7.1.- TEKNIK MESIN

Rekayasa mekanik terdiri dari penerapan fisika pada elemen-elemen di sekitar kita untuk memperbaiki perangkat mekanik yang ada atau menciptakan yang baru.

Lihat Lebih Banyak

Karena didasarkan pada prinsip-prinsip fisik, asal-usulnya berasal dari awal prinsip-prinsip tersebut dan perkembangannya sangat terkait dengan kemajuan dalam mekanika. Namun, baru setelah penemuan mesin uap, rekayasa mekanik menjadi salah satu pilar pengembangan industri.

Akibat dari penemuan mesin ini, terjadilah Revolusi Industri pada abad ke-17. Sejak saat itu, dengan kontribusi dari ilmuwan dan insinyur seperti Watt, Stephenson, Tesla, atau Rankine, dimulailah pembaruan yang belum pernah terjadi sebelumnya, baik dalam konsep maupun pengembangan mesin-mesin baru.

Dengan perkembangan mesin-mesin ini, konsep industri berubah seperti yang diketahui saat itu. Produksi massal diperkenalkan, desain mesin ditingkatkan, dan, akibatnya, rentang proses produksi meningkat, menghasilkan berbagai produk baru yang sebelumnya tidak terpikirkan dan disesuaikan dengan kebutuhan masyarakat.

Dalam rekayasa mekanik, penting untuk memberikan perhatian khusus pada bidang studi dan aplikasi berikut:

Mekanisme.
Struktur.
Dinamika.
Getaran.
Osilasi.

Saat ini, setiap industri, mulai dari makanan hingga dirgantara, harus berada di tingkat tertinggi inovasi teknologi. Oleh karena itu, penelitian dan pengembangan perangkat baru menjadi sangat penting, agar selalu memiliki teknologi terbaru dan dapat memenuhi tuntutan industri 4.0.

Lihat Produk

Materi Terkait

TEKNIK MESIN PERALATAN

Menampilkan 25 -48 dari 90 produk

UNIT TO STUDY COMBINED DRIVES ASSEMBLY - MCDA

MCDA

Available

14.1.2.2.- RODA GIGI

MCDA

Peralatan Pemasangan Transmisi Gabungan

The Unit to Study Combined Drives Assembly, "MCDA", designed by EDIBON, allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology.With this unit,...

UNIT TO STUDY GEAR TRAIN ASSEMBLY - MGTA

MGTA

Available

14.1.2.2.- RODA GIGI

MGTA

Peralatan Pemasangan Rangkaian Roda Gigi

The Study Gear Train Assembly Unit, "MGTA", designed by EDIBON, allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the...

Available

14.1.2.2.- RODA GIGI

MGE

Peralatan Pembuatan Roda Gigi

The Gear Generation Unit, "MGE", has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...

Available

14.1.2.2.- RODA GIGI

MEE

Peralatan Pengangkat dengan Roda Gigi

The Geared Lifting Unit, "MEE", has been designed to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support the gear...

MESE-T

Available

7.1.2.2.- RODA GIGI

MESE-T

Studi Roda Gigi

The Geared Study Drive Unit, "MESE", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission.For the...

UNIT FOR THE KINEMATIC STUDY OF GEAR TRAINS - KSGT

KSGT

Available

7.1.2.2.- RODA GIGI

KSGT

Peralatan untuk Studi Kinematika Kereta Roda Gigi

The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...

UNIT FOR STUDYING EQUILIBRIUM OF MOMENTS ON A TWO ARM LEVER - MEMB2

MEMB2

Available

7.1.3.- STATICS AND DYNAMICS

MEMB2

Peralatan untuk Studi Keseimbangan Momen pada Tuas Dua Lengan

The Unit for studying Equilibrium of Moments on a Two Arm Lever,"MEMB2", allows to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme of a vertical support...

