6.- MEKATRONIK & OTOMASI

Mekatronika dan Otomasi adalah bidang teknik yang berfokus pada studi dan pengembangan permesinan untuk menerapkan otonom dan cerdas industri proses melalui komputer dan elektronik kontrol. Mesin ini dirancang untuk meningkatkan kontrol dan produktivitas proses industri, selain untuk memfasilitasi pekerjaan bagi manusia. Kontrol gerak mesin dan aktuator, kontrol waktu nyata dari suatu proses, dan otomatisasi PLC meningkatkan ketangkasan dan efisiensi terkait untuk produksi mesin, dan mengurangi semua tindakan yang tidak menambah nilai pada produk akhir atau memperpanjang proses.

Lihat Lebih Banyak

Kebutuhan industri untuk mengotomatiskan proses industri saat ini telah memungkinkan pengembangan elemen kontrol, seperti Programmable Logic Controllers (PLC) , yang meningkatkan kecepatan dan efisiensi proses sederhana dan proses industri lengkap. Penggabungan robot perakitan di jalur perakitan telah meningkatkan volume pekerjaan dan penyesuaian pada produksi. Selain itu, teknologi Kontrol Gerakan, seperti motor servo, memungkinkan untuk melakukan gerakan yang tepat pada posisi, kecepatan kontrol, atau torsi tertentu.

Perkembangan berkelanjutan dari teknologi mekatronika meletakkan dasar dari sistem produksi pintar, meningkatkan kualitas produk jadi sambil mempertahankan kualitas yang konstan, mendeteksi kesalahan di kanan waktu dan menyesuaikan produksi dengan pasar, meningkatkan produksi dan fleksibilitas mesin.

Lihat Produk
Materi Terkait
MEKATRONIK & OTOMASI SUBKATEGORI

6.1.- MEKATRONIK

Mekatronika adalah bidang teknik yang mencakup teknik mesin, teknik elektronik, dan teknik komputer. Tujuan utama mekatronika adalah otomatisasi mesin. Untuk mencapai tujuan ini, Industri Otomasi telah mengembangkan elektromekanis dan sistem terkomputerisasi untuk memiliki kontrol optimal atas...
lihat

6.2.- OTOMASI PLC

Otomatisasi adalah penggunaan sistem yang terkomputerisasi dan elektromekanis untuk mesin kontrol dan proses industri. Salah satu elemen yang dapat mengotomatiskan dan mengontrol proses adalah Programmable Logic Controllers (PLC). PLC adalah komputer industri kecil yang dirancang untuk bekerja di...
lihat
6.1.- MEKATRONIK 6.2.- OTOMASI PLC

MEKATRONIK & OTOMASI PERALATAN

1.- FISIKA 2.- ELEKTRONIKA 3.- KOMUNIKASI 4.- LISTRIK 5.- ENERGI 6.- MEKATRONIK & OTOMASI 7.- MEKANIKA 8.- MEKANIKA FLUIDA 9.- TERMODINAMIK DAN TERMOTEKNIK 10.- PENGENDALIAN PROSES 11.- TEKNIK KIMIA 12.- TEKNOLOGI PANGAN & AIR 13.- LINGKUNGAN HIDUP 14.- TEKNIK BIOMEDIS AKSESORIS LABORATORIUM PABRIK PILOT SESUAI PESANAN
6.1.- MEKATRONIK 6.2.- OTOMASI PLC
6.1.1.- KONTROL 6.1.2.- ELEKTRONIKA 6.1.3.- HIDROLIK DAN PNEUMATIKA 6.1.4.- PERANGKAT LUNAK MECHATRONICS 6.2.1.- OPSI PLC 6.2.2.- EMULATOR PERANGKAT KERAS 6.2.3.- INSTRUMENTASI DAN KONTROL DENGAN PLC 6.2.4.- APLIKASI INDUSTRI DENGAN PLC 6.2.5.- APLIKASI WORKSTATION DENGAN PLC 6.2.6.- SISTEM MANUFAKTUR FLEKSIBEL DENGAN PLC
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS 6.1.1.2.- PENGONTROL INDUSTRI 6.1.1.3.- APLIKASI SISTEM INDUSTRI 6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK 6.1.2.2.- ELEKTRONIK TENAGA DAN ELEKTRONIK INDUSTRI 6.1.3.1.- HIDROLIKA 6.1.3.2.- PNEUMATIKA 6.2.2.1.- SISTEM MANUFAKTUR 6.2.2.2.- TINGKAT DAN KONTROL ALIRAN 6.2.2.3.- TRANSPORTASI DAN KLASIFIKASI 6.2.2.4.- PENGENDALIAN MESIN LISTRIK 6.2.2.5.- PENGENDALIAN LALU LINTAS DAN PARKIR 6.2.2.6.- RUMAH DAN KANTOR 6.2.5.1.- APLIKASI WORKSTATION PARTS FEED 6.2.5.2.- APLIKASI WORKSTATION PROSES 6.2.5.3.- APLIKASI ROTASI WORKSTATION 6.2.5.4.- BAGIAN PENANGANAN APLIKASI WORKSTATION 6.2.5.5.- APLIKASI WORKSTATION ROBOTIC 6.2.5.6.- APLIKASI WORKSTATION IDENTIFIKASI BAGIAN 6.2.5.7.- APLIKASI WORKSTATION CNC 6.2.5.8.- APLIKASI WORKSTATION PENYIMPANAN
Menampilkan 169 -192 dari 211 produk
12 24 36
DRILLING WORKSTATION - AE-PLC-ST
  • AE-PLC-ST
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-ST

