7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

ПРОДУКТЫ ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

Показано 13-23 из 23

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SSDG

Набор дефектов в шестернях

Аксессуар MDU

The Set to Study Damage in Gears, "MDU-SSDG", allows to study the vibrational behavior of gears with typical defects.For that purpose, gears with tooth defects and gears without defects are included, so a comparative study can be carried out. The...

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SCM

Набор для механизма шатун-кривошип

Аксессуар MDU

The compressors and pumps frequently use crank and connecting rod mechanisms. The force and mass oscillations cause vibrations in the units.The Set of Crank Mechanism, "MDU-SCM", allows to adjust the stroke, mass compensation and bearing...

SET TO STUDY CAVITATION IN PUMPS - MDU-SSCP

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SSCP

Набор кавитации в насосах

Аксессуар MDU

Pump cavitation is produced when steam cavities are created within a fluid in which forces act responding to the pressure differences.Cavitation causes noise, damage to components and loss of performance.The Set to Study Cavitation in Pumps,...

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SSVF

Набор вибраций в магистралях MDU

Аксессуар MDU

In the Blower Vibration Set for MDU, "MDU-SSVF", the vibrations are magnetically induced. It is possible to study three impellers with a different number of movable vanes. It is also possible to study the gyroscopic effect by mounting the flywheel...

SET OF ELECTROMECHANICAL VIBRATIONS - MDU-SEV

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SEV

Набор электромеханических вибраций

Аксессуар MDU

Among the drive systems are the asynchronous motors, which generate vibrations in machines.This is the case with an asymmetric air gap (space between rotor and stator), in which the magnetic vibrational forces induce torsional and bending...

DISPLACEMENT SENSORS FOR MDU UNIT - MDU-SD

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SD

Датчики перемещения для оборудования МДУ

Аксессуар MDU

Two displacement sensors which, together with the Set of Elastic Shaft ,"MDU-SES", and the Software, Sensors and Control for MDU Unit, "MDU-SSC", allow you to represent subcritical and supercritical shaft orbits in resonance.

COMPUTER CONTROLLED UNIT TO STUDY VIBRATIONS IN MACHINE SUPPORTING STRUCTURES - VMSC

VMSC

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

VMSC

Оборудование для изучения вибраций в опорах машин, управляемое компьютером (ПК)

With the Computer Controlled Unit to Study Vibrations in Machine Supporting Structures, "VMSC", the problems of vibration isolation and construction of supporting structures are studied through practical exercises. In order to carry out the study,...

MSCT

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MSCT

Оборудование для проверки резьбовых соединений

The Screw Joint Testing Unit, "MSCT", represents the simulation of a tightening set consisting of a screw and a nut on two rectangular shaped beams.A very precise torque wrench performs the tightening through a threaded rod and a flywheel. The...

MSLG

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MSLG

Оборудование для изучения зубчатой передачи для токарных станков

The Unit to Study Lathe Gears, "MSLG", represents the gears of a typical lathe in a machining workshop, including: a main adjustable transmission gear, one Norton gearbox for the machining of specific threads and pitches, a pinion switching gear...

BASIC UNIT OF MECHANICAL DRIVE SYSTEMS - MDSU

MDSU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDSU

Базовое оборудование для механических приводных систем

The Basic Unit of Mechanical Drive Systems, "MDSU", consists of a main frame where a series of accessories and elements are arranged, distributed in modules of different level, thought to introduce the user in the field of mechanical systems and...

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

RGT

Учебное оборудование для такелажных работ

The Rigging Training Unit, "RGT", has been designed for the study of techniques to move loads of various shapes, sizes and types safely. The unit consists of an adjustable height gantry frame made of welded steel and beam attachment points. The...

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