7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

ПРОДУКТЫ ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

Показано 1-23 из 23

UNIT TO STUDY THE ALIGNMENT OF DRIVES, SHAFTS AND GEARS - ADSG

ADSG

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

ADSG

Оборудование для выравнивания приводов, валов и шестерен

The Drive, Shaft, and Gear Alignment Unit, "ADSG", allows for studying the coupling and uncoupling, maintenance, repair of the related units and checking the operation with the following units:CGA. Combined Gear Assembly Unit.SGA. Spur Gear...

COMPUTER CONTROLLED MACHINE DIAGNOSIS UNIT - MDUC

MDUC

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDUC

Оборудование для диагностики машин, управляемое с компьютера (ПК)

The Computer Controlled Machine Diagnosis Unit, "MDUC", of EDIBON, allows you to perform vibration measurement practical exercises, measuring the displacement, velocity and acceleration of vibrations in the time-frequency range.The Computer...

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU

Диагностика машин

The family of Machine Diagnosis Unit, "MDU", of EDIBON, allows you to perform vibration measurement practical exercises, measuring the displacement, velocity and acceleration of vibrations in the time-frequency range.The MDU Base Unit, "MDU-UB",...

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-MLB

Мобильная структура для оборудования МДУ

Аксессуар MDU

The Mobile Structure for MDU, "MDU-MLB", is a robust structure designed to quickly and easily assemble the various elements of the MDU Base Unit, "MDU-UB" or the Computer Controlled Machine Diagnosis Unit, "MDUC", and thus assemble a mobile test...

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SM

Настольная структура для оборудования МДУ

Аксессуар MDU

A bench-top structure consisting of a slotted table with anodized aluminum frames of 1100 x 770 x 820 mm.It has a transparent protective cover that protects against the rotating parts and allows us to observe the different experiments. The cover...

SOFTWARE, SENSORS AND CONTROL FOR MDU UNIT - MDU-SSC

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SSC

Программное обеспечение, датчики и управление для оборудования МДУ

Аксессуар MDU

The Software, Sensors and Control for MDU Unit, "MDU-SSC" allows to perform all measurements and analyze vibrations.The aim of the vibration analyzer is to assess the machine diagnosis testing with the different sets related to the vibration...

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-BLU

Оборудование для торможения и нагрузки

Аксессуар MDU

The Break and Load Unit, "MDU-BLU", of EDIBON is a magnetic particle brake, a display unit and an electrical control. It is possible to precisely adjust the braking moment. The excitation current is used as a measurement of the braking moment and...

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SES

Набор упругого дерева

Аксессуар MDU

The Set of Elastic Shaft, "MDU-SES", of EDIBON allows to study the behavior of an elastic rotor subjected to imbalance and balance of elastic rotors in operation. It is possible to study the resonance and the phenomena occurred in subcritical and...

SET OF ROTATING SHAFT WITH CRANK - MDU-SRS

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SRS

Набор деревьев с трещиной

Аксессуар MDU

It is important that fissures resulting from material fatigue in rotating machines are detected in good time before the breakage occurs, which usually leads to fatal consequences.The Set of Rotating Shaft with Crank, "MDU-SRS", consists of two...

SET OF ROLLER BEARINGS WITH FAULTS - MDU-SRBF

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SRBF

Набор дефектов подшипников

Аксессуар MDU

To determine the remaining life cycle of a roller bearing and decide on its replacement, the slow variation of the vibration spectrum is analyzed. The spectral distribution will enable to draw accurate conclusions about the type of defect and its...

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SCO

Набор соединений

Аксессуар MDU

The Set of Couplings, "MDU-SCO", allows to compare the properties of different couplings such as curved tooth, bolt, flange and claw couplings.The vibrational behavior of the different types of couplings is important to draw conclusions about...

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SBD

Набор для передачи по ремню

Аксессуар MDU

The belt drives are noiseless drive devices, have a long life and require little maintenance provided that its design, assembly and adjustment are correct. The Set of Belt Drive, "MDU-SBD", allows to study the conditions that cause vibrations or...