Stasiun Pengeboran

The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...
Lihat Unit
MOLDING WORKSTATION - AE-PLC-SMOLD
  • AE-PLC-SMOLD
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-SMOLD

Stasiun Pembentukan

The "AE-PLC-SMOLD" is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a molding process by punching the piece with...
Lihat Unit
CUTTING WORKSTATION - AE-PLC-SCOR
  • AE-PLC-SCOR
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-SCOR

Stasiun Pemotongan

The "AE-PLC-SCOR" is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine simulate the process.The "AE-PLC-SCOR"...
Lihat Unit
FILTRATION WORKSTATION - AE-PLC-FT
  • AE-PLC-FT
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-FT

Stasiun Penyaringan

The "AE-PLC-FT" is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the filter using a pump and different types of...
Lihat Unit
MIXING WORKSTATION - AE-PLC-MS
  • AE-PLC-MS
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-MS

Stasiun Pencampuran

The "AE-PLC-MS" is a mixing system commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different valves. The system is equipped with flow...
Lihat Unit
PUNCHING WORKSTATION - AE-PLC-PHD
  • AE-PLC-PHD
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-PHD

Stasiun Pelubangan

The "AE-PLC-PHD" is a processing workstation commanded by a PLC. This unit takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the punching zone, the hydraulic punching...
Lihat Unit
FILLING WORKSTATION - AE-PLC-FS
  • AE-PLC-FS
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-FS

Stasiun Pengisian

The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....
Lihat Unit
CORKING WORKSTATION - AE-PLC-CRS
  • AE-PLC-CRS
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-CRS

Stasiun Pemasangan Tutup Botol

The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...
Lihat Unit
BOTTLE OPENING WORKSTATION - AE-PLC-APB
  • AE-PLC-APB
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-APB

Stasiun Pembukaan Kaleng

The "AE-PLC-APB" is a bottles opening system commanded by a PLC. The unit is equipped with different containers and a retention system based on a cylinder, in order to allow the Robotic Arm Workstation "AE-BR" or the SCARA Arm Workstation "AE-SCA"...
Lihat Unit
CONTROL PROCESSES WORKSTATION - AE-PLC-CP
  • AE-PLC-CP
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-CP

Stasiun Kontrol Proses

The "AE-PLC-CP" is a process control workstation commanded by a PLC that coordinates the work of 3 industrial controllers that regulates in parallel the level, flow rate, temperature and pressure processes. The "AE-PLC-CP" workstation has been...
Lihat Unit
ROTARY TABLE WORKSTATION 4 - AE-PLC-MR4
  • AE-PLC-MR4
Available
6.2.5.3.- APLIKASI ROTASI WORKSTATION

AE-PLC-MR4

Stasiun Meja Putar: Pengisian, Pembotolan, dan Penutupan

The "AE-PLC-MR4" is a rotary table workstation commanded by a PLC that perform the bottling, filling and capping functions.The "AE-PLC-MR4" workstation has been designed as a modular system to facilitate the understanding of the equipment...
Lihat Unit
PIECES MANIPULATOR WORKSTATION - AE-PLC-MPS
  • AE-PLC-MPS
Available
6.2.5.4.- BAGIAN PENANGANAN APLIKASI WORKSTATION

AE-PLC-MPS

Stasiun Penanganan Bagian

The "AE-PLC-MPS", Pieces Manipulator Workstation, is a unit that works with pneumatics, electro-pneumatics and vacuum technologies.The "AE-PLC-MPS" performs the following operation: moving a piece from one position to another by using suction pads...
Lihat Unit
LINEAR TRANSPORT WORKSTATION - AE-PLC-T
  • AE-PLC-T
Available
6.2.5.4.- BAGIAN PENANGANAN APLIKASI WORKSTATION

