Today we are at the beginning of a new era, named ‘Industrie 4.0’. Let´s explain a little further the concept "Industrie 4.0"!
AEL-KNX1 Применение управления заслонкой KNX / EIB
ИННОВАЦИОННЫЕ СИСТЕМЫ
The KNX/EIB Shutter Control Application, "AEL-KNX1", has been designed by Edibon to show the users the working of shutter control, intended to improve the energy efficiency and the comfort of their occupants.
НОВОСТИ ПО ТЕМЕ
ОБЩЕЕ ОПИСАНИЕ
The KNX/EIB Shutter Control Application, "AEL-KNX1", has been designed by Edibon to show the users the working of shutter control, intended to improve the energy efficiency and the comfort of their occupants. Blind and shutter control can be done manually through switches or automatically with a constant close loop control with which the shutter and blind position is automatically adapted. These two methods allow us to get energy savings whenever the KNX devices are programmed properly.
The purpose of the AEL-KNX1 is to give the students a complete practical and theoretical training in the installations and programming of the most important KNX elements focused in blind and shutter control systems, characteristic of sensors, actuators, etc. KNX shutter actuators are responsible for carrying interior blinds or curtains at the appropriate level dynamically to obtain or avoid direct solar radiation through shading depending on temperature in each season.
KNX Weather Station is able to measure different variables useful in establishing energy efficiency actions and control strategies. Knowing precisely the outside temperature, if it is day or night, automatic summer/winter adaption, if it’s raining, wind speed, solar azimuth and the level of external brightness is very useful for efficient programming blinds and internal blinds motorized in a building.
KNX Room Controllers are responsible for providing user control of blinds and shutters, with its keypads and displays representing states with the position of the blind and monitoring all the variables sent by the weather station.
Thanks to these three control elements can be established control policies, based on automatic controls and simultaneously give all control to the user if they want to change before specific situations.
To take a maximum experience with the KNX/EIB Shutter Control Application is very recommendable to acquire the rest of the KNX offered by Edibon: AEL-KNX2, AEL-KNX3, AEL-KNX4 and AEL-KNX5. The combination of all these applications allow the student to design a complete intelligent bus system implemented by a KNX System.
In addition, this application requires the ETS latest generation KNX software to program different scenes, import of KNX projects, setting of sensors and actuators, etc.
УПРАЖНЕНИЯ И ПРИМЕРЫ С ИНСТРУКЦИЯМИ
РУКОВОДСТВО ПО ПРАКТИЧЕСКИМ УПРАЖНЕНИЯМ ВКЛЮЧЕНО В РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
- Study of the fundamentals of a KNX/EIB installation BUS.
- Programming of on-off smart switches to demonstrate KNX/EIB switching operations.
- Programming of switching for lights control.
- Study of preparation and installation methods of a KNX/EIB project.
- Utilization of conventional switches in a KNX/EIB project.
- Programming of the control of shutter and curtains.
- Programming the 3 way switching equivalent circuit.
БОЛЬШЕ ПРАКТИЧЕСКИХ УПРАЖНЕНИЙ ДЛЯ РАБОТЫ С УСТРОЙСТВОМ
Some practical possibilities with additional and recommended modules:
- Programming the touch panel according to different scenes.
- Checking all parameters in the touch panel.
- Centralized control of the main configurations in the touch panel.
- Extending a bus system through a single-line topology.
- Manual control over the main actuators.
- Study of the weather conditions control against disturbances variables.
- Programming of lighting regulation control.
АНАЛОГИ ОБОРУДОВАНИЯ В НАЛИЧИИ
4.2.4.- КОММУНИКАЦИОННАЯ ШИНА / ЕВРОПЕЙСКАЯ ИНСТАЛЛЯЦИОННАЯ ШИНА / АВТОМАТИЗАЦИЯ ЗДАНИЙ
AEL-KNX2
The KNX/EIB Heating Control Application, "AEL-KNX2", has been designed by Edibon to show the users the most important KNX elementsused in the most advanced heating control installations. Temperature control is carried out through temperature...
4.2.4.- КОММУНИКАЦИОННАЯ ШИНА / ЕВРОПЕЙСКАЯ ИНСТАЛЛЯЦИОННАЯ ШИНА / АВТОМАТИЗАЦИЯ ЗДАНИЙ
AEL-KNX3
Применение контроля безопасности KNX / EIB
The KNX/EIB Security Control Application, "AEL-KNX3", has been designed by Edibon to show the users the most important KNX elementsused in security alarm control systems with KNX technology.The purpose of the AEL-KNX3 is to give the students a...
