NEW Basic Mechanics course
Читать дальше7.1.- МАШИНОСТРОЕНИЕ
Механическая инженерия - это применение физики к элементам, которые нас окружают, для улучшения существующих механических устройств или создания новых. Поскольку он основан на физических принципах, его происхождение восходит к истокам этих принципов, и его разработка тесно связана с достижениями механики. Тем не менее, только изобретение парового двигателя стало одним из столпов развития отрасли.
Узнать большеВ результате создания этого устройства произошла Промышленная революция семнадцатого века. С этого момента при участии ученых и инженеров, столь же важных, как Ватт, Стефенсон, Тесла или Ранкин, началось беспрецедентное обновление как концепции, так и разработки новых аппаратов.
Понятие промышленности, как оно было известно до этого момента, изменилось с развитием этих машин. Масовое производство было реализовано, машинныедизайны были усовершенствованы, и, следовательно, расширился диапазон производственных процессов, в результате чего появилось немыслимое разнообразие новых продуктов, адаптированных к потребностям общества.
С точки зрения машиностроения, стоит упомянуть следующие области изучения и применения:
- Механизмы.
- Структуры.
- Динамика.
- Вибрации.
- Обстановки.
В настоящее время любая отрасль промышленности, от продовольственной до аэрокосмической, должна быть на самом высоком технологическом уровне инновации. Поэтому исследования и разработки новых устройств особенно важны для того, чтобы всегда иметь новейшую технологию и быть на уровне, требуемом отраслью 4.0.
Посмотреть продукты
Материалы по Tеме
ПРОДУКТЫ МАШИНОСТРОЕНИЕ
7.1.2.1.- МЕХАНИЗМЫ
MCA
The Four-Bar Mechanism, "MCA", designed by EDIBON, is a bench-top unit to perform laboratory experiments.It is made of anodized aluminum and consists of two rotary elements (graduated discs) mounted on ball bearings. The discs include a scale to...
7.1.2.1.- МЕХАНИЗМЫ
MME
Механизм Мальтийский крест
The Geneva Stop Mechanism, "MME", designed by EDIBON, is a mechanism that transforms continuous circular motion into intermittent motion. It is a positive drive in which the driven wheel is positively moved or locked.It is made of aluminum and...
7.1.2.1.- МЕХАНИЗМЫ
MAC
Механизм сцепления
The Coupling Mechanism, "MAC", represents a simple Oldham type coupling. The lateral displacement of the input and output shafts may be varied and circular scales are fitted to the input and output flanges.It consists of two outer discs made of...
7.1.2.1.- МЕХАНИЗМЫ
MUN
Механизм соединения Хука
The Hooke’s Joint Mechanism, "MUN", designed by EDIBON, represents a universal coupling, also called a U-joint, Hooke joint or cardan joint. The Hooke joint is a universal mechanism that is often used to transmit rotary motion between two...
7.1.2.1.- МЕХАНИЗМЫ
MEX
Эксцентриковый механизм
The Cam and Follower Mechanism, "MEX", allows to study the cam-follower and eccentric-follower mechanisms. For that purpose, several plate cam models in different forms, one eccentric and several roller-shaped, flat-shaped, wedge-shaped and...
7.1.2.1.- МЕХАНИЗМЫ
MBI
Механизм шатуна
The Crank Mechanism "MBI", is a unit designed to observe, study and record the motion of a crank and the forces involved in a simple engine mechanism. The piston is linearly displaced through a cylinder with the aid of a guide.Bearings are coupled...
7.1.2.1.- МЕХАНИЗМЫ
MDA
Рулевой механизм Аккермана
The Ackermann Steering Mechanism, "MDA", is a bench-mounted unit designed to determine the lead angle of a steering trapezoid in an Ackermann steering mechanism, the disadvantages of incorrectly adjusted track rods and the influence of the track...
7.1.2.1.- МЕХАНИЗМЫ
MMEL
Механизм лебёдки
The Winch Mechanism, "MMEL", allows to study the lifting velocity and load transmission of a winch. Efficiency and load transmission can be determined by force balance.The unit consists of a gear transmission mechanism. One gear is the input gear...
7.1.2.1.- МЕХАНИЗМЫ
MBLU
Реечное устройство соединения
The Bar Linkages Unit "MBLU" allows many experiments using different arrangements of their parts.The "MBLU" unit includes a selection of more than twenty perforated bars of different lengths and pivots or "joints" to allow students to configure...
14.1.2.2.- ПРИВОДЫ
MTSF
Устройство для вращения червячной передачи и колеса
The Worm and Wheel Unit, "MTSF", allows to demonstrate the principle of a worm gear.The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel.The worm and wheel are positioned a set distance...
14.1.2.2.- ПРИВОДЫ
MAE
Установка ускорения редукторной системы
The Acceleration of Geared Systems Unit "MAE" allows to perform tests to calculate the moment of inertia of a gear train system.The MAE unit includes six gears. Two of them can have another position in the shafts to vary the gear ratio, allowing...
14.1.2.2.- ПРИВОДЫ
MSDA
Оборудование для монтажа простых передач
The Simple Drives Assembly Unit, "MSDA", allows the knowledge and learning of the fundamentals of the mechanical transmission technique, as well as the assembly, disassembly and experimentation with simple gears.The unit allows to carry out...