AE-PLC-T

Stasiun Transportasi Linear

The "AE-PLC-T" is a linear transporting system, which moves the pallets, that carries the pieces, along the system. The unit is configured in a closed loop conveyor powered by an electrical motor, the whole system is commanded by a PLC. The...
Lihat Unit
POSITIONING WORKSTATION - AE-PLC-SPO
  • AE-PLC-SPO
Available
6.2.5.4.- BAGIAN PENANGANAN APLIKASI WORKSTATION

AE-PLC-SPO

Stasiun Pemosisian

The Positioning Workstation, "AE-PLC-SPO", has been designed by EDIBON to studiy three-axis positioners for computer integrated manufacturing systems. It sorts incoming pieces based on material and dimensions using a PLC-controlled manipulator.The...
Lihat Unit
ELECTRICAL HANDLING WORKSTATION - AE-PLC-MAE
  • AE-PLC-MAE
Available
6.2.5.4.- BAGIAN PENANGANAN APLIKASI WORKSTATION

AE-PLC-MAE

Stasiun Penanganan Listrik

The "AE-PLC-MAE" is an electrical handling system commanded by a PLC. The "AE-PLC-MAE" is composed of a two axis electrical manipulator with a pneumatic gripper to transport the pieces from the input pieces holder to the corresponding position,...
Lihat Unit
PNEUMATIC HANDLING WORKSTATION - AE-PLC-MAN
  • AE-PLC-MAN
Available
6.2.5.4.- BAGIAN PENANGANAN APLIKASI WORKSTATION

AE-PLC-MAN

Stasiun Penanganan Pneumatik

The "AE-PLC-MAN" is a pneumatic handling workstation commanded by a PLC, which performs handling and sorting functions.The workstation identify the color of the input pieces at the input pieces area, once the color is identified, the station take...
Lihat Unit
AC CONVEYOR BELT WORKSTATION - AE-PLC-CTCA
  • AE-PLC-CTCA
Available
6.2.5.4.- BAGIAN PENANGANAN APLIKASI WORKSTATION

AE-PLC-CTCA

Stasiun Sabuk Konveyor AC

The "AE-PLC-CTCA" is an AC powered conveyor system commanded by a PLC. The "AE-PLC-CTCA" is composed by a conveyor, 4 position sensors to stop the conveyor at different positions, motor positioner, AC motor driver and three-phased motor to a...
Lihat Unit
CC CONVEYOR BELT WORKSTATION - AE-PLC-CTCC
  • AE-PLC-CTCC
Available
6.2.5.4.- BAGIAN PENANGANAN APLIKASI WORKSTATION

AE-PLC-CTCC

Stasiun Sabuk Konveyor DC

The DC Conveyor Belt Workstation, "AE-PLC-CTCC", explores DC conveyor system management, including piece classification. It features industrial components like PLC, sensors, etc., enabling control of an automatic DC-powered conveyor system with...
Lihat Unit
PNEUMATIC HANDLING AND CONVEYOR BELT - AE-PLC-MACT
  • AE-PLC-MACT
Available
6.2.5.4.- BAGIAN PENANGANAN APLIKASI WORKSTATION

AE-PLC-MACT

Stasiun Penanganan Pneumatik dan Sabuk Konveyor

The Pneumatic Handling and Conveyor Belt, "AE-PLC-MACT", is an automatic handling station with a conveyor system commanded by a PLC. The "AE-PLC-MACT" is composed of a pneumatic handling system that uses vacuum technology to move pieces from the...
Lihat Unit
ROBOTIC ARM WORKSTATION - AE-BR
  • AE-BR
Available
6.2.5.5.- APLIKASI WORKSTATION ROBOTIC

AE-BR

Stasiun Lengan Robot

The "AE-BR" is a robotic arm workstation with the programming console included. The robotic arm can command the pneumatic gripper or the electrical driller installed in it.The "AE-BR" workstation is able to perform a lot of functions including:...
Lihat Unit
SCARA ARM WORKSTATION - AE-SCA
  • AE-SCA
Available
6.2.5.5.- APLIKASI WORKSTATION ROBOTIC

AE-SCA

Stasiun Lengan Robot SCARA

The "AE-SCA" is a SCARA Arm Workstation with the programming console of the robot arm included. The "AE-SCA" also includes a PLC that commands the electrical gripper or the electrical driller.The "AE-SCA" workstation can perform a lot of functions...
Lihat Unit
Meminta informasi