6.1.- MEKATRONIK

Mekatronika adalah bidang teknik yang mencakup teknik mesin, teknik elektronik, dan teknik komputer. Tujuan utama mekatronika adalah otomatisasi mesin. Untuk mencapai tujuan ini, Industri Otomasi telah mengembangkan elektromekanis dan sistem terkomputerisasi untuk memiliki kontrol optimal atas proses industrinya. Model matematika untuk mengembangkan sistem dengan perilaku yang diinginkan diperoleh dengan elektronik kontrol.

Lihat Lebih Banyak

Saat ini, mekatronika berupaya meningkatkan mekanisme untuk mendapatkan operasi yang terkontrol dan otonom, merancang PID (Proportional-Integral-Derivative Controller) algoritma kontrol untuk menjalankan kontrol umpan balik dan menerapkan kontrol optimal, kontrol prediktif, dan kontrol non-linier teknik. Semua teknik kontrol ini diterapkan pada kontrol variabel suhu, aliran, tekanan, dll. Menggunakan instrumentasi industri.

Inovasi berkelanjutan dan peningkatan teknologi mengarahkan mekatronika ke desain mekanisme yang lebih kompleks dan canggih, dengan fitur yang lebih baik dan kapasitas kontrol yang besar. Mereka dapat melakukan proses otomatis melalui aktuasi pneumatik dan elektropneumatik, memperoleh gerakan cepat dan berulang, atau hidraulik atau Aktuasi elektrohidraulik, memperoleh torsi besar, kontrol gerak yang presisi dan cepat melalui teknologi motor servo, dan instrumentasi industri berbiaya rendah, dengan hebat fitur dan dapat diterapkan di Industri 4.0 baru.

Lihat Produk
MEKATRONIK UNITS
Menampilkan 13 -24 dari 64 produk
FLOW RATE CONTROL MODULE - RYC-C
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-C
Flow Rate Control Module
Aksesori dari RYC, RYC/T
The "RYC-C" Flow Rate Control module has been designed to study a practical control system, through the flow rate of a close water circuit.The "RYC-C" module consists of two main components: the "RYC-C" apparatus and the "RYC-C" interface box. The...
LUMINOSITY CONTROL MODULE - RYC-I
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-I
Luminosity Control Module
Aksesori dari RYC, RYC/T
The "RYC-I" Luminosity Control module has been designed to study a practical control system and study different light sensors, through the luminosity control with three different light sensors.The "RYC-I" module consists of two main components:...
PH CONTROL MODULE - RYC-pH
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-pH
pH Control Module
Aksesori dari RYC, RYC/T
The "RYC-pH" pH Control module has been designed to study a practical control system, through the pH dissolution control in a stirred tank.The "RYC-pH" module consists of two main components: "RYC-pH" apparatus and "RYC-pH" interface box. The...
POSITION CONTROL MODULE - RYC-CP
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS
RYC-CP
Position Control Module
Aksesori dari RYC, RYC/T
The "RYC-CP" Position Control module has been designed to study a practical control system, through the control of a linear position system.The "RYC-CP" module consists of two main components: the "RYC-CP" apparatus and the "RYC-CP" interface box....
INDUSTRIAL CONTROLLERS UNIT - CECI
  • CECI
Available
6.1.1.2.- PENGONTROL INDUSTRI
CECI
Pelatihan Kontrol Industri
The Industrial Controllers Unit, "CECI", is based on a modular design structure whose functionality is divided into different modules toallow the student a better understanding of the unit. The modules included in the unit are: industrial...
INDUSTRIAL CONTROLLERS NETWORKING - CRCI
  • CRCI
Available
6.1.1.2.- PENGONTROL INDUSTRI
CRCI
Jaringan Kontrol Industri
The Industrial Controllers Networking, "CRCI", unit is based on a modular design structure whose functionality is divided into different modules to allow the student a better understanding of the unit. The modules provided with the unit are: two...
COMPUTER CONTROLLED CONTROLLER TUNING UNIT - CEAC
  • CEAC
Available
6.1.1.2.- PENGONTROL INDUSTRI
CEAC
Pelatihan Penyesuai Kontrol
The Computer Controlled Controller Tuning Unit, "CEAC", provides the tools to simulate different industrial processes in a HIL system and control them with a commercial industrial controller. The CEAC unit works in conjunction with a computer, in...
FIELD BUS APPLICATIONS UNIT - CEAB
  • CEAB
Available
6.1.1.2.- PENGONTROL INDUSTRI
CEAB
Pelatihan untuk Aplikasi Field Bus
The Trainer for Field Bus Applications, "CEAB", provides the components to conform a real Profibus DP Network where the PC is the master device and different components included with the unit are the slave devices. The "CEAB" unit also allows to...
COMPUTER CONTROLLED COUPLED TANKS SYSTEM - CTAC
  • CTAC
Available
6.1.1.3.- APLIKASI SISTEM INDUSTRI
CTAC
Computer Controlled Coupled Tanks System
The Computer Controlled Coupled Tanks System, "CTAC", consists of four transparent tanks, each with a pressure sensor to measure the water level.The coupling configuration between tanks can be modified by the use of computer controlled solenoid...
COMPUTER CONTROLLED PROCESS CONTROL (ELECTRONIC VALVE) - UCP
  • UCP
Available
6.1.1.3.- APLIKASI SISTEM INDUSTRI
UCP
Unit Kontrol Proses Komputer Terkendali (Katup Elektronik)
The Computer Controlled Process Control (Electronic Valve), "UCP", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH, conductivity and...
COMPUTER CONTROLLED PROCESS CONTROL (PNEUMATIC VALVE) - UCPCN
  • UCPCN
Available
6.1.1.3.- APLIKASI SISTEM INDUSTRI
UCPCN
Unit Kontrol Proses Komputer Terkendali (Pneumatic Valve)
The Computer Controlled Process Control (Pneumatic Valve), "UCPCN", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH, conductivity and...
Meminta informasi