4.2.4.- КОММУНИКАЦИОННАЯ ШИНА / ЕВРОПЕЙСКАЯ ИНСТАЛЛЯЦИОННАЯ ШИНА / АВТОМАТИЗАЦИЯ ЗДАНИЙ
AEL-KNX4
Применение управления освещением KNX / EIB
The KNX/EIB Lighting Control Application, "AEL-KNX4", has been designed by EDIBON to show the students the most important KNX elements used in the most advanced lighting control installations. Lighting control can be done through two methods:...
4.2.4.- КОММУНИКАЦИОННАЯ ШИНА / ЕВРОПЕЙСКАЯ ИНСТАЛЛЯЦИОННАЯ ШИНА / АВТОМАТИЗАЦИЯ ЗДАНИЙ
AEL-KNX5
Применение регулированием потребления энергии KNX / EIB
The KNX/EIB Energy Management Application, "AEL-KNX5", has been designed by Edibon to show the students the most important KNXelements used in the most advanced energy management systems.The purpose of the AEL-KNX5 is to give the students a...
4.2.3.- СТАНДАРТНЫЙ ПРОТОКОЛ УПРАВЛЕНИЯ ОСВЕЩЕНИЕМ
AEL-DALI
Применение установки DALI
The DALI Installations Application, "AEL-DALI", is designed by Edibon to study the most important subjects related to DALI technology, giving special hands-on training on this field. The AEL-DALI consists of different modules to study the...
4.2.5.- АВТОМАТИЗАЦИЯ АВТОМАТИЧЕСКОЙ СЕТИ УПРАВЛЕНИЯ СТРОИТЕЛЬСТВОМ ЗДАНИЙ
AEL-BCS
Применения автоматической сети управления строительством типа BacNet
The Building Automation and Control Networks BacNet Application, "AEL-BCS", is conceived in such a way to integrate cognitive and hands-on training into an overall concept linking together theory and practice and thus allowing specific targeting...
ДОПОЛНИТЕЛЬНОЕ ОБОРУДОВАНИЕ
4.2.5.- АВТОМАТИЗАЦИЯ АВТОМАТИЧЕСКОЙ СЕТИ УПРАВЛЕНИЯ СТРОИТЕЛЬСТВОМ ЗДАНИЙ
AEL-2
Лаборатория систем бытовой автоматизации
4.2.4.- КОММУНИКАЦИОННАЯ ШИНА / ЕВРОПЕЙСКАЯ ИНСТАЛЛЯЦИОННАЯ ШИНА / АВТОМАТИЗАЦИЯ ЗДАНИЙ
AEL-KNX2
Применение управления отоплением KNX / EIB
The KNX/EIB Heating Control Application, "AEL-KNX2", has been designed by Edibon to show the users the most important KNX elementsused in the most advanced heating control installations. Temperature control is carried out through temperature...
4.2.4.- КОММУНИКАЦИОННАЯ ШИНА / ЕВРОПЕЙСКАЯ ИНСТАЛЛЯЦИОННАЯ ШИНА / АВТОМАТИЗАЦИЯ ЗДАНИЙ
AEL-KNX3
Применение контроля безопасности KNX / EIB
The KNX/EIB Security Control Application, "AEL-KNX3", has been designed by Edibon to show the users the most important KNX elementsused in security alarm control systems with KNX technology.The purpose of the AEL-KNX3 is to give the students a...
4.2.4.- КОММУНИКАЦИОННАЯ ШИНА / ЕВРОПЕЙСКАЯ ИНСТАЛЛЯЦИОННАЯ ШИНА / АВТОМАТИЗАЦИЯ ЗДАНИЙ
AEL-KNX4
Применение управления освещением KNX / EIB
The KNX/EIB Lighting Control Application, "AEL-KNX4", has been designed by EDIBON to show the students the most important KNX elements used in the most advanced lighting control installations. Lighting control can be done through two methods:...
4.2.4.- КОММУНИКАЦИОННАЯ ШИНА / ЕВРОПЕЙСКАЯ ИНСТАЛЛЯЦИОННАЯ ШИНА / АВТОМАТИЗАЦИЯ ЗДАНИЙ
AEL-KNX5
Применение регулированием потребления энергии KNX / EIB
The KNX/EIB Energy Management Application, "AEL-KNX5", has been designed by Edibon to show the students the most important KNXelements used in the most advanced energy management systems.The purpose of the AEL-KNX5 is to give the students a...
4.2.5.- АВТОМАТИЗАЦИЯ АВТОМАТИЧЕСКОЙ СЕТИ УПРАВЛЕНИЯ СТРОИТЕЛЬСТВОМ ЗДАНИЙ
AEL-BCS
Применения автоматической сети управления строительством типа BacNet
The Building Automation and Control Networks BacNet Application, "AEL-BCS", is conceived in such a way to integrate cognitive and hands-on training into an overall concept linking together theory and practice and thus allowing specific targeting...
КАЧЕСТВО

ПОСЛЕПРОДАЖНОЕ ОБСЛУЖИВАНИЕ
