7.1.- TEKNIK MESIN

Rekayasa mekanik terdiri dari penerapan fisika pada elemen-elemen di sekitar kita untuk memperbaiki perangkat mekanik yang ada atau menciptakan yang baru.

Lihat Lebih Banyak

Karena didasarkan pada prinsip-prinsip fisik, asal-usulnya berasal dari awal prinsip-prinsip tersebut dan perkembangannya sangat terkait dengan kemajuan dalam mekanika. Namun, baru setelah penemuan mesin uap, rekayasa mekanik menjadi salah satu pilar pengembangan industri.

Akibat dari penemuan mesin ini, terjadilah Revolusi Industri pada abad ke-17. Sejak saat itu, dengan kontribusi dari ilmuwan dan insinyur seperti Watt, Stephenson, Tesla, atau Rankine, dimulailah pembaruan yang belum pernah terjadi sebelumnya, baik dalam konsep maupun pengembangan mesin-mesin baru.

Dengan perkembangan mesin-mesin ini, konsep industri berubah seperti yang diketahui saat itu. Produksi massal diperkenalkan, desain mesin ditingkatkan, dan, akibatnya, rentang proses produksi meningkat, menghasilkan berbagai produk baru yang sebelumnya tidak terpikirkan dan disesuaikan dengan kebutuhan masyarakat.

Dalam rekayasa mekanik, penting untuk memberikan perhatian khusus pada bidang studi dan aplikasi berikut:

Mekanisme.
Struktur.
Dinamika.
Getaran.
Osilasi.

Saat ini, setiap industri, mulai dari makanan hingga dirgantara, harus berada di tingkat tertinggi inovasi teknologi. Oleh karena itu, penelitian dan pengembangan perangkat baru menjadi sangat penting, agar selalu memiliki teknologi terbaru dan dapat memenuhi tuntutan industri 4.0.

Lihat Produk

Materi Terkait

TEKNIK MESIN PERALATAN

Menampilkan 37 -72 dari 90 produk

Available

7.1.3.- STATICS AND DYNAMICS

CGU

Peralatan Pengatur Sentrifugal

The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...

Available

7.1.3.- STATICS AND DYNAMICS

MED

Peralatan Keseimbangan Dinamis/Statis

The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...

Available

7.1.3.- STATICS AND DYNAMICS

MES

Peralatan Keseimbangan Sederhana

The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...

Available

7.1.3.- STATICS AND DYNAMICS

MIF

Peralatan Roda Gila

The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...

MRYE1

Available

7.1.3.- STATICS AND DYNAMICS

MRYE1

Peralatan Roda dan Poros (Bubut)

The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...

WHEEL AND DIFFERENTIAL AXLE UNIT - MRYE2

MRYE2

Available

7.1.3.- STATICS AND DYNAMICS

MRYE2

Peralatan Roda dan Poros Diferensial (Bubut Diferensial)

The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...

MELH

Available

7.1.3.- STATICS AND DYNAMICS

MELH

Peralatan untuk Studi Hukum Hooke

The Unit for studying Hooke's Law, "MELH", designed by EDIBON, demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring –...

MSHU

Available

7.1.3.- STATICS AND DYNAMICS

MSHU

Peralatan Gerak Harmonik Sederhana

This Simple Harmonic Motion Unit, "MSHU", designed by EDIBON, allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a...

Available

7.1.3.- STATICS AND DYNAMICS

SRI

Peralatan untuk Studi Momen Inersia Rotasional

The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...

COMPUTER CONTROLLED TORSIONAL VIBRATION UNIT - MEVTC

MEVTC

Available

7.1.4.- GETARAN DAN OSILASI

MEVTC

Peralatan Studi Getaran Torsi, Dikendalikan dari Komputer (PC)

The Computer Controlled Torsional Vibration Unit, "MEVTC", has been designed by EDIBON to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with...

MVRE

Available

7.1.4.- GETARAN DAN OSILASI

MVRE

Peralatan Getaran Pegas Spiral

The Vibration of Coil Spring Unit, "MVRE", has been designed by EDIBON to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion.In this sense, the unit consists of a...

Available

7.1.4.- GETARAN DAN OSILASI

MVL

Peralatan Getaran Bebas

The Free Vibration Unit, "MVL", has been designed by EDIBON to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be...

MVLF

Available

7.1.4.- GETARAN DAN OSILASI

MVLF

Peralatan Getaran Bebas dan Paksa

The Free and Forced Vibration Unit, "MVLF", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free and forced vibrations of a simple spring-mass-damper system. Simple...

CMVAS

Available

7.1.4.- GETARAN DAN OSILASI

CMVAS

Peralatan Analisis Getaran Mekanis Komprehensif

The Comprehensive Mechanical Vibration Analysis Unit, "CMVAS", has been designed by EDIBON for an in-depth study of vibrations in mechanical systems, a phenomenon present in most industrial and engineering processes. These vibrations can lead to...

UNIT FOR STUDYING FREE VIBRATION OF A BAR - MEVLB

MEVLB

Available

7.1.4.- GETARAN DAN OSILASI

MEVLB

Peralatan Studi Getaran Bebas pada Batang

The Unit for Studying Free Vibration of a Bar,"MEVLB", allows to study the features of the free vibrations of a bending bar.The natural frequency of the bending bar can be modified adding additional loads at the free end of a bar or varying the...

