NEW Basic Mechanics course
Читать дальше7.1.- МАШИНОСТРОЕНИЕ
Механическая инженерия - это применение физики к элементам, которые нас окружают, для улучшения существующих механических устройств или создания новых. Поскольку он основан на физических принципах, его происхождение восходит к истокам этих принципов, и его разработка тесно связана с достижениями механики. Тем не менее, только изобретение парового двигателя стало одним из столпов развития отрасли.
Узнать большеВ результате создания этого устройства произошла Промышленная революция семнадцатого века. С этого момента при участии ученых и инженеров, столь же важных, как Ватт, Стефенсон, Тесла или Ранкин, началось беспрецедентное обновление как концепции, так и разработки новых аппаратов.
Понятие промышленности, как оно было известно до этого момента, изменилось с развитием этих машин. Масовое производство было реализовано, машинныедизайны были усовершенствованы, и, следовательно, расширился диапазон производственных процессов, в результате чего появилось немыслимое разнообразие новых продуктов, адаптированных к потребностям общества.
С точки зрения машиностроения, стоит упомянуть следующие области изучения и применения:
- Механизмы.
- Структуры.
- Динамика.
- Вибрации.
- Обстановки.
В настоящее время любая отрасль промышленности, от продовольственной до аэрокосмической, должна быть на самом высоком технологическом уровне инновации. Поэтому исследования и разработки новых устройств особенно важны для того, чтобы всегда иметь новейшую технологию и быть на уровне, требуемом отраслью 4.0.
Посмотреть продукты
Материалы по Tеме
ПРОДУКТЫ МАШИНОСТРОЕНИЕ
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MFBS
The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MFCS1
Устройство для изучения сил в различных плоских фермах
The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the experimental bar forces...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MFCS2
Устройство изучения сил в жёстких фермах
The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in the single plane...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MFCS3
Устройство для изучения деформации в каркасах
The Unit for studying Deformation of Trusses, "MFCS3", allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the experimental forces in the...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MFL
Устройство двухшарнирной арки
The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MPO
Устройство портальной рамы
The Portal Frame Unit, "MPO", allows to perform vertical deflection and horizontal deflection measurements in a fixed rectangular portal frames.To carry out the deflection tests, a series of loads with different weight must be applied to the...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
STH
Оборудование для гипотез напряжений
The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MEPE
Устройство для изучения проблем устойчивости
The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MDLE
Устройство для изучения методов для определения эластичных линий
The Unit for studying Methods to Determine the Elastic Line, "MDLE", consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys, dial gauges and a set...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
SSM
Оборудование для изучения напряжений в мембране
The Unit to Study Stress on a Membrane, "SSM", designed by EDIBON, allows the study of stresses and deformations in a thin disc or membrane subjected to different compressive stresses.The main element of the equipment is a thin disc or membrane...
7.1.6.- СТРОИТЕЛЬНАЯ МЕХАНИКА
MVV
Установка трения в несимметричной консольной балке
The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...
7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ
MDB
Устройство прогиба изогнутого бруска
The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ
MFV
Устройство прогиба балки
The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...
7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ
MFLT
Машина для изучения смятия стержней
The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ
MEBM
Оборудование для изучения модов панелирования Эйлера
With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ
MUP
Универсальное устройство продольного изгиба
The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
7.3.2.1.- МЕХАНИЧЕСКИЙ ТЕСТ
MMF
Установка поперечной силы и изгибающего момента
The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...