On December 1st, the Repair Course for Small Laboratory Equipment, taught by our engineers at the EDIBON facilities, was completed, lasting 4 days.
The attendees, (Laboratory technicians and maintenance of the Rey Juan Carlos University of Madrid) had the opportunity to perform multiple...
AEL-SERIN/CA-1KW 1kW 규모의 산업용 교류 서보 모터 응용
혁신적인 시스템
The 1 kW AC Industrial Servomotor Application, "AEL-SERIN/CA-1KW", has been designed to study the working principle and control of industrial servomotors.
관련 뉴스
일반적인 설명
The 1 kW AC Industrial Servomotor Application, "AEL-SERIN/CA-1KW", has been designed to study the working principle and control of industrial servomotors.
The "AEL-SERIN/CA-1KW" allows the user to acquire knowlegde and experience in the control of the mechanical parameters of a servomotor.For this purpose, the application includes a servomotor along with its control module and two digital meters to monitor speed and torque values throughout the whole process.
In addition, once this knowledge has been acquired the user will be able, if desired, to carry out manual tests for rotating electrical machines with the goal of setting different operating conditions to obtain its characteristic curves and parameters.
In order to carry out advanced electrodynamic tests for rotating electrical machines, it is recommended to acquire the Control and Data Acquisition System Software for Electrical Machines, "EM-SCADA". This advanced software allows monitoring waveforms for voltage, current, torque and speed for the in-depth study of the electrical machines to be tested.
연습 및 가이드
매뉴얼에 포함 된 가이드 실기 연습
- Wiring and starting up the AC servomotor.
- Start/Stop operations of the servomotor.
- Speed control operation.
- Torque control operation.
- Warnings through alarm.
장비로 수행 할 수있는 더 많은 실용적 연습
Additional practical possibilities with the additional recommended elements:
- Real time torque monitoring (EM-SCADA is required).
- Real time speed monitoring (EM-SCADA is required).
- Real time monitoring of current and voltage RMS values (EM-SCADA is required).
- Real time monitoring of current and voltage waveforms (EM-SCADA is required).
- Advanced electrodynamic study of the machine (EM-SCADA is required).
- Automatic braking test and monitoring of the results (EM-SCADA is required).
- Obtaining the characteristic curves of the machine (torquespeed, torque-current, etc) (EM-SCADA is required).
- Saving and comparison of results (EM-SCADA is required).
- Start-up of the electrical machine coupled to the servomotor (AEL-DCEMA and/or AEL-ACEM is required (at least one)).
- Introducing the braking torque (AEL-DCEMA and/or AEL-ACEM is required (at least one)).
- Monitoring of the electrical and mechanical parameters of the rotating machine under different operating conditions (AEL-DCEMA and/or AEL-ACEM is required (at least one)).
- Electrodynamic study of the machine (AEL-DCEMA and/or AEL-ACEM is required (at least one)).
- Obtaining the characteristic curves of the machine by means of manually controlled braking tests (torque-speed, torquecurrent, etc.) (AEL-DCEMA and/or AEL-ACEM is required (at least one)).
비슷한 제품
6.1.2.2.- 전력 전자 및 산업 전자
SERIN/CC
The Computer Controlled Advanced Industrial Servosystem Unit (for DC Motors), "SERIN/CC", allows different practices related to servomotors to be carried out. The unit has different modules to develop different experiments. The modules included in...
6.1.2.2.- 전력 전자 및 산업 전자
SERIN/CA
Computer Controlled Advanced Industrial Servosystems Unit (for AC Motors)
The "SERIN/CA" trainer consists on a Control Interface Box connected to a three-phase motor and to a computer (computer not included). The control interface has a resolver for three-phase motors that controls the speed, position and currentof the...
6.1.2.2.- 전력 전자 및 산업 전자
SERIN/CCB
Servosystems Basic Unit for DC Motors
"SERIN/CCB" is an unit whose goal is studying low power servo systems. It is a low power DC motor speed control trainer that has a breakdown simulator. This trainer is a basic version of the Advanced and Computerised "SERIN/CC" Trainer, being...
보완 장비
6.1.2.2.- 전력 전자 및 산업 전자
TECNEL
Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS)
The Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS), "TECNEL" is a unit with Computer Control and Data Acquisition System designed to study the basis of Power Electronics. It allows students to study AC/DC, DC/AC,...
6.1.2.2.- 전력 전자 및 산업 전자
TECNEL/B
Computer Controlled Basic Teaching Unit for the Study of Power Electronics (no IGBTS). (Converters: AC/DC+AC/AC)
The Computer Controlled Basic Teaching Unit for the Study of Power Electronics (no IGBTS). (Converters: AC/DC+AC/AC), "TECNEL/B", is a unit with Computer Control and Data Acquisition System designed to study the basis of Power Electronics. It...
6.1.2.2.- 전력 전자 및 산업 전자
SERIN/CC
Computer Controlled Advanced Industrial Servosystem Unit (for DC Motors)
The Computer Controlled Advanced Industrial Servosystem Unit (for DC Motors), "SERIN/CC", allows different practices related to servomotors to be carried out. The unit has different modules to develop different experiments. The modules included in...
6.1.2.2.- 전력 전자 및 산업 전자
SERIN/CCB
Servosystems Basic Unit for DC Motors
"SERIN/CCB" is an unit whose goal is studying low power servo systems. It is a low power DC motor speed control trainer that has a breakdown simulator. This trainer is a basic version of the Advanced and Computerised "SERIN/CC" Trainer, being...
6.1.2.2.- 전력 전자 및 산업 전자
SERIN/CA
Computer Controlled Advanced Industrial Servosystems Unit (for AC Motors)
The "SERIN/CA" trainer consists on a Control Interface Box connected to a three-phase motor and to a computer (computer not included). The control interface has a resolver for three-phase motors that controls the speed, position and currentof the...
5.3.3.- 풍력 에너지
AEL-WPP
Wind Power Plants with Double Feed Induction Generator Application
The Wind Power Plants with Double Feed Induction Generator Application, "AEL-WPP", is used to investigate the design and operation of modern wind power stations. The "AEL-WPP" consists of a prime motor that moves a double-feed induction generator...
5.3.3.- 풍력 에너지
AEL-WPPIC
컴퓨터로 제어되는 유도 발전기 풍력 발전소 응용
The Computer Controlled Wind Power Plants Application with Induction Generator, "AEL-WPPIC", has been designed by EDIBON to study of the main characteristics and behavior of the induction generators used in wind turbines which inject the generated...
5.3.3.- 풍력 에너지
AEL-WPPI
유도 발전기 풍력 발전소 응용
The Wind Power Plants with Induction Generator Application, "AEL-WPPI", has been developed by EDIBON to study the wind turbines electrical performance with three-phase induction generators of squirrel cage that inject power in the network.Wind...
5.1.3.2.- 전력 전송
AEL-PWEC
전력전자학 응용, SCADA 포함
The Power Electronics Application, with SCADA, "AEL-PWEC", has been designed to study the most important applications related to DC power electronics, single-phase AC power electronics, three-phase AC power electronics and thyristor power...