COMPUTER CONTROLLED BALANCE OF RECIPROCATING MASSES UNIT - MBMRC

MBMRC

Available

7.1.3.- STATICS AND DYNAMICS

MBMRC

Peralatan Penyeimbangan Massa Resiprokal, Dikendalikan dari Komputer (PC)

The Computer Controlled Balance of Reciprocating Masses Unit, "MBMRC", is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...

MEAL

Available

7.1.3.- STATICS AND DYNAMICS

MEAL

Peralatan Studi dan Analisis Cam

The Cam Analysis Unit "MEAL" allows to observe the effect of the profile of a cam, the study of the displacement, velocity and acceleration profiles of the cam and the identification of the factors that can modify the dynamics of the cam. This...

CORIOLIS FORCE DEMONSTRATION UNIT - MDFC

MDFC

Available

7.1.3.- STATICS AND DYNAMICS

MDFC

Peralatan untuk Demonstrasi Gaya Coriolis

The Coriolis Force Demonstration Unit, "MDFC", designed by EDIBON, is used to observe the deflection of a jet of water generated by a pump attached to a rotating arm that rotates to different speeds in a horizontal plane. An electronically...

MFCE

Available

7.1.3.- STATICS AND DYNAMICS

MFCE

Peralatan untuk Studi Gaya Sentrifugal

The Centrifugal Force Unit, "MFCE", designed by EDIBON, is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis.The unit consists of a vertical axis of rotation and a...

Available

7.1.3.- STATICS AND DYNAMICS

MGI

Giroskop

The Gyroscope, "MGI", allows the experimental demonstration of the different rotation modes of a gyroscope and the moments generated by the gyroscopic effect. The rotor of the electric motor (rotating motor) shares a horizontally supported shaft...

Available

7.1.3.- STATICS AND DYNAMICS

CGU

Peralatan Pengatur Sentrifugal

The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...

Available

7.1.3.- STATICS AND DYNAMICS

MED

Peralatan Keseimbangan Dinamis/Statis

The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...

Available

7.1.3.- STATICS AND DYNAMICS

MES

Peralatan Keseimbangan Sederhana

The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...

Available

7.1.3.- STATICS AND DYNAMICS

MIF

Peralatan Roda Gila

The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...

MRYE1

Available

7.1.3.- STATICS AND DYNAMICS

MRYE1

Peralatan Roda dan Poros (Bubut)

The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...

WHEEL AND DIFFERENTIAL AXLE UNIT - MRYE2

MRYE2

Available

7.1.3.- STATICS AND DYNAMICS

MRYE2

Peralatan Roda dan Poros Diferensial (Bubut Diferensial)

The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...

MELH

Available

7.1.3.- STATICS AND DYNAMICS

MELH

Peralatan untuk Studi Hukum Hooke

The Unit for studying Hooke's Law, "MELH", designed by EDIBON, demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring –...

MSHU

Available

7.1.3.- STATICS AND DYNAMICS

MSHU

Peralatan Gerak Harmonik Sederhana

This Simple Harmonic Motion Unit, "MSHU", designed by EDIBON, allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a...

Available

7.1.3.- STATICS AND DYNAMICS

SRI

Peralatan untuk Studi Momen Inersia Rotasional

The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...

COMPUTER CONTROLLED TORSIONAL VIBRATION UNIT - MEVTC

MEVTC

Available

7.1.4.- GETARAN DAN OSILASI

MEVTC

Peralatan Studi Getaran Torsi, Dikendalikan dari Komputer (PC)

The Computer Controlled Torsional Vibration Unit, "MEVTC", has been designed by EDIBON to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with...

MVRE

Available

7.1.4.- GETARAN DAN OSILASI

MVRE

Peralatan Getaran Pegas Spiral

The Vibration of Coil Spring Unit, "MVRE", has been designed by EDIBON to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion.In this sense, the unit consists of a...

Available

7.1.4.- GETARAN DAN OSILASI

MVL

Peralatan Getaran Bebas

The Free Vibration Unit, "MVL", has been designed by EDIBON to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be...

UNTUK INFORMASI LEBIH LANJUT, HUBUNGI KAMI