11.1.- OPERASI UNIT

Operasi unit adalah masing-masing dari perubahan fisik yang terjadi dalam proses industri kimia. Mereka muncul dari studi tentang proses kimia yang berbeda di mana operasi yang berbeda tampaknya dilakukan tetapi mereka memiliki dasar yang sama.

Lihat Lebih Banyak

Operasi ini dapat dibagi menjadi tiga jenis:

  • Transfer massal. Perubahan massa atau komposisi materi, yang mungkin termasuk perubahan kimia. Operasi tersebut adalah distilasi, penyerapan, adsorpsi, ekstraksi dan pertukaran ion, di yang sebagian besar perubahannya bersifat fisik.
  • Transfer energi. Perubahan energi yang, misalnya, dapat diartikan sebagai perubahan keadaan karena perubahan tekanan dan/atau suhu. Klasifikasi ini mencakup penguapan, meskipun operasi lain yang menggabungkan transfer energi dengan transfer massa (pengeringan, liofilisasi, sublimasi, kristalisasi dan pelembab) juga disertakan.
  • Transfer momentum. Perubahan kondisi kinetik materi. Operasi yang melibatkan perubahan kinetik adalah filtrasi, sedimentasi, flotasi, dan sentrifugasi .

Semuanya secara eksperimental berdasarkan pada hukum konservasi yang sesuai.

Jenis operasi ini digunakan di banyak industri. Ini adalah dasar dari berbagai proses dari berbagai bidang aplikasi, seperti misalnya industri makanan, industri energi, dll.

Lihat Produk
OPERASI UNIT UNITS
1.- FISIKA 2.- ELEKTRONIKA 3.- KOMUNIKASI 4.- LISTRIK 5.- ENERGI 6.- MEKATRONIK & OTOMASI 7.- MEKANIKA 8.- MEKANIKA FLUIDA 9.- TERMODINAMIK DAN TERMOTEKNIK 10.- PENGENDALIAN PROSES 11.- TEKNIK KIMIA 12.- TEKNOLOGI PANGAN & AIR 13.- LINGKUNGAN HIDUP 14.- TEKNIK BIOMEDIS AKSESORIS LABORATORIUM PABRIK PILOT SESUAI PESANAN
11.1.- OPERASI UNIT 11.2.- REAKTOR KIMIA
11.1.1.- FLUIDIZATION 11.1.2.- PENGUAPAN 11.1.3.- MENDIDIH 11.1.4.- DISTILASI DAN RETAK 11.1.5.- EKSTRAKSI 11.1.6.- DIFUSI 11.1.7.- PENGERINGAN DAN PENDINGINAN 11.1.8.- PENYERAPAN DAN ADSORPSI 11.1.9.- PERTUKARAN ION DAN KOROSI 11.1.10.- KRISTALISASI DAN PIROLISIS 11.1.11.- FILTRASI, SEDIMENTASI, DAN PENCAMPURAN 11.1.12.- PENGOBATAN SOLIDS
Menampilkan 13 -24 dari 84 produk
12 24 36
DOUBLE EFFECT RISING FILM EVAPORATOR - EDPAB
  • EDPAB
Available
11.1.2.- PENGUAPAN
EDPAB
Double Effect Rising Film Evaporator
The Double Effect Rising Film Evaporator, "EDPAB", designed by EDIBON, allows to observe and control a serial, parallel or double effect evaporation process.The unit consists of two evaporators with a single glass tube, allowing the student to...
Lihat Unit
COMPUTER CONTROLLED THIN FILM EVAPORATOR - EPFC
  • EPFC
Available
11.1.2.- PENGUAPAN
EPFC
Computer Controlled Thin Film Evaporator
The Computer Controlled Thin Film Evaporator "EPFC" has been designed to study (theoretical and practically) the different operating variables that influence the thin film evaporation process.The unit is formed by a thin film evaporator, a...
Lihat Unit
COMPUTER CONTROLLED BOILING HEAT TRANSFER UNIT - TCEC
  • TCEC
Available
11.1.3.- MENDIDIH
TCEC
Computer Controlled Boiling Heat Transfer Unit
The Computer Controlled Boiling Heat Transfer Unit, "TCEC", consists of a heating element horizontally mounted inside a vertical glass chamber submerged in coolant. This heating element is connected to a cylindrical copper sleeve in contact with...
Lihat Unit
BOILING HEAT TRANSFER UNIT - TCEB
  • TCEB
Available
11.1.3.- MENDIDIH
TCEB
Boiling Heat Transfer Unit
The Boiling Heat Transfer Unit, "TCEB", consists of a heating element horizontally mounted inside a vertical glass chamber submerged in coolant. This heating element is connected to a cylindrical copper sleeve in contact with the coolant. Attached...
Lihat Unit
COMPUTER CONTROLLED FLOW BOILING DEMONSTRATION UNIT - TFEC
  • TFEC
Available
11.1.3.- MENDIDIH
TFEC
Computer Controlled Flow Boiling Demonstration Unit
The Computer Controlled Flow Boiling Demonstration Unit, "TFEC", has as main component an experimental tube made of two glass concentric tubes. In these tubes two fluids flow crosscurrent: refrigerant, which flows by convection and in an...
Lihat Unit
FLOW BOILING DEMONSTRATION UNIT - TFEB
  • TFEB
Available
11.1.3.- MENDIDIH
TFEB
Flow Boiling Demonstration Unit
The Flow Boiling Demonstration Unit, "TFEB", has as main component an experimental tube made of two glass concentric tubes. In thesetubes two fluids flow crosscurrent: refrigerant, which flows by convection and in an ascendant way through the...
Lihat Unit
ADVANCED COMPUTER CONTROLLED CONTINUOUS DESTILLATION UNIT - UDCC/A
  • UDCC/A
Available
11.1.4.- DISTILASI DAN RETAK
UDCC/A
Advanced Computer Controlled Continuous Destillation Unit
The Advanced Computer Controlled Continuous Distillation Unit "UDCC/A" is an installation that allows the study of fractional distillation using a packed column which is able to operate with different packings.There is a feeding system that...
Lihat Unit
COMPUTER CONTROLLED CONTINUOUS DISTILLATION UNIT - UDCC
  • UDCC
Available
11.1.4.- DISTILASI DAN RETAK
UDCC
Unit Komputer Kontrol Destilasi Kontinu.
The Computer Controlled Continuous Distillation Unit, "UDCC", is basically composed by a boiler on which different types of columns can be adapted (plate columns and Raschig rings column). An eight plate column, a reflux system, a tank for...
Lihat Unit
CONTINUOUS DISTILLATION UNIT - UDCB
  • UDCB
Available
11.1.4.- DISTILASI DAN RETAK
UDCB
Unit Destilasi Kontinu.
The Continuous Distillation Unit, "UDCB", is formed by a boiler, on which different types of columns can be adapted (plate columns and Raschig columns). An eight plate column, a reflux system, a tank for distillation, a vacuum pump and a feeding...
Lihat Unit
COMPUTER CONTROLLED BATCH DISTILLATION UNIT - UDDC
  • UDDC
Available
11.1.4.- DISTILASI DAN RETAK
UDDC
Unit Komputer Kontrol Destilasi.
The Computer Controlled Batch Distillation Unit, "UDDC", is basically composed by a boiler on which different types of interchangeable columns can be adapted (plate columns and Raschig Rings column). An eight plate column, a reflux system and a...
Lihat Unit
Meminta informasi