AE-PLC-MS 혼합 교육용 스테이션

6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
MIXING WORKSTATION - AE-PLC-MS

혁신적인 시스템

The Mixing Workstation, "AE-PLC-MS", has been designed by EDIBON to study how to manage a mixing system.

일반적인 설명보기

확장

ICAI

상호작용형 컴퓨터 지원 교육 소프트웨어

관련 뉴스

EDIBON and its commitment to European Skills
EDIBON and its commitment to European Skills
At EDIBON, we are committed to strengthening skills as a strategic pillar for the competitiveness and social well-being of the European Union. Proper training not only boosts the economy but also enables individuals to fully participate in society and democracy.
더 읽어보기

일반적인 설명

The Mixing Workstation, "AE-PLC-MS", designed by EDIBON, is a workstation commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different valves. The system is equipped with flow and level sensors in order to obtain a precise mixing.

The "AE-PLC-MS" workstation has been designed as a modular system to facilitate the understanding of the unit operation.

The main components are:

  • The PLC: is composed by the CPU limit and all extra modules needed to perform a corrent working of the workstation and all the extra modules needed to perform a correct working of the workstation.
  • The Control Panel: with start/stop button, emergency pushbutton, reset button, light indicators to show current state of the process, etc.
  • The Pneumatic Circuit: contains the required solenoid valves, the pressure components, the filters and regulators to assure the appropriate working of the workstation.
  • The Workstation: it is composed by real industrial components used by the rotary table systems such as reed sensors, presence sensors, DC motor, inductive sensors, rotary table with 8 positions, etc.

The "AE-PLC-MS" is an independent workstation that can work alone and/or in conjunction with other workstation to make up a complete Flexible Manufacturing System (*).

*The Flexible manufacturing systems product list is available at the "6.- MECHATRONICS and AUTOMATION" area.

연습 및 가이드

매뉴얼에 포함 된 가이드 실기 연습

  1. Introduction to flexible manufacturing system (FMS).
  2. Introduction to pneumatics and electro-pneumatics.
  3. Introduction to vacuum technology.
  4. Study of the sensor detection.
  5. Configuration of a pneumatic application.
  6. Manual control of the automatic mixing system.
  7. Automatic control of the automatic mixing system.
  8. Modification of the automatic mixing system parameters.
  9. Optimization of the process time.
  10. Study and analysis of the faults inserted in the process with the fault generation module.

필수 구성 요소

추천되는 요소들

비슷한 제품

FILTRATION WORKSTATION - AE-PLC-FT
  • AE-PLC-FT
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-FT
여과 교육용 스테이션
The Filtering Workstation, "AE-PLC-FT", designed by EDIBON, is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the...
뷰 유닛
PUNCHING WORKSTATION - AE-PLC-PHD
  • AE-PLC-PHD
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-PHD
펀칭 교육용 스테이션
The Punching Workstation, "AE-PLC-PHD", designed by EDIBON, is a workstation commanded by a PLC. This workstation takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the...
뷰 유닛
FILLING WORKSTATION - AE-PLC-FS
  • AE-PLC-FS
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-FS
충전 교육용 스테이션
The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....
뷰 유닛
CORKING WORKSTATION - AE-PLC-CRS
  • AE-PLC-CRS
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-CRS
코르크 마개 교육용 스테이션
The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...
뷰 유닛
BOTTLE OPENING WORKSTATION - AE-PLC-APB
  • AE-PLC-APB
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-APB
캔 개봉 교육용 스테이션
The "AE-PLC-APB" is a bottles opening system commanded by a PLC. The unit is equipped with different containers and a retention system based on a cylinder, in order to allow the Robotic Arm Workstation "AE-BR" or the SCARA Arm Workstation "AE-SCA"...
뷰 유닛
MOUNTING WORKSTATION - AE-PLC-M
  • AE-PLC-M
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-M
조립 교육용 스테이션
The Mounting Workstation, "AE-PLC-M", designed by EDIBON, is a workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take...
뷰 유닛
AUTOMATIC PRESSING WORKSTATION - AE-PLC-P
  • AE-PLC-P
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-P
자동 프레스 교육용 스테이션
The Automatic Pressing Workstation, "AE-PLC-P", designed by EDIBON, is an workstation commanded by a PLC. The "AE-PLC-P" moves the pieces from the input zone to the pressing zone, once the piece is detected in the pressing zone, the "AE-PLC-P"...
뷰 유닛
AUTOMATIC SCREW WORKSTATION - AE-PLC-AT
  • AE-PLC-AT
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-AT
자동 나사 조임 교육용 스테이션
The Automatic Screwdriving Workstation, "AE-PLC-AT", designed by EDIBON, is an automatic screw workstation commanded by a PLC that supply and mount four screws in a piece.The "AE-PLC-AT" keeps the screws in a vertical storage. The workstation take...
뷰 유닛
BOTTLING WORKSTATION - AE-PLC-MEMB
  • AE-PLC-MEMB
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-MEMB
병입 교육용 스테이션
The Bottling Workstation, "AE-PLC-MEMB", designed by EDIBON, is an automatic rotary table with a vessel feeding system, a controlled water filling system, a cap feeder, a vessel closing system, and finally, an extraction system to a complete...
뷰 유닛
LABELLING WORKSTATION - AE-PLC-MET
  • AE-PLC-MET
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-MET
라벨링 교육용 스테이션
The The Labelling Process Workstation, "AE-PLC-MET", designed by EDIBON, is an workstation commanded by a PLC. The "AE-PLC-MET" also include a transporting system that carries the incoming bottles to the labelling zone, supplying the bottles one...
뷰 유닛
DRILLING WORKSTATION - AE-PLC-ST
  • AE-PLC-ST
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-ST
드릴링 교육용 스테이션
The Drilling Workstation, "AE-PLC-ST", designed by EDIBON, is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine...
뷰 유닛
MOLDING WORKSTATION - AE-PLC-SMOLD
  • AE-PLC-SMOLD
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-SMOLD
성형 교육용 스테이션
The Molding Workstation, "AE-PLC-SMOLD", designed by EDIBON, is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a...
뷰 유닛
CUTTING WORKSTATION - AE-PLC-SCOR
  • AE-PLC-SCOR
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-SCOR
절단 교육용 스테이션
The Cutting Workstation "AE-PLC-SCOR", designed by EDIBON, is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine...
뷰 유닛
CONTROL PROCESSES WORKSTATION - AE-PLC-CP
  • AE-PLC-CP
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-CP
공정 제어 교육용 스테이션
The Process Control Workstation, "AE-PLC-CP", designed by EDIBON, is a process control workstation commanded by a PLC that coordinates.The "AE-PLC-CP" workstation is designed as a modular system to facilitate the understanding of the unit.The main...
뷰 유닛

품질

판매 후 서비스

정보 요청