Available

7.1.4.- GETARAN DAN OSILASI

MOT

Peralatan Osilasi Torsi

The Torsional Oscillations Unit, "MOT", is intended for easy experiments. It enables to illustrate and investigate the torsional oscillation in single rotor, multi-rotor and geared systems. The unit basically consists of a rigid frame that have...

COMPUTER CONTROLLED CRITICAL SPEED INVESTIGATION UNIT - MVCC

MVCC

Available

7.1.4.- GETARAN DAN OSILASI

MVCC

Peralatan untuk Penelitian Kecepatan Kritis, Dikendalikan dari Komputer (PC)

Some phenomena that appear in mechanical systems, such as vibration, self-centering and resonance in rotary shafts, can be clearly demonstrated with the Computer Controlled Critical Speed Investigation Unit, "MVCC".The operation of the "MVCC" unit...

MEER

Available

7.1.4.- GETARAN DAN OSILASI

MEER

Peralatan Studi Rotasi Poros

The Whirling of Shafts Unit, "MEER", has been designed by EDIBON to demonstrate and determine different modes of oscillation and resonance of shafts with continuous distribution of mass under different conditions.The operation of the Whirling of...

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MCF

Peralatan Sabuk Gesek

The Belt Friction Unit, "MCF", allows us to carry out studies and investigations to compare the driving torque for a given degree of overlap of a flat belt (leather or rope) and a V belt.With this unit the relationship between the tensions in the...

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEF

Peralatan Studi Gesekan

The Friction Study Unit, "MEF", allows the unit to illustrate the friction force by simple demonstrations.It is designed for the study of the relations between friction forces and normal forces, between hard or soft surfaces, between lubricated or...

MPCO

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MPCO

Peralatan Studi Distribusi Tekanan pada Bantalan

The Journal Bearing Unit, "MPCO", designed by EDIBON, allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its...

MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT

Peralatan Modular Tribologi

The Tribology Modular Unit, "MEMT", designed by EDIBON, consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is...

DRIVE UNIT FOR TRIBOLOGICAL TESTS - MEMT-UB

Aksesori dari MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-UB

Peralatan Penggerak untuk Uji Tribologi

Aksesori dari MEMT

This unit is common for the modules type "MEMT".It consists of a base unit and an electronic console:The Base Unit consists of a drive unit formed by a DC motor with a shaft. The motor is mounted in a reduction gear, obtaining enough torque in the...

RADIAL PRESSURE DISTRIBUTION IN A JOURNAL BEARING - MEMT-1

Aksesori dari MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-1

Distribusi Tekanan Radial pada Bantalan Geser

Aksesori dari MEMT

This unit allows the visualization of the radial pressure distribution in a journal bearing with hydrodynamic lubrication.The "MEMT-1" unit consists of a journal bearing with hydrodynamic lubrication, a freely moving bearing housing with thirteen...

DYNAMIC FRICTION OF A CYLINDER ON A ROLLER - MEMT-2

Aksesori dari MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-2

Gesekan Dinamis Silinder pada Rol

Aksesori dari MEMT

This unit allows to demonstrate the friction forces between several cylinders of different materials and a roller under different lubrication conditions.The "MEMT-2" unit consists of two levers that transmit a force applied by weights to a test...

DYNAMIC FRICTION OF A PIN ON A DISC - MEMT-3

Aksesori dari MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-3

Gesekan Dinamis Baut pada Cakram

Aksesori dari MEMT

This unit allows to study the friction forces between several vertical friction pins of different materials and a rotating friction disc.The end of each vertical pin is made of a different material and rubs against the rotating steel disc. The...

Aksesori dari MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-4

Gesekan Gulir pada Roda

Aksesori dari MEMT

This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...

Aksesori dari MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-5

Pelumasan Elastohidrodinamik

Aksesori dari MEMT

This unit allows to investigate the thickness and characteristics of a lubricant film on a rolling sphere.The unit consists in a steel sphere and a driven glass disc.The sphere is pressed against the underside of the glass disc. The light from a...

Aksesori dari MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-6

Getaran akibat Gesekan

Aksesori dari MEMT

This module allows to demonstrate the static friction, the sliding friction, the related friction vibrations and the slip-stick effects.Several weights are placed on a horizontally rotating friction disc. It is prevented from turning by a cord....

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MCD

Peralatan Silinder Tipis

The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...

UNIT FOR STUDYING BEARING FRICTION - MBF

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MBF

Peralatan untuk Studi Gesekan pada Bantalan

The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...

BELT FRICTION UNIT WITH DYNAMOMETERS - MCF/A

MCF/A

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MCF/A

Peralatan Sabuk Gesek dengan Dinamometer

The Belt Friction Unit with Dynamometers, "MCF/A", designed by EDIBON, allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.With this unit it is possible to observe the...

MCPG

Available

7.1.6.- MEKANIKA STRUKTURAL

MCPG

Peralatan Silinder Berdinding Tebal

In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...

UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG

MFPG

Available

7.1.6.- MEKANIKA STRUKTURAL

MFPG

Peralatan Studi Gaya pada Lengan Crane

The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...

Available

7.1.6.- MEKANIKA STRUKTURAL

MVS

Peralatan Jembatan Gantung

The Suspension Bridge Unit, "MVS", has been meticulously designed by EDIBON to explore the dynamics of stresses in a suspension bridge system. This unit simulates a suspension bridge using a deck and two parallel main cables, allowing students to...

MARP

Available

7.1.6.- MEKANIKA STRUKTURAL

MARP

Peralatan Busur Parabola

The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...

UNTUK INFORMASI LEBIH LANJUT, HUBUNGI KAMI