7.1.- TEKNIK MESIN

Rekayasa mekanik terdiri dari penerapan fisika pada elemen-elemen di sekitar kita untuk memperbaiki perangkat mekanik yang ada atau menciptakan yang baru.

Lihat Lebih Banyak

Karena didasarkan pada prinsip-prinsip fisik, asal-usulnya berasal dari awal prinsip-prinsip tersebut dan perkembangannya sangat terkait dengan kemajuan dalam mekanika. Namun, baru setelah penemuan mesin uap, rekayasa mekanik menjadi salah satu pilar pengembangan industri.

Akibat dari penemuan mesin ini, terjadilah Revolusi Industri pada abad ke-17. Sejak saat itu, dengan kontribusi dari ilmuwan dan insinyur seperti Watt, Stephenson, Tesla, atau Rankine, dimulailah pembaruan yang belum pernah terjadi sebelumnya, baik dalam konsep maupun pengembangan mesin-mesin baru.

Dengan perkembangan mesin-mesin ini, konsep industri berubah seperti yang diketahui saat itu. Produksi massal diperkenalkan, desain mesin ditingkatkan, dan, akibatnya, rentang proses produksi meningkat, menghasilkan berbagai produk baru yang sebelumnya tidak terpikirkan dan disesuaikan dengan kebutuhan masyarakat.

Dalam rekayasa mekanik, penting untuk memberikan perhatian khusus pada bidang studi dan aplikasi berikut:

  • Mekanisme.
  • Struktur.
  • Dinamika.
  • Getaran.
  • Osilasi.

Saat ini, setiap industri, mulai dari makanan hingga dirgantara, harus berada di tingkat tertinggi inovasi teknologi. Oleh karena itu, penelitian dan pengembangan perangkat baru menjadi sangat penting, agar selalu memiliki teknologi terbaru dan dapat memenuhi tuntutan industri 4.0.

Lihat Produk
Materi Terkait

TEKNIK MESIN PERALATAN

1.- FISIKA 2.- ELEKTRONIKA 3.- KOMUNIKASI 4.- LISTRIK 5.- ENERGI 6.- MEKATRONIK & OTOMASI 7.- MEKANIKA 8.- MEKANIKA FLUIDA 9.- TERMODINAMIK DAN TERMOTEKNIK 10.- PENGENDALIAN PROSES 11.- TEKNIK KIMIA 12.- TEKNOLOGI PANGAN & AIR 13.- LINGKUNGAN HIDUP 14.- TEKNIK BIOMEDIS AKSESORIS LABORATORIUM PABRIK PILOT SESUAI PESANAN
7.1.- TEKNIK MESIN 7.2.- TEKNIK MEKANIK OTOMOTIF 7.3.- TEKNIK MATERIAL 7.4.- PEMASANGAN DAN PEMELIHARAAN
7.1.1.- MECHANICS FUNDAMENTALS KITS 7.1.2.- MESIN SEDERHANA 7.1.3.- STATICS AND DYNAMICS 7.1.4.- GETARAN DAN OSILASI 7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION) 7.1.6.- MEKANIKA STRUKTURAL
7.1.2.1.- MEKANISME 7.1.2.2.- RODA GIGI
Menampilkan 73 -91 dari 91 produk
12 24 36
PARABOLIC ARCH UNIT - MARP
  • MARP
Available
7.1.6.- MEKANIKA STRUKTURAL

MARP

Peralatan Busur Parabola

The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...
Lihat Unit
THREE-HINGED ARCH UNIT - MART
  • MART
Available
7.1.6.- MEKANIKA STRUKTURAL

MART

Peralatan Busur Tiga Titik Artikulasi

The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...
Lihat Unit
UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2
  • MFCS2
Available
7.1.6.- MEKANIKA STRUKTURAL

MFCS2

Peralatan Studi Gaya pada Rangka Hiperstatik

The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", designed by EDIBON, allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in...
Lihat Unit
UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3
  • MFCS3
Available
7.1.6.- MEKANIKA STRUKTURAL

MFCS3

Peralatan untuk Studi Deformasi pada Rangka

The Unit for studying Deformation of Trusses, "MFCS3", designed by EDIBON, allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the...
Lihat Unit
TWO HINGED ARCH UNIT - MFL
  • MFL
Available
7.1.6.- MEKANIKA STRUKTURAL

MFL

Peralatan Busur Dua Titik Artikulasi

The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...
Lihat Unit
PORTAL FRAME UNIT - MPO
  • MPO
Available
7.1.6.- MEKANIKA STRUKTURAL

MPO

Peralatan Portal

The Portal Frame Unit, "MPO", designed by EDIBON, allows for precise measurements of vertical and horizontal deflection in an embedded rectangular portal frame. By applying various loads with specific weights, changes in the portal frame’s...
Lihat Unit
STRESS HYPOTHESES UNIT - STH
  • STH
Available
7.1.6.- MEKANIKA STRUKTURAL

STH

Peralatan Hipotesis Tegangan

The Stress Hypotheses Unit, "STH", has been designed by EDIBON to study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are...
Lihat Unit
SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE
  • MEPE
Available
7.1.6.- MEKANIKA STRUKTURAL

MEPE

Peralatan untuk Studi Masalah Stabilitas

The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...
Lihat Unit
UNIT FOR STUDYING METHODS TO DETERMINE THE ELASTIC LINE - MDLE
  • MDLE
Available
7.1.6.- MEKANIKA STRUKTURAL

MDLE

Peralatan Studi Metode untuk Menentukan Garis Elastis

The Unit for studying Methods to Determine the Elastic Line, "MDLE", designed by EDIBON, consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys,...
Lihat Unit
UNIT TO STUDY STRESS ON A MEMBRANE - SSM
  • SSM
Available
7.1.6.- MEKANIKA STRUKTURAL

SSM

Peralatan untuk Studi Tegangan pada Membran

The Unit to Study Stress on a Membrane, "SSM", designed by EDIBON, allows the study of stresses and deformations in a thin disc or membrane subjected to different compressive stresses.The main element of the equipment is a thin disc or membrane...
Lihat Unit
UNSYMMETRICAL CANTILEVER UNIT - MVV
  • MVV
Available
7.1.6.- MEKANIKA STRUKTURAL

MVV

Peralatan Balok Kantilever

The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...
Lihat Unit
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- UJI MEKANIK

MDB

Peralatan Defleksi pada Batang Melengkung

The Deflection of Curved Bars Unit, "MDB", designed by EDIBON, consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two...
Lihat Unit
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- UJI MEKANIK

MFV

Demonstrator Lenturan Balok

Computer Controlled Modular Hydraulic Turbine Unit, "HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of...
Lihat Unit
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- UJI MEKANIK

MFLT

Peralatan Tekuk pada Batang

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
Lihat Unit
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- UJI MEKANIK

MEBM

Peralatan Modus Tekuk Euler

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
Lihat Unit
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- UJI MEKANIK

MUP

Peralatan Universal untuk Tekuk

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
Lihat Unit
SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF
  • MMF
Available
7.3.2.1.- UJI MEKANIK

MMF

Peralatan Momen Lentur dan Gaya Geser

The Shear Force and Bending Momentum Unit, "MMF", designed by EDIBON, is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the...
Lihat Unit
Meminta informasi