", has been designed by EDIBON to study the energy production obtained with photovoltaic panels.This application will provide the user with the knowledge and the essential skills about the...
뷰 유닛
COUPLING MECHANISM - MAC
  • MAC
Available
7.1.2.1.- 메커니즘
MAC
결합 메커니즘
The Coupling Mechanism, "MAC", represents a simple Oldham type coupling. The lateral displacement of the input and output shafts may be varied and circular scales are fitted to the input and output flanges.It consists of two outer discs made of...
뷰 유닛
ADVANCED AC ELECTRICAL MOTORS APPLICATION - AEL-ACEMT
  • AEL-ACEMT
Available
4.3.2.1.- 교류 전기 모터 및 발전기
AEL-ACEMT
고급 교류 전동기 응용
The Advanced AC Electrical Motors Application, "AEL-ACEMT", has been designed by Edibon to carry out electrical/mechanical test for a great variety of AC motors. Such tests allow obtaining the most significant electrical and mechanical...
뷰 유닛
ADVANCED POWER FACTOR COMPENSATION APPLICATION - AEL-EECFP
  • AEL-EECFP
Available
5.1.3.3.- 력 및 부하 분배
AEL-EECFP
고급 전력 인수 조절 응용
Industrial customers use three-phase power consumption with different power factors. If their power factor drops below a prescribed value, power losses in transmission lines increase. For this reason, the customers have to pay a penalty. In order...
뷰 유닛
COMPUTER CONTROLLED ADVANCED POWER ELECTRONICS APPLICATION - AE-PEC
  • AE-PEC
Available
2.4.3.- 전력 전자
AE-PEC
고급 전력 전자 응용, 컴퓨터(PC) 제어
The Computer Controlled Advanced Power Electronics Application, "AE-PEC", includes various modules that allow exploration of different aspects of power electronics. The modular design of this application ensures flexibility and adaptability to...
뷰 유닛
정보 요청