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SSDG

Набор дефектов в шестернях

Аксессуар MDU

The Set to Study Damage in Gears, "MDU-SSDG", allows to study the vibrational behavior of gears with typical defects.For that purpose, gears with tooth defects and gears without defects are included, so a comparative study can be carried out. The...

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SCM

Набор для механизма шатун-кривошип

Аксессуар MDU

The compressors and pumps frequently use crank and connecting rod mechanisms. The force and mass oscillations cause vibrations in the units.The Set of Crank Mechanism, "MDU-SCM", allows to adjust the stroke, mass compensation and bearing...

SET TO STUDY CAVITATION IN PUMPS - MDU-SSCP

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SSCP

Набор кавитации в насосах

Аксессуар MDU

Pump cavitation is produced when steam cavities are created within a fluid in which forces act responding to the pressure differences.Cavitation causes noise, damage to components and loss of performance.The Set to Study Cavitation in Pumps,...

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SSVF

Набор вибраций в магистралях MDU

Аксессуар MDU

In the Blower Vibration Set for MDU, "MDU-SSVF", the vibrations are magnetically induced. It is possible to study three impellers with a different number of movable vanes. It is also possible to study the gyroscopic effect by mounting the flywheel...

SET OF ELECTROMECHANICAL VIBRATIONS - MDU-SEV

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SEV

Набор электромеханических вибраций

Аксессуар MDU

Among the drive systems are the asynchronous motors, which generate vibrations in machines.This is the case with an asymmetric air gap (space between rotor and stator), in which the magnetic vibrational forces induce torsional and bending...

DISPLACEMENT SENSORS FOR MDU UNIT - MDU-SD

Аксессуар MDU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDU-SD

Датчики перемещения для оборудования МДУ

Аксессуар MDU

Two displacement sensors which, together with the Set of Elastic Shaft ,"MDU-SES", and the Software, Sensors and Control for MDU Unit, "MDU-SSC", allow you to represent subcritical and supercritical shaft orbits in resonance.

COMPUTER CONTROLLED UNIT TO STUDY VIBRATIONS IN MACHINE SUPPORTING STRUCTURES - VMSC

VMSC

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

VMSC

Оборудование для изучения вибраций в опорах машин, управляемое компьютером (ПК)

nd various tunings are tested. The transmission of vibrations to the supporting structure is measured. An inductive displacement sensor is used to record the eccentricity of the imbalance masses.The unit has a frame, a supporting structure, and a...

MSCT

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MSCT

Оборудование для проверки резьбовых соединений

The Screw Joint Testing Unit, "MSCT", represents the simulation of a tightening set consisting of a screw and a nut on two rectangular shaped beams.A very precise torque wrench performs the tightening through a threaded rod and a flywheel. The...

MSLG

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MSLG

Оборудование для изучения зубчатой передачи для токарных станков

The Unit to Study Lathe Gears, "MSLG", represents the gears of a typical lathe in a machining workshop, including: a main adjustable transmission gear, one Norton gearbox for the machining of specific threads and pitches, a pinion switching gear...

BASIC UNIT OF MECHANICAL DRIVE SYSTEMS - MDSU

MDSU

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

MDSU

Базовое оборудование для механических приводных систем

The Basic Unit of Mechanical Drive Systems, "MDSU", consists of a main frame where a series of accessories and elements are arranged, distributed in modules of different level, thought to introduce the user in the field of mechanical systems and...

Available

7.4.3.- ТРЕНИНГ ПО МОНТАЖУ И НАЛАДКЕ

RGT

Учебное оборудование для такелажных работ

The Rigging Training Unit, "RGT", has been designed for the study of techniques to move loads of various shapes, sizes and types safely. The unit consists of an adjustable height gantry frame made of welded steel and beam attachment points. The...

ЧТОБЫ ПОЛУЧИТЬ БОЛЬШЕ ИНФОРМАЦИИ, СВЯЖИТЕСЬ С НАМИ